INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL SUSPENSION CONTROL SWITCH (CRAWL SWITCH) |
 |
- Attach the 4 claws to install the suspension control switch (CRAWL switch).
Connect the 2 connectors.
| 2.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
- Connect the connectors.
Attach the 14 claws to install the console panel.
| 3.
INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
|
 |
- Attach the 4 claws to install the box.
| 4.
INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
- Attach the 9 claws to install the panel.
| 5.
INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
|
 |
- Connect the connectors.
Attach the 7 claws to install the panel.
| 6.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
Install the shift lever knob and twist it in the direction indicated by the arrow.


| 7.
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
|
 |
- Attach the 7 claws to install the panel pad.
Install the screw.
Install the clip.
| 8.
INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
|
 |
- Attach the 7 claws to install the panel cushion.
| 9.
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
|
 |
- Connect the connectors and 2 clamps.
Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
| 10.
INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
|
 |
- Attach the 7 claws to install the panel cushion.
| 11.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).