INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for the LHD and RHD.
- The procedures listed below are for the LHD.
- Use the same procedures for the LHD and RHD.
| 1. INSTALL REAR SEAT INNER BELT ASSEMBLY |
![]() ![]() |
Install the seat belt with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- The anchor part of the seat belt must not overlap the protruding part.
| 2. INSTALL REAR NO. 1 SEAT RECLINING COVER RH |
![]() ![]() |
Attach the 4 claws to install the cover.
Install the 2 screws.
| 3. INSTALL REAR NO. 1 SEAT ASSEMBLY LH |
Install the rear No. 1 seat assembly (Click here).



