REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for the LHD and RHD.
- The procedures listed below are for the LHD.
- Use the same procedures for the LHD and RHD.
| 1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH |
Remove the rear No. 1 seat assembly (Click here).
| 2. REMOVE REAR NO. 1 SEAT RECLINING COVER RH |
![]() ![]() |
Remove the 2 screws.
Detach the 3 claws in the order shown in the illustration, and then remove the cover.
| 3. REMOVE REAR SEAT INNER BELT ASSEMBLY |
![]() ![]() |
Remove the bolt and belt.



