2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE FUEL TANK SUB-ASSEMBLY
(Click here)

2. REMOVE FUEL PUMP ECU

  1. A274072E01
    Disconnect the fuel pump ECU connector.

    1. Press the claw and move the lever in the direction of the arrow in the illustration.*1

    2. Disconnect the fuel pump ECU connector.*2

  1. Detach the wire harness clamp.

  1. Remove the bolt and fuel pump ECU.

    NOTICE:
    Make sure the fuel pump ECU is not subjected to physical shocks such as being dropped, etc.


3. REMOVE FUEL PUMP ECU BRACKET
  1. Remove the 2 screws and fuel pump ECU bracket.

← COMPONENTS (from Jan 2012)INSTALLATION (from Jan 2012) →