2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

Fuel pressure
Standard fuel pressure
at idle
281 to 287 kPa
(2.87 to 2.93 kgf/cm2, 41 to 42 psi)
remains for 5 minutes after engine has stopped
147kPa
(1.5 kgf/cm2, 21 psi) or more
Fuel injector
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
11.6 to 12.4 Ω
Injection volume
71 to 86 cm3 (4.3 to 5.2 cu. in.) per 15 seconds
Difference between each cylinder
15 cm3 (0.9 cu. in.) or less
Fuel leakage
1 drop or less per 12 minutes
Fuel pump (for Single Tank Type)
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
0.2 to 3.0 Ω
Fuel pump (for Double Tank Type)
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
0.2 to 3.0 Ω
Fuel sender gauge assembly
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
Float level is F (upper)
13.5 to 16.5 Ω
Float level is E (lower)
405.5 to 414.5 Ω
Fuel sender gauge assembly (for Fuel Sub Tank)
Standard resistance
Tester Connection
Condition
Specified Condition
2 - 3
Float level is F (upper)
12 to 18 Ω
Float level is E (lower)
405 to 415 Ω
← TORQUE SPECIFICATIONS (from Jan 2012)SERVICE DATA (from Jan 2012) →