SERVICE DATA
Specifications · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| Fuel pressure |
Standard fuel pressure |
at idle |
321 to 327 kPa (3.27 to 3.33 kgf/cm2, 46.5 to 47.4 psi) |
|
| remains for 5 minutes after engine has stopped |
147kPa (1.5 kgf/cm2, 21 psi) or more |
|||
| Fuel injector |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
11.6 to 12.4 Ω |
||
| Injection volume |
71 to 86 cc (4.3 to 5.2 cu. in.) per 15 seconds |
|||
| Difference between each cylinder |
15 cc (0.9 cu. in.) or less |
|||
| Fuel leakage |
1 drop or less per 12 minutes |
|||
| Fuel pump |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
0.2 to 3.0 Ω |
||
| Fuel sender gauge assembly |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
Float level is F (upper) |
13.5 to 16.5 Ω |
||
| Float level is E (lower) |
405.5 to 414.5 Ω |
|||
| Fuel sender gauge assembly (for Fuel Sub Tank) |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 2 - 3 |
Float level is F (upper) |
12 to 18 Ω |
||
| Float level is E (lower) |
405 to 415 Ω |
|||