INSPECTION
Inspection · Vehicles built from Jan 2012
| INSPECT MAIN SWITCH ASSEMBLY |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
4 (ECU) - 3 (IG)
Main switch assembly on
Below 1 Ω
4 (ECU) - 3 (IG)
Main switch assembly off
10 kΩ or higher
If the result is not as specified, replace the main switch assembly .Text in Illustration *1
Component without harness connected
(Main Switch assembly)
