2011-2013 Land Cruiser · Service Manual Vehicle Exterior

B2225 Back Door Motor Clutch Malfunction

Diagnostic trouble codes · Vehicles built from Jan 2012

DESCRIPTION

When a voltage and current malfunction (open or short) is detected in the clutch circuit of the power back door unit assembly (power back door ECU) while the power back door is operating, the power back door unit assembly (power back door ECU) outputs DTC B2225.
DTC Code
DTC Detection Condition
Trouble Area
B2225
Voltage and current malfunction in clutch circuit of power back door unit
Power back door unit assembly (power back door ECU)

INSPECTION PROCEDURE


1. CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B2225 is not output.



NG
REPLACE POWER BACK DOOR UNIT ASSEMBLY (POWER BACK DOOR ECU) (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B2222 PBD Pulse Sensor Malfunction (from Jan 2012)B2250 Back Door Closer Operation Malfunction (from Jan 2012) →