REMOVAL
Removal / installation · Vehicles built from Jan 2012
| 1.
REMOVE LOWER BACK DOOR STOPPER CUSHION
|
 |
- Remove the 4 bolts and 2 lower back door stopper cushions.
| 2.
REMOVE CENTER BACK DOOR GARNISH
|
 |
- Detach the 5 clips and 4 claws, and remove the center back door garnish.
| 3.
REMOVE BACK DOOR SIDE GARNISH LH
|
 |
- Detach the 3 clips and 2 claws, and remove the back door side garnish LH.
| 4.
REMOVE BACK DOOR SIDE GARNISH RH
|
 |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
- w/ Power Back Door:
Detach the clip and 4 claws, and remove the back door side garnish RH.
| 5.
REMOVE BACK DOOR GARNISH
|
 |
- Using a screwdriver, detach the 14 clips and remove the back door garnish.
- HINT:
- Tape the screwdriver tip before use.
| 6.
REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH |
 |
- Disconnect the connector.
- Using a T25 "TORX" wrench, remove the 6 screws.
Detach the 2 clips and remove the power back door sensor assembly LH.
| 7.
REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH |
 |
- HINT:
- Use the same procedure described for the LH side.