2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Jan 2012


INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH

  1. B313315E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1(OSL) - 2(OSLE)
    Not pressed
    Approximately 1 kΩ
    Pressed
    Below 100 Ω

    If the result is not as specified, replace the power back door sensor assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Power Back Door Sensor Assembly LH)
    *b
    Pressed
    *c
    Not Pressed


INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH

  1. B313315E02
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1(OSR) - 2(OSRE)
    Not pressed
    Approximately 1 kΩ
    Pressed
    Below 100 Ω

    If the result is not as specified, replace the power back door sensor assembly RH.
    Text in Illustration 
    *a
    Component without harness connected
    (Power Back Door Sensor Assembly RH)
    *b
    Pressed
    *c
    Not Pressed

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →