2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012


1. INSTALL BACK DOOR CONTROL SWITCH
  1. Attach the 4 claws to install the back door control switch.

  1. Connect the connector.


2. INSTALL BACK DOOR GARNISH
  1. Attach the 14 clips to install the back door garnish.


3. INSTALL BACK DOOR SIDE GARNISH LH
  1. Attach the 3 clips and 2 claws to install the back door side garnish LH.


4. INSTALL BACK DOOR SIDE GARNISH RH
  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. w/ Power Back Door:

    1. Attach the clip and 4 claws to install the back door side garnish RH.


5. INSTALL CENTER BACK DOOR GARNISH
  1. Attach the 5 clips and 4 claws to install the center back door garnish.

← INSPECTION (from Jan 2012)COMPONENTS (from Jan 2012) →