2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE CENTER BACK DOOR GARNISH

  1. B313300
    Detach the 5 clips and 4 claws, and remove the center back door garnish.


2. REMOVE BACK DOOR SIDE GARNISH LH

  1. B313301
    Detach the 3 clips and 2 claws, and remove the back door side garnish LH.


3. REMOVE BACK DOOR SIDE GARNISH RH
  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. B313302
    w/ Power Back Door:

    1. Detach the clip and 4 claws, and remove the back door side garnish RH.


4. REMOVE BACK DOOR GARNISH

  1. B181329
    Using a screwdriver, detach the 14 clips and remove the back door garnish.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE BACK DOOR CONTROL SWITCH
  1. Disconnect the connector.

  1. B191292
    Detach the 4 claws and remove the back door control switch.

← COMPONENTS (from Jan 2012)INSPECTION (from Jan 2012) →