B15B0 Display Screen Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
This DTC is stored when a malfunction occurs in the television display assembly.| DTC Code |
DTC Detection Condition |
Trouble Area |
| B15B0 |
When either condition below is met:
|
|
INSPECTION PROCEDURE
| 1. CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 2. RECHECK DTC |
Recheck for DTCs (Click here).
Result Result
Proceed to
DTC B15B0 is not output.
A
DTC B15B0 is output.
B
- HINT:
- This DTC is output from the multi-media module receiver assembly or television display assembly.
- When the DTC is checked using the intelligent tester, whether the DTC is output from the multi-media module receiver assembly, or whether it is output from the television display assembly, cannot be distinguished. For this reason, recheck the DTC using the "System Check Mode" screen.
- This DTC is output from the multi-media module receiver assembly or television display assembly.
Enter diagnostic mode and display the "Service Menu" screen (Click here).
Select "Failure Diagnosis Service Check" on the "Service Menu" screen to display the "Failure Diagnosis Service Check" screen.
Select "Service Check Mode" on the "Failure Diagnosis Service Check" screen and perform the service check.
Recheck for DTCs and proceed to the next step according to the table below (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output from the multi-media module receiver assembly.
B
DTC is output from a television display assembly.
C
|
|
||||
|
|
||||
| A | ||
| ||
