REMOVAL
Removal / installation · Vehicles built from Jan 2012
| 1. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
| 2. REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR |
![]() ![]() |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
| *A |
for Bank 1 |
| *B |
for Bank 2 |
Using a 14 mm union nut wrench, remove the 2 No. 4 exhaust gas temperature sensors.
| 3. REMOVE MONOLITHIC CONVERTER ASSEMBLY |
| 4. REMOVE EXHAUST GAS TEMPERATURE SENSOR |
![]() ![]() |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
| *A |
for Bank 1 |
| *B |
for Bank 2 |
Using a 14 mm union nut wrench, remove the 2 exhaust gas temperature sensors.
| 5. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1) |
![]() ![]() |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.
| 6. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2) |
![]() ![]() |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.





