2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

U0073 Sending Malfunction (Navigation to APGS)

Diagnostic trouble codes · Vehicles built from Jan 2012

Also covers:

DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.
DTC Code
DTC Detection Condition
Trouble Area
U0073
CAN bus connection error
CAN communication system
U0100
CAN reception error
U0126
CAN reception error
U0140
CAN reception error
U0155
CAN reception error
U1110
CAN reception error

INSPECTION PROCEDURE


1. CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2. CHECK DTC (CAN COMMUNICATION SYSTEM)
  1. Recheck for DTCs and check if the same DTCs are output again.

    1. for LHD: Click here
    2. for RHD: Click here
    Result 
    Result
    Proceed to
    No DTCs are output
    A
    DTCs are output (for LHD)
    B
    DTCs are output (for RHD)
    C



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← C1610 Camera ECU Malfunction (from Jan 2012)Illumination for Panel Switch does not Come on with Tail Switch ON (from Jan 2012) →