INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
INSTALL TRANSPONDER KEY AMPLIFIER |
 |
- Connect the transponder key amplifier connector.
Align the claw of the transponder key amplifier with the upper bracket.
Push in the transponder key amplifier and install it to the upper bracket.
- NOTICE:
- Do not push in the transponder key amplifier with excessive force as it may be damaged.
| 2.
INSTALL UPPER STEERING COLUMN COVER
|
 |
- Attach the claw to install the upper steering column cover.
Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.
| 3.
INSTALL LOWER STEERING COLUMN COVER
|
 |
- Attach the 2 claws to install the lower steering column cover.
- NOTICE:
- Do not damage the tilt and telescopic switch.
Install the 3 screws.
-
Torque:
- 2.0 N*m{
20 kgf*cm
, 18 in.*lbf
}