2011-2013 Land Cruiser · Service Manual Vehicle Interior

INITIALIZATION

Troubleshooting · Vehicles built from Jan 2012


INITIALIZATION SERVO MOTOR
  1. Turn the engine switch off.

  2. Connect the intelligent tester to the DLC3.

  3. Turn the engine switch on (IG).

  4. Press the blower OFF switch.

  5. Turn the intelligent tester on.

  6. Enter the following menus: Body / Air Conditioner / Utility / Servomotor Initialization.

  7. According to the intelligent tester display, perform servomotor initialization.

    HINT:
    During initialization, the AUTO indicator light comes on, and then goes off when initialization has finished.

  8. According to the intelligent tester display, select the "Exit" switch to finish initialization.

← CUSTOMIZE PARAMETERS (from Jan 2012)PROBLEM SYMPTOMS TABLE (Sep 2011 – Dec 2011) →