2011-2013 Land Cruiser · Service Manual Vehicle Interior

PRECAUTION

Precautions · Vehicles built from Sep 2011


1.PRECAUTIONS FOR REPLACEMENT

NOTICE:
When replacing electronic parts, if there is a possibility that your body may contact a circuit board, etc., observe all precautions to prevent damage to the system by electrostatic discharge (ESD).

  1. Procedures where static electricity
    countermeasures are necessary:

    1. Center cluster module circuit replacement.

    2. Internal wiring connection/disconnection, inspection and replacement.

  2. General precautions:

    1. Before performing any procedures, touch an unpainted metal part or ground bolt of the vehicle to discharge any static electricity.

    2. To prevent damage to electrical equipment, disconnect the battery power supply before removing or installing electrical equipment.

    3. Never touch the electronic parts of a circuit board or the pins of an integrated circuit.

    4. When performing procedures, do not allow clothing to come near or contact parts.

← INSTALLATION (from Jan 2012)COMPONENTS (from Sep 2011) →