INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET |
Connect the connectors.
Insert the radio receiver and attach the 8 claws on its backside.

- NOTICE:
- When inserting the radio receiver, do not press the knobs on it.
Install the radio receiver with the 4 bolts.
| 2. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() ![]() |
Connect the connector.
Attach the 6 claws to install the No. 4 instrument panel register.
| 3. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() ![]() |
Connect the connector.
Attach the 6 claws to install the No. 3 instrument panel register.
| 4. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY |
![]() ![]() |
Attach the 8 claws to install the opening cover.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



