2011-2013 Land Cruiser · Service Manual Vehicle Interior

REASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. INSTALL CONTROL KNOB SUB-ASSEMBLY

E213384
  1. Attach the 10 claws to install the control knob sub-assembly.


2. INSTALL CENTER CLUSTER MODULE CIRCUIT

E215208

NOTICE:
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.

  1. Install new packing.

  1. Install the center cluster module circuit.


3. INSTALL LOWER HEATER CONTROL BASE

E213381
  1. Attach the 7 claws to install the lower heater control base.

  1. Install the 2 screws.

← DISASSEMBLY (from Sep 2011)INSTALLATION (Sep 2011 – Dec 2011) →