Removal / installation · Vehicles built from Sep 2011
1.
REMOVE LOWER HEATER CONTROL BASE
NOTICE:
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Detach the 6 claws.
Remove the 3 screws and lower heater control base.
2.
REMOVE CENTER CLUSTER MODULE CIRCUIT
NOTICE:
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Remove the 2 screws and center cluster module circuit.
3.
REMOVE HEATER CONTROL GUARD
Remove the heater control guard.
Text in Illustration
*1
Heater Control Guard
4.
REMOVE HEATER CONTROL KNOB
Detach the 8 claws and remove the heater control knob.
5.
REMOVE CENTER CLUSTER MODULE LENS
Remove the double-sided tape and center cluster module lens.