REMOVAL
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE FRONT SEAT ASSEMBLY RH |
| 2. REMOVE FRONT DOOR SCUFF PLATE LH |
![]() ![]() |
Detach the 7 claws and 4 clips, and remove the scuff plate.
| 3. REMOVE REAR STEP COVER |
![]() ![]() |
- HINT:
- Use the same procedure to remove the step cover on the other side.
Detach the 2 claws and remove the step cover.
| 4. REMOVE REAR DOOR SCUFF PLATE LH |
![]() ![]() |
Remove the screw.
Detach the 3 claws and 4 clips, and remove the scuff plate.
| 5. REMOVE CENTER PILLAR GARNISH COVER LH |
- HINT:
- for Manual Seat:
When removing the center pillar garnish cover, move the front seat and seatback to the foremost upright position.
- for Power Seat:
When removing the center pillar garnish cover, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
- for Power Seat:
After moving the front seat, disconnect the cable from the negative (-) battery terminal.
- for Manual Seat:
Detach the 2 clips and 2 guides, and remove the cover.

| 6. REMOVE CENTER LOWER PILLAR GARNISH LH |
Remove the bolt and seat belt anchor.

Detach the 3 claws and 6 clips, and remove the center lower pillar garnish LH.

| 7. REMOVE REAR ASSIST GRIP ASSEMBLY |
![]() ![]() |
- HINT:
- Use the same procedure to remove the rear assist grip on the other side.
Detach the 4 claws and remove the 2 assist grip plugs.
Remove the 2 bolts.

Detach the 2 claws and remove the rear assist grip.
| 8. REMOVE CENTER PILLAR GARNISH LH |
![]() ![]() |
Remove the bolt.
Detach the 2 clips and 2 guides.
Pass the seat belt anchor through the center pillar garnish, and remove the center pillar garnish.
| 9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH |
Remove the nut and shoulder anchor.

Remove the bolt and front seat outer belt assembly LH.

| 10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY |
Remove the 2 bolts and front shoulder belt anchor adjuster assembly.

| 11. REMOVE FRONT SEAT OUTER LAP BELT SUB-ASSEMBLY |
Remove the bolt and front seat outer lap belt sub-assembly.






