INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH |
Temporarily install the rear No. 1 seat inner belt assembly RH.

- NOTICE:
- Do not allow the anchor part of the rear No. 1 seat inner belt assembly RH to overlap the protruding parts of the rear seat.
Text in Illustration *1
Protruding Part
| 2. INSTALL REAR SEAT OUTER BELT ASSEMBLY |
Install the rear seat outer belt assembly with the bolt.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not allow the anchor part of the rear No. 1 seat outer belt assembly to overlap the protruding parts of the rear seat inner belt assembly RH.
Text in Illustration *1
Protruding Part
| 3. INSTALL NO. 1 SEAT INNER BELT ASSEMBLY LH |
Temporarily install the rear No. 1 seat inner belt assembly LH.

- NOTICE:
- Do not allow the anchor part of the rear No. 1 seat inner belt assembly LH to overlap the protruding parts of the rear seat.
Text in Illustration *1
Protruding Part
| 4. INSTALL REAR SEAT INNER BELT ASSEMBLY |
Install the rear seat inner belt assembly with the bolt.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the rear No. 1 seat inner belt assembly LH.
Text in Illustration *1
Protruding Part
Close the 2 fasteners and attach the fastening tape.

Text in Illustration *1
Fastener
*2
Fastening Tape
| 5. INSTALL FOLD SEAT STOPPER BAND ASSEMBLY |
Install the fold seat stopper band assembly together with the rear seat cushion with the screw.
| 6. INSTALL REAR SEAT CUSHION |
Install the rear seat cushion with the screw.
| 7. INSTALL REAR NO. 1 SEAT ASSEMBLY |
