2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Sep 2011

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER

B292796
  1. Detach the 6 claws and remove the rear seat No. 3 cushion hinge cover.


2. REMOVE REAR SEAT NO. 4 CUSHION HINGE COVER

B292795
  1. Detach the 6 claws and remove the rear seat No. 4 cushion hinge cover.


3. REMOVE REAR SEAT NO. 1 CUSHION HINGE COVER
  1. Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.

  1. B292797
    Detach the 3 claws and remove the rear seat No. 1 cushion hinge cover.


4. REMOVE REAR SEAT NO. 2 CUSHION HINGE COVER

B292798
  1. Detach the 3 claws and remove the rear seat No. 2 cushion hinge cover.


5. REMOVE REAR NO. 1 SEAT ASSEMBLY
  1. Return the rear No. 1 seat assembly to its original position.

  1. B292799
    Remove the 2 bolts.

  1. Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.

  1. B292800
    Remove the 2 bolts and rear No. 1 seat assembly from the vehicle.

    NOTICE:
    Be careful not to damage the vehicle body.


6. REMOVE REAR STEP COVER

B181673

HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.


7. REMOVE REAR DOOR SCUFF PLATE LH

B181674
  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.


8. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedures described for the LH side.


9. REMOVE REAR SEAT NO. 2 PROTECTOR

HINT:
Use the same procedure to remove the rear seat No. 2 protector on the other side.

  1. B292801
    Detach the 4 claws and remove the rear seat No. 2 protector from the rear seat cushion lock striker sub-assembly.


10. REMOVE REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY

HINT:
Use the same procedure to remove the rear seat cushion lock striker sub-assembly on the other side.

  1. B292804
    Detach the fastener and fold back the front floor carpet.

  1. B292806
    Fold back the rear floor silencer.

  1. B292802
    Remove the 2 bolts and rear seat cushion lock striker sub-assembly.


11. REMOVE REAR SEAT CUSHION HOLDER BRACKET

HINT:
Use the same procedure to remove the rear seat cushion holder bracket on the other side.

  1. B292803
    Remove the 2 bolts and rear seat cushion holder bracket.

← COMPONENTS (from Sep 2011)DISASSEMBLY (from Sep 2011) →