2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

FREEZE FRAME DATA

Troubleshooting · Vehicles built from Jan 2012


CHECK FREEZE FRAME DATA
  1. Connect the intelligent tester to the DLC3.

  2. Start the engine.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Navigation System / DTCs.

  5. Select a Trouble Code to display its Freeze Frame Data.


LIST OF FREEZE FRAME DATA
  1. Refer to "Data List / Active Test" (Click here).

← DTC CHECK / CLEAR (from Jan 2012)DATA LIST / ACTIVE TEST (from Jan 2012) →