REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY |
Remove the 2 screws.

Disconnect the connector and then remove the back door opener switch assembly.
| 2. REMOVE ASSIST GRIP (for Face to Face Seat Type) |
Remove the 2 screws and assist grip.

| 3. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type) |
Using a screwdriver, detach the 4 claws and remove the back door service hole cover.

Disconnect connector.
| 4. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type) |
Detach the 2 claws and remove the door opening switch sub-assembly.

