INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT BACK DOOR OPENER SWITCH ASSEMBLY |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 (UL) - 2 (L)
Lock switch Pushed
Below 1 Ω
1 (UL) - 2 (L)
3 (B) - 2 (L)
Not pushed
10 kΩ or higher
3 (B) - 2 (L)
Open switch Pushed
Below 1 Ω
- If the result is not as specified, replace the back door opener switch assembly.
| INSPECT DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type) |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 (E) - 2 (B)
Not pushed
10 kΩ or higher
1 (E) - 2 (B)
Pushed
Below 1 Ω
