Home › Vehicle Exterior › BODY DIMENSIONS › FRAME › 2014.08–2018.08
BM2660E _01 Vehicle Exterior _054375 BODY DIMENSIONS _0264574 FRAME F

BODY DIMENSIONS  FRAME  THREE-DIMENSIONAL DISTANCE  


Upper Face


HINT:

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front bamper extension No. 2 installation bolt M10 (0.39)
B, b No. 1 body mounting hole φ26 (1.02)
C, c Front spring support hole φ12.2 (0.480)
D, d No. 2 body mounting hole φ43 (1.69)
E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
F, f No. 3 body mounting hole φ43 (1.69)
G, g No. 4 body mounting hole φ43 (1.69)

K127122C01
0.125,2.188 0.438,2.344 0.313,0.156 10 false *A 0.115,3.115 0.427,3.271 0.313,0.156 10 false *B 0.219,5.396 0.427,5.656 0.208,0.26 10 false *C 6.563,7.354 6.729,7.583 0.167,0.229 10 false *a 6.635,8.521 6.948,8.677 0.313,0.156 10 false *b
*A RH *B LH
*C Front - -
*a Imaginary Datum Line *b mm
(in.)



Lower Face


HINT:

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front bamper extension No. 2 installation bolt M10 (0.39)
B, b Front stabilizer bracket installation nut M12 (0.47)
C, c Suspension lower arm installation hole - rear 42X24 (1.65X0.94)
D, d Suspension lower arm installation hole - front 36.5X18.5 (1.437X0.728)
E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
F, f Lower control arm installation hole - inner φ16.5 (0.650)
G, g Upper control arm installation hole - inner φ14.5 (0.571)
H, h Rear shock absorber installation hole φ29.5 (1.161)
I Lateral control rod installation hole - front φ15 (0.59)
J, j Transport hook installation nut M12 (0.47)

K154651C02
0.115,2.229 0.427,2.385 0.313,0.156 10 false *A 0.115,3.135 0.427,3.292 0.313,0.156 10 false *B 0.229,5.385 0.448,5.615 0.219,0.229 10 false *C 6.51,7.344 6.667,7.635 0.156,0.292 10 false *b 6.76,8.542 6.969,8.74 0.208,0.198 10 false *f 2.76,4.406 2.969,4.604 0.208,0.198 10 false *c 1,7.385 1.208,7.583 0.208,0.198 10 false *c 1.542,7.677 1.75,7.875 0.208,0.198 10 false *d 2.469,7.667 2.677,7.865 0.208,0.198 10 false *e
*A RH *B LH
*C Front - -
*b Imaginary Datum Line *c Vehicle Dimensions
*d Heavy Duty *e Light Duty
*f mm
(in.)
- -



Upper Face (w/ Kinetic Dynamic Suspension System)


HINT:

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front bamper extension No. 2 installation bolt M10 (0.39)
B, b No. 1 body mounting hole φ26 (1.02)
C, c Front spring support hole φ12.2 (0.480)
D, d No. 2 body mounting hole φ43 (1.69)
E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
F, f No. 3 body mounting hole φ43 (1.69)
G, g No. 4 body mounting hole φ43 (1.69)

K127124C01
0.115,2.188 0.427,2.344 0.313,0.156 10 false *A 0.115,3.135 0.427,3.292 0.313,0.156 10 false *B 0.24,5.396 0.448,5.625 0.208,0.229 10 false *C 6.542,7.365 6.771,7.604 0.229,0.24 10 false *a 6.656,8.552 6.969,8.708 0.313,0.156 10 false *b
*A RH *B LH
*C Front - -
*a Imaginary Datum Line *b mm
(in.)



Lower Face (w/ Kinetic Dynamic Suspension System)


HINT:

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front bamper extension No. 2 installation bolt M10 (0.39)
B, b Front stabilizer bracket installation nut M12 (0.47)
C, c Kinetic Dynamic Suspension System bracket installation hole φ18.5 (0.728)
D, d Suspension lower arm installation hole - rear 42X24 (1.65X0.94)
E, e Suspension lower arm installation hole - front 36.5X18.5(1.437X0.728)
F, f Side rail inner channel standard hole 16X16 (0.63X0.63)
G, g Lower control arm installation hole - inner φ16.5 (0.650)
H, h Upper control arm installation hole - inner φ14.5 (0.571)
I, i Rear shock absorber installation hole φ29.5 (1.161)
J Lateral control rod installation hole - front φ15 (0.59)
K, k Transport hook installation nut M12 (0.47)

K154652C02
0.135,2.198 0.448,2.354 0.313,0.156 10 false *A 0.135,3.115 0.448,3.271 0.313,0.156 10 false *B 0.229,5.375 0.458,5.604 0.229,0.229 10 false *C 2.792,4.438 3.104,4.594 0.313,0.156 10 false *c 6.698,8.552 7.01,8.708 0.313,0.156 10 false *f 6.531,7.344 6.719,7.583 0.188,0.24 10 false *b 1,7.448 1.313,7.604 0.313,0.156 10 false *c 1.5,7.656 1.813,7.813 0.313,0.156 10 false *d 2.542,7.667 2.854,7.823 0.313,0.156 10 false *e
*A RH *B LH
*C Front - -
*b Imaginary Datum Line *c Vehicle Dimensions
*d Heavy Duty *e Light Duty
*f mm
(in.)
- -



Upper Face (w/ Winch)


HINT:

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Winch bracket installation nut M12 (0.47)
B, b No. 1 body mounting hole φ26 (1.02)
C, c Front spring support hole φ12.2 (0.480)
D, d No. 2 body mounting hole φ43 (1.69)
E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
F, f No. 3 body mounting hole φ43 (1.69)
G, g No. 4 body mounting hole φ43 (1.69)

K127126C01
0.125,2.177 0.333,2.417 0.208,0.24 10 false *A 0.104,3.156 0.323,3.375 0.219,0.219 10 false *B 0.24,5.344 0.49,5.542 0.25,0.198 10 false *C 6.552,7.323 6.771,7.563 0.219,0.24 10 false *a 6.688,8.552 7,8.708 0.313,0.156 10 false *b
*A RH *B LH
*C Front - -
*a Imaginary Datum Line *b mm
(in.)



Lower Face (w/ Winch)


HINT:

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Winch bracket installation nut M12 (0.47)
B, b Front stabilizer bracket installation nut M12 (0.47)
C, c Suspension lower arm installation hole - rear 42X24 (1.65X0.94)
D, d Suspension lower arm installation hole - front 36.5X18.5 (1.437X0.728)
E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
F, f Lower control arm installation hole - inner φ16.5 (0.650)
G, g Upper control arm installation hole - inner φ14.5 (0.571)
H, h Rear shock absorber installation hole φ29.5 (1.161)
I Lateral control rod installation hole - front φ15 (0.59)
J, j Transport hook installation nut M12 (0.47)

K154653C02
0.094,2.219 0.406,2.375 0.313,0.156 10 false *A 0.125,3.156 0.438,3.313 0.313,0.156 10 false *B 0.24,5.385 0.552,5.542 0.313,0.156 10 false *C 6.521,7.375 6.781,7.635 0.26,0.26 10 false *b 2.833,4.396 3.146,4.552 0.313,0.156 10 false *c 6.656,8.542 6.969,8.698 0.313,0.156 10 false *f 1,7.417 1.313,7.573 0.313,0.156 10 false *c 1.521,7.656 1.833,7.813 0.313,0.156 10 false *d 2.5,7.656 2.813,7.813 0.313,0.156 10 false *e
*A RH *B LH
*C Front - -
*b Imaginary Datum Line *c Vehicle Dimensions
*d Heavy Duty *e Light Duty
*f mm
(in.)
- -