2014-2016 Land Cruiser Service Manual
1GR-FE · 1UR-FE · 1VD-FTV · 3UR-FE
Trouble codes (3906)
- P0010Open or short in the camshaft timing oil control valve (for intake side of bank 1) circuit (1 trip detection...
- P0010Open or short in the camshaft timing oil control valve (for intake side of bank 1) circuit (1 trip detection...
- P0010Open or short in the camshaft timing oil control valve (for intake side of bank 1) circuit (1 trip detection...
- P0011Valve timing cannot be adjusted when in the advance range (1 trip detection logic).
- P0011Valve timing cannot be adjusted when in the advance range (1 trip detection logic).
- P0012Valve timing cannot be adjusted when in the retard range (2 trip detection logic).
- P0012Valve timing cannot be adjusted when in the retard range (2 trip detection logic).
- P0013Open or short in the camshaft timing oil control valve (for exhaust side of bank 1) circuit (1 trip detection...
- P0013Open or short in the camshaft timing oil control valve (for exhaust side of bank 1) circuit (1 trip detection...
- P0013Open or short in the camshaft timing oil control valve (for exhaust side of bank 1) circuit (1 trip detection...
- P0014Exhaust valve timing is not adjusted in the advance range (2 trip detection logic).
- P0014Exhaust valve timing is not adjusted in the advance range (2 trip detection logic).
- P0015Exhaust valve timing is not adjusted in the retard range (1 trip detection logic).
- P0015Exhaust valve timing is not adjusted in the retard range (1 trip detection logic).
- P0016Deviations in the crankshaft position sensor and VVT sensor 1 (for intake camshaft) signals (2 trip detection...
- P0016Deviations in the crankshaft position sensor and VVT sensor 1 (for intake camshaft) signals (2 trip detection...
- P0017Deviations in the crankshaft position sensor and VVT sensor 1 (for exhaust camshaft) signals (2 trip...
- P0017Deviations in the crankshaft position sensor and VVT sensor 1 (for exhaust camshaft) signals (2 trip...
- P0018Deviations in the crankshaft position sensor and VVT sensor 2 (for intake camshaft) signals (2 trip detection...
- P0018Deviations in the crankshaft position sensor and VVT sensor 2 (for intake camshaft) signals (2 trip detection...
- P0019Deviations in the crankshaft position sensor and VVT sensor 2 (for exhaust camshaft) signals (2 trip...
- P0019Deviations in the crankshaft position sensor and VVT sensor 2 (for exhaust camshaft) signals (2 trip...
- P0020Open or short in the camshaft timing oil control valve (for intake side of bank 2) circuit (1 trip detection...
- P0020Open or short in the camshaft timing oil control valve (for intake side of bank 2) circuit (1 trip detection...
- P0020Open or short in the camshaft timing oil control valve (for intake side of bank 2) circuit (1 trip detection...
- P0021Valve timing cannot be adjusted when in the advance range (1 trip detection logic).
- P0021Valve timing cannot be adjusted when in the advance range (1 trip detection logic).
- P0022Valve timing cannot be adjusted when in the retard range (2 trip detection logic).
- P0022Valve timing cannot be adjusted when in the retard range (2 trip detection logic).
- P0023Open or short in the camshaft timing oil control valve (for exhaust side of bank 2) circuit (1 trip detection...
- P0023Open or short in the camshaft timing oil control valve (for exhaust side of bank 2) circuit (1 trip detection...
- P0023Open or short in the camshaft timing oil control valve (for exhaust side of bank 2) circuit (1 trip detection...
- P0024Exhaust valve timing is not adjusted in the advance range (2 trip detection logic).
- P0024Exhaust valve timing is not adjusted in the advance range (2 trip detection logic).
- P0025Exhaust valve timing is not adjusted in the retard range (1 trip detection logic).
- P0025Exhaust valve timing is not adjusted in the retard range (1 trip detection logic).
- P0031Air fuel ratio sensor heater current is below 0.8 A (1 trip detection logic).
- P0031Air fuel ratio sensor heater current is below 0.8 A (1 trip detection logic).
- P0031Air fuel ratio sensor heater current is below 0.8 A (1 trip detection logic).
- P0032Air fuel ratio sensor heater current failure (1 trip detection logic).
- P0032Air fuel ratio sensor heater current failure (1 trip detection logic).
- P0032Air fuel ratio sensor heater current failure (1 trip detection logic).
- P0037The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0037The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0037The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0038The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0038The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0038The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0051Air fuel ratio sensor heater current is below 0.8 A (1 trip detection logic).
- P0051Air fuel ratio sensor heater current is below 0.8 A (1 trip detection logic).
- P0051Air fuel ratio sensor heater current is below 0.8 A (1 trip detection logic).
- P0052Air fuel ratio sensor heater current failure (1 trip detection logic).
- P0052Air fuel ratio sensor heater current failure (1 trip detection logic).
- P0052Air fuel ratio sensor heater current failure (1 trip detection logic).
- P0057The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0057The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0057The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0058The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0058The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0058The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic)
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic)
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic)
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic)
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic)
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic)
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic)
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic)
- P0112Short in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0112Short in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0112Short in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113Open in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113Open in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113Open in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0115Open or short in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0115Open or short in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0115Open or short in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0116Either condition is met (2 trip detection logic): · When the engine is started cold and then warmed up, the...
- P0116Either condition is met (2 trip detection logic): · When the engine is started cold and then warmed up, the...
- P0117Short in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0117Short in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0117Short in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0118Open in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0118Open in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0118Open in the engine coolant temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0120Output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0120Output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0120Output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0121Difference between VTA1 and VTA2 voltages is less than 0.8 V, or more than 1.6 V for 2 seconds (1 trip...
- P0121Difference between VTA1 and VTA2 voltages is less than 0.8 V, or more than 1.6 V for 2 seconds (1 trip...
- P0121Difference between VTA1 and VTA2 voltages is less than 0.8 V, or more than 1.6 V for 2 seconds (1 trip...
- P0122Output voltage of VTA1 is 0.2 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0122Output voltage of VTA1 is 0.2 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0122Output voltage of VTA1 is 0.2 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123Output voltage of VTA1 is 4.54 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123Output voltage of VTA1 is 4.54 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123Output voltage of VTA1 is 4.54 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0136· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0136· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0136· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0136· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0137· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0137· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0137· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0137· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0138· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0138· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0138· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0138· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0156· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0156· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0156· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0156· Abnormal voltage output: During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0157· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0157· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0157· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0157· Low voltage (open): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0158· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0158· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0158· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0158· High voltage (short): During active air fuel ratio control, conditions (a) and (b) are met for a certain...
- P0171With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0171With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0171With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0172With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0172With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0172With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0174With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0174With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0174With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0175With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0175With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0175With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0220Output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0220Output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0220Output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0222Output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0222Output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0222Output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0223Output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0223Output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0223Output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions is met (2 trip...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions is met (2 trip...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions is met (2 trip...
- P0301Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0301Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0301Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0302Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0302Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0302Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0303Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0303Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0303Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0304Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0304Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0304Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0305Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0305Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0305Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0306Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0306Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0306Misfiring of a specific cylinder occurs and one of the following conditions is met (2 trip detection logic):...
- P0327Output voltage of the knock sensor is below 0.5 V (1 trip detection logic).
- P0327Output voltage of the knock sensor is below 0.5 V (1 trip detection logic).
- P0327Output voltage of the knock sensor is below 0.5 V (1 trip detection logic).
- P0328Output voltage of the knock sensor is higher than 4.5 V (1 trip detection logic).
- P0328Output voltage of the knock sensor is higher than 4.5 V (1 trip detection logic).
- P0328Output voltage of the knock sensor is higher than 4.5 V (1 trip detection logic).
- P0332Output voltage of the knock sensor is below 0.5 V (1 trip detection logic).
- P0332Output voltage of the knock sensor is below 0.5 V (1 trip detection logic).
- P0332Output voltage of the knock sensor is below 0.5 V (1 trip detection logic).
- P0333Output voltage of the knock sensor is higher than 4.5 V (1 trip detection logic).
- P0333Output voltage of the knock sensor is higher than 4.5 V (1 trip detection logic).
- P0333Output voltage of the knock sensor is higher than 4.5 V (1 trip detection logic).
- P0335Either condition is met: · No crankshaft position sensor signal is sent to the ECM while cranking (1 trip...
- P0335Either condition is met: · No crankshaft position sensor signal is sent to the ECM while cranking (1 trip...
- P0335Either condition is met: · No crankshaft position sensor signal is sent to the ECM while cranking (1 trip...
- P0339Under conditions (a), (b) and (c), no crankshaft position sensor signal is sent to the ECM for 0.05 seconds...
- P0339Under conditions (a), (b) and (c), no crankshaft position sensor signal is sent to the ECM for 0.05 seconds...
- P0339Under conditions (a), (b) and (c), no crankshaft position sensor signal is sent to the ECM for 0.05 seconds...
- P0340Either condition is met: · No VVT sensor signal is sent to the ECM while cranking (2 trip detection logic). ·...
- P0340Either condition is met: · No VVT sensor signal is sent to the ECM while cranking (2 trip detection logic). ·...
- P0340Either condition is met: · No VVT sensor signal is sent to the ECM while cranking (2 trip detection logic). ·...
- P0342Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0342Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0342Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0343Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0343Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0343Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0345There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0345There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0345There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0347Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0347Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0347Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0348Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0348Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0348Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0351No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0351No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0351No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0352No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0352No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0352No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0353No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0353No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0353No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0354No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0354No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0354No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0355No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0355No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0355No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0356No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0356No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0356No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0365There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0365There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0365There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0367Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0367Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0367Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0368Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0368Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0368Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0390There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0390There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0390There is no VVT sensor signal despite the crankshaft position sensor input being normal at an engine speed of...
- P0392Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0392Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0392Output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0393Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0393Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0393Output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0416Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0416Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0416Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0416Open or short in the air injection VSV relay (AI-VSV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI-VSV) circuit for 3 seconds (1 trip detection logic).
- P0418All conditions are met for 3 seconds or more while idling immediately after the engine is started (2 trip...
- P0418All conditions are met for 3 seconds or more while idling immediately after the engine is started (2 trip...
- P0420OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0420OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0420OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0430OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0430OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0430OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0500While the vehicle is being driven, no vehicle speed signal is transmitted to the ECM (2 trip detection logic).
- P0500While the vehicle is being driven, no vehicle speed signal is transmitted to the ECM (2 trip detection logic).
- P0500While the vehicle is being driven, no vehicle speed signal is transmitted to the ECM (2 trip detection logic).
- P0504Conditions (a) and (b) continue for 0.5 seconds or more (1 trip detection logic): (a) Ignition switch is ON...
- P0504Conditions (a) and (b) continue for 0.5 seconds or more (1 trip detection logic): (a) Ignition switch is ON...
- P0504Conditions (a) and (b) continue for 0.5 seconds or more (1 trip detection logic): (a) Ignition switch is ON...
- P0504Conditions (a), (b) and (c) are met for 0.5 seconds or more (1 trip detection logic): (a) Ignition switch is...
- P0550Power steering oil pressure sensor voltage is below 0.28 V, or higher than 4.9 V for 0.5 seconds while the...
- P0550Power steering oil pressure sensor voltage is below 0.28 V, or higher than 4.9 V for 0.5 seconds while the...
- P0552Power steering oil pressure sensor voltage is below 0.28 V for 0.5 seconds while the engine is running (1...
- P0552Power steering oil pressure sensor voltage is below 0.28 V for 0.5 seconds while the engine is running (1...
- P0553Power steering oil pressure sensor voltage is higher than 4.9 V for 0.5 seconds while the engine is running...
- P0553Power steering oil pressure sensor voltage is higher than 4.9 V for 0.5 seconds while the engine is running...
- P0560Open in the ECM backup power source circuit (1 trip detection logic).
- P0560Open in the ECM backup power source circuit (1 trip detection logic).
- P0560Open in the ECM backup power source circuit (1 trip detection logic).
- P0560Open in the ECM backup power source circuit (1 trip detection logic).
- P0604There is an ECM internal error (1 trip detection logic).
- P0604There is an ECM internal error (1 trip detection logic).
- P0606Either condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P0606Either condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P060AThere is an ECM sub CPU error (1 trip detection logic).
- P060AThere is an ECM sub CPU error (1 trip detection logic).
- P060BThere is an ECM main CPU communication error (1 trip detection logic).
- P060BThere is an ECM main CPU communication error (1 trip detection logic).
- P060DThere is an ECM main CPU error (1 trip detection logic).
- P060DThere is an ECM main CPU error (1 trip detection logic).
- P060EThere is an ECM main CPU error (1 trip detection logic).
- P060EThere is an ECM main CPU error (1 trip detection logic).
- P0617When conditions (a), (b) and (c) are met, a positive (+B) battery voltage of 10.5 V or higher is applied to...
- P0617When conditions (a), (b) and (c) are met, a positive (+B) battery voltage of 10.5 V or higher is applied to...
- P0617When conditions (a), (b) and (c) are met, a positive (+B) battery voltage of 10.5 V or higher is applied to...
- P0630Either of the following conditions is met (1 trip detection logic): · The VIN or frame number is not stored...
- P0657There is a throttle actuator power supply error (1 trip detection logic).
- P0657There is a throttle actuator power supply error (1 trip detection logic).
- P0724Stop light switch remains on even when the vehicle is driven in a GO (30 km/h (18.65 mph) or more) and STOP...
- P0724The stop light switch assembly remains on even when the vehicle repeats 5 cycles of STOP (less than 3 km/h...
- P0724The stop light switch assembly remains on even when the vehicle repeats 5 cycles of STOP (less than 3 km/h...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P1603After monitoring for startability problems (P1604) finishes and 2 seconds or more elapse after starting the...
- P1603After monitoring for startability problems (P1604) finishes and 2 seconds or more elapse after starting the...
- P1603After monitoring for startability problems (P1604) finishes and 5 seconds or more elapse after starting the...
- P1604Either condition is met: · The engine speed is less than 500 rpm with the STA signal on for a certain amount...
- P1604Either condition is met: · The engine speed is less than 500 rpm with the STA signal on for a certain amount...
- P1604Either condition is met: · The engine speed is less than 500 rpm with the STA signal on for a certain amount...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1607An ECM CPU is malfunctioning (1 trip detection logic).
- P1607An ECM CPU is malfunctioning (1 trip detection logic).
- P1613Either condition (1) or (2) is met: (1) All conditions are met for 3 seconds or more (1 trip detection...
- P1613Either condition (1) or (2) is met: (1) All conditions are met for 3 seconds or more (1 trip detection...
- P1613Either condition (1) or (2) is met: (1) All conditions are met for 3 seconds or more (1 trip detection...
- P2102Conditions (a) and (b) are met for 2.0 seconds (1 trip detection logic): (a) Throttle actuator duty ratio is...
- P2102Conditions (a) and (b) are met for 2.0 seconds (1 trip detection logic): (a) Throttle actuator duty ratio is...
- P2103Either condition is met (1 trip detection logic): · There is a hybrid IC diagnosis signal failure. · There is...
- P2103Either condition is met (1 trip detection logic): · There is a hybrid IC diagnosis signal failure. · There is...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2111Throttle actuator does not close even when the ECM commands it to close (1 trip detection logic).
- P2111Throttle actuator does not close even when the ECM commands it to close (1 trip detection logic).
- P2112Throttle actuator does not open even when the ECM commands it to open (1 trip detection logic).
- P2112Throttle actuator does not open even when the ECM commands it to open (1 trip detection logic).
- P2118Open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2118Open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2118Open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2119Throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection logic).
- P2119Throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection logic).
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2121Either conditions (1) or (2) met for 0.5 seconds (1 trip detection logic): (1) Difference between VPA and...
- P2121Either conditions (1) or (2) met for 0.5 seconds (1 trip detection logic): (1) Difference between VPA and...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2128Conditions (a) and (b) are met for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or higher....
- P2128Conditions (a) and (b) are met for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or higher....
- P2128Conditions (a) and (b) are met for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or higher....
- P2135Either condition is met (1 trip detection logic): (a) Difference between the output voltages of VTA1 and VTA2...
- P2135Either condition is met (1 trip detection logic): (a) Difference between the output voltages of VTA1 and VTA2...
- P2135Either condition is met (1 trip detection logic): (a) Difference between the output voltages of VTA1 and VTA2...
- P2138Condition (a) or (b) is met for 2.0 seconds or more (1 trip detection logic): (a) Difference between VPA and...
- P2138Condition (a) or (b) is met for 2.0 seconds or more (1 trip detection logic): (a) Difference between VPA and...
- P2138Condition (a) or (b) is met for 2.0 seconds or more (1 trip detection logic): (a) Difference between VPA and...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2237Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2237Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2237Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2238· Case 1: Condition (a) or (b) is met for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2238· Case 1: Condition (a) or (b) is met for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2238· Case 1: Condition (a) or (b) is met for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2239AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2239AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2239AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2240Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2240Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2240Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2241· Case 1: Condition (a) or (b) is met for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2241· Case 1: Condition (a) or (b) is met for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2241· Case 1: Condition (a) or (b) is met for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2242AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2242AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2242AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2252AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2252AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2252AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2253AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2253AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2253AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2255AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2255AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2255AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2256AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2256AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2256AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2431Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2431Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2431Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2432While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2432While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2432While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2433While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2433While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2433While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2436Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2436Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2436Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2437While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2437While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2437While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2438While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2438While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2438While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2440The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2440The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2440The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2440The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2441The pressure sensor detects no pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2442The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2442The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2442The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2442The pressure sensor detects a pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2443The pressure sensor detects no pulsation in the exhaust gas despite the ECM commanding the emission control...
- P2444Secondary air pressure is higher than 3 kPa (23 mmHg) despite the ECM commanding the air pump to turn off (2...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2447When secondary air injection is on, the amount of air from the air pump is below the threshold (2 trip...
- P2610There is an ECM internal malfunction (2 trip detection logic).
- P2610There is an ECM internal malfunction (2 trip detection logic).
- P2A00The calculated value for the air fuel ratio sensor response rate deterioration level is less than the...
- P2A00The calculated value for the air fuel ratio sensor response rate deterioration level is less than the...
- P2A00The calculated value for the air fuel ratio sensor response rate deterioration level is less than the...
- P2A03The calculated value for the air fuel ratio sensor response rate deterioration level is less than the...
- P2A03The calculated value for the air fuel ratio sensor response rate deterioration level is less than the...
- P2A03The calculated value for the air fuel ratio sensor response rate deterioration level is less than the...
- P0010Open or short in the camshaft timing oil control valve for intake side (for Bank 1) circuit (1 trip detection...
- P0010Open or short in the camshaft timing oil control valve for intake side (for Bank 1) circuit (1 trip detection...
- P0011Intake valve timing is stuck at a certain value when in the advance range (1 trip detection logic).
- P0011Intake valve timing is stuck at a certain value when in the advance range (1 trip detection logic).
- P0012Intake valve timing is stuck at a certain value when in the retard range (2 trip detection logic).
- P0012Intake valve timing is stuck at a certain value when in the retard range (2 trip detection logic).
- P0013Open or short in the camshaft timing oil control valve for exhaust side (for Bank 1) circuit (1 trip...
- P0013Open or short in the camshaft timing oil control valve for exhaust side (for Bank 1) circuit (1 trip...
- P0014Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
- P0014Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
- P0015Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
- P0015Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
- P0016Deviation in the crankshaft position sensor signal and VVT sensor (for Intake Side Bank 1) signal (2 trip...
- P0016Deviation in the crankshaft position sensor signal and VVT sensor (for Intake Side Bank 1) signal (2 trip...
- P0017Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust Side Bank 1) signal (2 trip...
- P0017Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust Side Bank 1) signal (2 trip...
- P0018Deviation in the crankshaft position sensor signal and VVT sensor (for Intake Side Bank 2) signal (2 trip...
- P0018Deviation in the crankshaft position sensor signal and VVT sensor (for Intake Side Bank 2) signal (2 trip...
- P0019Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust Side Bank 2) signal (2 trip...
- P0019Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust Side Bank 2) signal (2 trip...
- P0020Open or short in the camshaft timing oil control valve for intake side (for Bank 2) circuit (1 trip detection...
- P0020Open or short in the camshaft timing oil control valve for intake side (for Bank 2) circuit (1 trip detection...
- P0021Intake valve timing is stuck at a certain value when in the advance range (1 trip detection logic).
- P0021Intake valve timing is stuck at a certain value when in the advance range (1 trip detection logic).
- P0022Intake valve timing is stuck at a certain value when in the retard range (2 trip detection logic).
- P0022Intake valve timing is stuck at a certain value when in the retard range (2 trip detection logic).
- P0023Open or short in the camshaft timing oil control valve for exhaust side (for Bank 2) circuit (1 trip...
- P0023Open or short in the camshaft timing oil control valve for exhaust side (for Bank 2) circuit (1 trip...
- P0024Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
- P0024Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
- P0025Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
- P0025Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
- P0031Air fuel ratio sensor heater current is below 0.8 A, even when the air fuel ratio sensor heater duty cycle is...
- P0031Air fuel ratio sensor heater current is below 0.8 A, even when the air fuel ratio sensor heater duty cycle is...
- P0032Air fuel ratio sensor heater current reaches the high limit (Hybrid IC high current limiter port "Fail") (1...
- P0032Air fuel ratio sensor heater current reaches the high limit (Hybrid IC high current limiter port "Fail") (1...
- P0037The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0037The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0038The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0038The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0051Air fuel ratio sensor heater current is below 0.8 A, even when the air fuel ratio sensor heater duty cycle is...
- P0051Air fuel ratio sensor heater current is below 0.8 A, even when the air fuel ratio sensor heater duty cycle is...
- P0052Air fuel ratio sensor heater current reaches the high limit (Hybrid IC high current limiter port "Fail") (1...
- P0052Air fuel ratio sensor heater current reaches the high limit (Hybrid IC high current limiter port "Fail") (1...
- P0057The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0057The heater current is below the specified value while the heater is operating (1 trip detection logic).
- P0058The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0058The heater current is higher than the specified value while the heater is operating (1 trip detection logic).
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0102Mass air flow meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0103Mass air flow meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0112Short in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0112Short in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113Open in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113Open in the intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic).
- P0115Open or short in the engine coolant temperature sensor circuit for 0.5 seconds (Engine coolant temperature...
- P0115Open or short in the engine coolant temperature sensor circuit for 0.5 seconds (Engine coolant temperature...
- P0116Either condition is met (2 trip detection logic): · When the engine is started cold and then warmed up, the...
- P0116Either condition is met (2 trip detection logic): · When the engine is started cold and then warmed up, the...
- P0117Short in the engine coolant temperature sensor circuit for 0.5 seconds (Engine coolant temperature sensor...
- P0117Short in the engine coolant temperature sensor circuit for 0.5 seconds (Engine coolant temperature sensor...
- P0118Open in the engine coolant temperature sensor circuit for 0.5 seconds (Engine coolant temperature sensor...
- P0118Open in the engine coolant temperature sensor circuit for 0.5 seconds (Engine coolant temperature sensor...
- P0120Output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0120Output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0121Difference between VTA1 and VTA2 voltages is less than 0.8 V, or more than 1.6 V for 2 seconds (1 trip...
- P0121Difference between VTA1 and VTA2 voltages is less than 0.8 V, or more than 1.6 V for 2 seconds (1 trip...
- P0122Output voltage of VTA1 0.2 V or less for 2 seconds when accelerator pedal depressed (1 trip detection logic)
- P0122Output voltage of VTA1 0.2 V or less for 2 seconds when accelerator pedal depressed (1 trip detection logic)
- P0123Output voltage of VTA1 is 4.54 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123Output voltage of VTA1 is 4.54 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0136Abnormal voltage output: During active air-fuel ratio control, the following conditions (a) and (b) are met...
- P0136Abnormal voltage output: During active air-fuel ratio control, the following conditions (a) and (b) are met...
- P0136Abnormal voltage output: During active air-fuel ratio control, the following conditions (a) and (b) are met...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0138High voltage (short): During active air-fuel ratio control, the following conditions (a) and (b) are met for...
- P0138High voltage (short): During active air-fuel ratio control, the following conditions (a) and (b) are met for...
- P0138High voltage (short): During active air-fuel ratio control, the following conditions (a) and (b) are met for...
- P0156Abnormal voltage output: During active air-fuel ratio control, the following conditions (a) and (b) are met...
- P0156Abnormal voltage output: During active air-fuel ratio control, the following conditions (a) and (b) are met...
- P0156Abnormal voltage output: During active air-fuel ratio control, the following conditions (a) and (b) are met...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0158High voltage (short): During active air-fuel ratio control, the following conditions (a) and (b) are met for...
- P0158High voltage (short): During active air-fuel ratio control, the following conditions (a) and (b) are met for...
- P0158High voltage (short): During active air-fuel ratio control, the following conditions (a) and (b) are met for...
- P0171With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0171With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0172With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0172With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0174With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0174With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the lean...
- P0175With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0175With a warm engine and stable air-fuel ratio feedback, the fuel trim is considerably in error to the rich...
- P0220Output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0220Output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0222Output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0222Output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0223Output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0223Output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions below is detected (2...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions below is detected (2...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions below is detected (2...
- P0301Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0301Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0301Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0302Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0302Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0302Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0303Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0303Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0303Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0304Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0304Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0304Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0305Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0305Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0305Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0306Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0306Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0306Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0307Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0307Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0307Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0308Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0308Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0308Misfiring of specific cylinder occurs and one of the following conditions below is detected (2 trip detection...
- P0327Output voltage of the knock sensor (for Bank 1 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0327Output voltage of the knock sensor (for Bank 1 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0328Output voltage of the knock sensor (for Bank 1 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0328Output voltage of the knock sensor (for Bank 1 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P032COutput voltage of the knock sensor (for Bank 1 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P032COutput voltage of the knock sensor (for Bank 1 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P032DOutput voltage of the knock sensor (for Bank 1 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P032DOutput voltage of the knock sensor (for Bank 1 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P0332Output voltage of the knock sensor (for Bank 2 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0332Output voltage of the knock sensor (for Bank 2 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0333Output voltage of the knock sensor (for Bank 2 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0333Output voltage of the knock sensor (for Bank 2 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0335Either condition is met: · No crankshaft position sensor signal is sent to the ECM while cranking (1 trip...
- P0335Either condition is met: · No crankshaft position sensor signal is sent to the ECM while cranking (1 trip...
- P0337Output voltage of crankshaft position sensor is 0.3 V or less for 4 seconds (1 trip detection logic).
- P0337Output voltage of crankshaft position sensor is 0.3 V or less for 4 seconds (1 trip detection logic).
- P0338Output voltage of crankshaft position sensor is 4.7 V or higher for 4 seconds (1 trip detection logic).
- P0338Output voltage of crankshaft position sensor is 4.7 V or higher for 4 seconds (1 trip detection logic).
- P0339Under conditions (a), (b) and (c), no crankshaft position sensor signal is sent to the ECM for 0.05 seconds...
- P0339Under conditions (a), (b) and (c), no crankshaft position sensor signal is sent to the ECM for 0.05 seconds...
- P033COutput voltage of the knock sensor (for Bank 2 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P033COutput voltage of the knock sensor (for Bank 2 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P033DOutput voltage of the knock sensor (for Bank 2 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P033DOutput voltage of the knock sensor (for Bank 2 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P0340No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0340No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0342Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0342Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0343Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0343Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0345No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0345No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0347Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0347Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0348Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0348Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0351No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0351No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0352No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0352No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0353No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0353No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0354No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0354No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0355No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0355No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0356No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0356No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0357No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0357No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0358No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0358No IGF signal is sent to the ECM while the engine is running (ECM does not receive any IGF signals despite...
- P0365No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0365No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0367Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0367Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0368Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0368Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0390No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0390No VVT sensor signal is sent to the ECM at an engine speed of 600 rpm or more (1 trip detection logic).
- P0392Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0392Output voltage of VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0393Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0393Output voltage of VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0412All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0416Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0416Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0416Open or short in the air injection VSV relay (AI-VSV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI VLV) circuit for 3 seconds (1 trip detection logic).
- P0417Open or short in the air injection VSV relay (AI-VSV) circuit for 3 seconds (1 trip detection logic).
- P0418All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0418All conditions are met for 3 seconds or more while idling immediately after the engine is started (1 trip...
- P0420OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0420OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0430OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0430OSC value is less than the standard value under active air-fuel ratio control (2 trip detection logic).
- P0443Terminal voltage of the ECM output circuit does not correspond with the drive signals sent from the ECM to...
- P0443Terminal voltage of the ECM output circuit does not correspond with the drive signals sent from the ECM to...
- P0443Terminal voltage of the ECM output circuit does not correspond with the drive signals sent from the ECM to...
- P0500While the vehicle is being driven, no vehicle speed signal is transmitted to the ECM (2 trip detection logic).
- P0500While the vehicle is being driven, no vehicle speed signal is transmitted to the ECM (2 trip detection logic).
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) Engine switch is...
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) The engine switch...
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) The engine switch...
- P0505Idling speed continues to vary greatly from the target idling speed (2 trip detection logic).
- P0550Power steering oil pressure switch voltage is below 0.28 V, or higher than 4.9 V for 0.5 seconds while the...
- P0550Power steering oil pressure switch voltage is below 0.28 V, or higher than 4.9 V for 0.5 seconds while the...
- P0552Power steering oil pressure switch voltage is below 0.28 V for 0.5 seconds while the engine is running (1...
- P0552Power steering oil pressure switch voltage is below 0.28 V for 0.5 seconds while the engine is running (1...
- P0553Power steering oil pressure switch voltage is higher than 4.9 V for 0.5 seconds while the engine is running...
- P0553Power steering oil pressure switch voltage is higher than 4.9 V for 0.5 seconds while the engine is running...
- P0560Open in the ECM backup power source circuit (1 trip detection logic).
- P0560Open in the ECM backup power source circuit (1 trip detection logic).
- P0604ECM RAM errors (Main CPU and sub CPU mirroring failure) (1 trip detection logic).
- P0604ECM RAM errors (Main CPU and sub CPU mirroring failure) (1 trip detection logic).
- P0606Either condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P0606Either condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P060AA CPU reset is performed after one of the following conditions is met (1 trip detection logic): · There is an...
- P060AA CPU reset is performed after one of the following conditions is met (1 trip detection logic): · There is an...
- P060BThere is an ECM main CPU communication error (1 trip detection logic).
- P060BThere is an ECM main CPU communication error (1 trip detection logic).
- P060DEither condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P060DEither condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P060EEither condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P060EEither condition is met (1 trip detection logic): · There is an ECM main CPU error. · There is an ECM sub CPU...
- P0617Conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied to...
- P0617Conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied to...
- P0630When either of the following conditions is met (1 trip detection logic): · The VIN is not stored in the ECM....
- P0630When either of the following conditions is met (1 trip detection logic): · The VIN or frame number is not...
- P0657There is a throttle actuator power supply error (1 trip detection logic).
- P0657There is a throttle actuator power supply error (1 trip detection logic).
- P0660The following conditions are met simultaneously for 0.5 seconds or more (2 trip detection logic): 1. Voltage...
- P0660The following conditions are met simultaneously for 0.5 seconds or more (2 trip detection logic): 1. Voltage...
- P0660The following conditions are met simultaneously for 0.5 seconds or more (2 trip detection logic): 1. Voltage...
- P0724Stop light switch remains on even when the vehicle is driven in a GO (30 km/h (18.63 mph) or more) and STOP...
- P0724Stop light switch remains on even when the vehicle is driven in a GO (30 km/h (18.65 mph) or more) and STOP...
- P101DThe heater current is higher than the specified value (1 trip detection logic).
- P101DThe heater current is higher than the specified value (1 trip detection logic).
- P102DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P103DThe heater current is higher than the specified value (1 trip detection logic).
- P103DThe heater current is higher than the specified value (1 trip detection logic).
- P105DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P1340No camshaft position sensor signal is sent to the ECM during cranking (2 trip detection logic).
- P1340No camshaft position sensor signal is sent to the ECM during cranking (2 trip detection logic).
- P1342Output voltage of the camshaft position sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P1342Output voltage of the camshaft position sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P1343Output voltage of the camshaft position sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P1343Output voltage of the camshaft position sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144COpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P144DOpen or short in the air pump heater relay circuit for 5 seconds (1 trip detection logic).
- P1603After monitoring for startability problems (P1604) finishes and 5 seconds or more elapse after starting the...
- P1603After monitoring for startability problems (P1604) finishes and 5 seconds or more elapse after starting the...
- P1604Either condition is met: · The engine speed is less than 500 rpm with the STA signal on for a certain amount...
- P1604Either condition is met: · The engine speed is less than 500 rpm with the STA signal on for a certain amount...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1607ECM CPUs malfunction (1 trip detection logic).
- P1607ECM CPUs malfunction (1 trip detection logic).
- P1613Either condition (1) or (2) is met: (1) All conditions are met for 3 seconds or more (1 trip detection...
- P1613Either condition (1) or (2) is met: (1) All conditions are met for 3 seconds or more (1 trip detection...
- P2102Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): (a) Throttle actuator duty ratio is...
- P2102Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): (a) Throttle actuator duty ratio is...
- P2103Either condition is met (1 trip detection logic): · There is a hybrid IC diagnosis signal failure. · There is...
- P2103Either condition is met (1 trip detection logic): · There is a hybrid IC diagnosis signal failure. · There is...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2111Throttle actuator does not close even when the ECM commands it to close (1 trip detection logic).
- P2111Throttle actuator does not close even when the ECM commands it to close (1 trip detection logic).
- P2112Throttle actuator does not open even when the ECM commands it to open (1 trip detection logic).
- P2112Throttle actuator does not open even when the ECM commands it to open (1 trip detection logic).
- P2118Open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2118Open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2119Throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection logic).
- P2119Throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection logic).
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2121Either of following conditions 1 or 2 met for 0.5 seconds (1 trip detection logic) 1. Difference between VPA...
- P2121Either of following conditions 1 or 2 met for 0.5 seconds (1 trip detection logic) 1. Difference between VPA...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2128Conditions (a) and (b) continue for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or...
- P2128Conditions (a) and (b) continue for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or...
- P2135Either condition is met (1 trip detection logic): (a) Difference between the output voltages of VTA1 and VTA2...
- P2135Either condition is met (1 trip detection logic): (a) Difference between the output voltages of VTA1 and VTA2...
- P2138Condition (a) or (b) continues for 2.0 seconds or more (1 trip detection logic): (a) Difference between VPA...
- P2138Condition (a) or (b) continues for 2.0 seconds or more (1 trip detection logic): (a) Difference between VPA...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2195Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2196Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2197Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2198Conditions (a) and (b) continue for 5 seconds or more (2 trip detection logic): (a) Air fuel ratio sensor...
- P2237Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2237Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2238· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2238· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2239AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2239AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2240Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2240Open in the circuit between terminals AF+ and AF- of the air fuel ratio sensor while the engine is running (2...
- P2241· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2241· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (2 trip detection logic): (a) AF+ voltage is...
- P2242AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2242AF+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2252AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2252AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2253AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2253AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2255AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2255AF- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2256AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2256AF- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2431Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2431Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2432While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2432While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2433While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2433While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2436Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2436Pressure sensor indicates a value below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip...
- P2437While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2437While the engine is running, the voltage output of the pressure sensor is below 0.5 V (1 trip detection...
- P2438While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2438While the engine is running, the voltage output of the pressure sensor is higher than 4.5 V (1 trip detection...
- P2440The air switching valve (for Bank 1) is stuck open for approximately 60 seconds after the engine is started...
- P2440The air switching valve (for Bank 1) is stuck open for approximately 60 seconds after the engine is started...
- P2440The air switching valve (for Bank 1) is stuck open for approximately 60 seconds after the engine is started...
- P2441The air switching valve (for Bank 1) is stuck closed for approximately 60 seconds after the engine is started...
- P2441The air switching valve (for Bank 1) is stuck closed for approximately 60 seconds after the engine is started...
- P2441The air switching valve (for Bank 1) is stuck closed for approximately 60 seconds after the engine is started...
- P2442The air switching valve (for Bank 2) is stuck open for approximately 60 seconds after the engine is started...
- P2442The air switching valve (for Bank 2) is stuck open for approximately 60 seconds after the engine is started...
- P2442The air switching valve (for Bank 2) is stuck open for approximately 60 seconds after the engine is started...
- P2443The air switching valve (for Bank 2) is stuck closed for approximately 60 seconds after the engine is started...
- P2443The air switching valve (for Bank 2) is stuck closed for approximately 60 seconds after the engine is started...
- P2443The air switching valve (for Bank 2) is stuck closed for approximately 60 seconds after the engine is started...
- P2444Secondary air pressure is higher than 2.5 kPa (19 mmHg) despite the ECM commanding the air pump to turn off...
- P2444Secondary air pressure is higher than 2.5 kPa (19 mmHg) despite the ECM commanding the air pump to turn off...
- P2444Secondary air pressure is higher than 2.5 kPa (19 mmHg) despite the ECM commanding the air pump to turn off...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2445Secondary air pressure is below 1 kPa (8 mmHg) despite the ECM commanding the air pump to turn on (2 trip...
- P2610ECM internal malfunction
- P2610ECM internal malfunction
- P2A00Calculated value of the air fuel ratio sensor response rate deterioration level is less than the threshold (2...
- P2A00Calculated value of the air fuel ratio sensor response rate deterioration level is less than the threshold (2...
- P2A03Calculated value of the air fuel ratio sensor response rate deterioration level is less than the threshold (2...
- P2A03Calculated value of the air fuel ratio sensor response rate deterioration level is less than the threshold (2...
- P0010An open or short in the Camshaft Oil Control Valve (OCV) for intake side (for Bank 1) circuit (1 trip...
- P0011The intake valve timing is not adjusted in the valve timing advance range (1 trip detection logic).
- P0012The intake valve timing is not adjusted in the valve timing retard range (2 trip detection logic).
- P0013An open or short in the Camshaft Oil Control Valve (OCV) for exhaust side (for Bank 1) circuit (1 trip...
- P0014The exhaust valve timing is not adjusted in the valve timing advance range (2 trip detection logic).
- P0015The exhaust valve timing is not adjusted in the valve timing retard range (1 trip detection logic).
- P0016Deviation in the crankshaft position sensor signal and VVT sensor (for Intake side of Bank 1) signal (2 trip...
- P0017Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust side of Bank 1) signal (2 trip...
- P0018Deviation in the crankshaft position sensor signal and VVT sensor (for Intake side of Bank 2) signal (2 trip...
- P0019Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust side of Bank 2) signal (2 trip...
- P0020An open or short in the OCV for intake side (for Bank 2) circuit (1 trip detection logic).
- P0021The intake valve timing is not adjusted in the valve timing advance range (1 trip detection logic).
- P0022The intake valve timing is not adjusted in the valve timing retard range (2 trip detection logic).
- P0023An open or short in the OCV for exhaust side (for Bank 2) circuit (1 trip detection logic).
- P0024The exhaust valve timing is not adjusted in the valve timing advance range (2 trip detection logic).
- P0025The exhaust valve timing is not adjusted in the valve timing retard range (1 trip detection logic).
- P0031The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0032An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0037The Heated Oxygen (HO2) sensor heater current is below 0.3 A (1 trip detection logic)
- P0038The Heated Oxygen (HO2) sensor heater current is higher than 2 A (1 trip detection logic)
- P0051The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0052An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0057The Heated Oxygen (HO2) sensor heater current is below 0.3 A (1 trip detection logic)
- P0058The Heated Oxygen (HO2) sensor heater current is higher than 2 A (1 trip detection logic)
- P0102The Mass Air Flow (MAF) meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0103The MAF meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0112A short in the IAT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113An open in the IAT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0115An open or short in the Engine Coolant Temperature (ECT) sensor circuit for 0.5 seconds (1 trip detection...
- P0116The Engine Coolant Temperature (ECT) is between 35°C and 60°C (95°F and 140°F) when the engine is started,...
- P0117A short in the ECT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0118An open in the ECT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0120The output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0121The difference between the VTA1 and VTA2 voltages is below 0.8 V, or higher than 1.6 V for 2 seconds (1 trip...
- P0122The output voltage of VTA1 is 0.2 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123The output voltage of VTA1 is 4.535 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0220The output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0222The output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0223The output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions below is detected (2...
- P0301Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0302Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0303Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0304Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0305Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0306Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0307Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0308Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0327The output voltage of the knock sensor (for Bank 1 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0328The output voltage of the knock sensor (for Bank 1 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P032CThe output voltage of the knock sensor (for Bank 1 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P032DThe output voltage of the knock sensor (for Bank 1 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P0332The output voltage of the knock sensor (for Bank 2 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0333The output voltage of the knock sensor (for Bank 2 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0335· No Crankshaft Position (CKP) sensor signal is sent to the ECM while cranking (1 trip detection logic). · No...
- P0337The output voltage of the CKP sensor is 0.3 V or less for 4 seconds (1 trip detection logic).
- P0338The output voltage of the CKP sensor is 4.7 V or higher for 4 seconds (1 trip detection logic).
- P0339Under conditions (a), (b) and (c), no CKP sensor signal is sent to the ECM for 0.05 seconds or more (1 trip...
- P033CThe output voltage of the knock sensor (for Bank 2 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P033DThe output voltage of the knock sensor (for Bank 2 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P0340When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0342The output voltage of the VVT sensor (for intake side of Bank 1, 2) is below 0.3 V for 4 seconds (1 trip...
- P0343The output voltage of the VVT sensor (for intake side of Bank 1, 2) is higher than 4.7 V for 4 seconds (1...
- P0345When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0347The output voltage of the VVT sensor (for intake side of Bank 1, 2) is below 0.3 V for 4 seconds (1 trip...
- P0348The output voltage of the VVT sensor (for intake side of Bank 1, 2) is higher than 4.7 V for 4 seconds (1...
- P0351No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0352No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0353No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0354No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0355No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0356No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0357No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0358No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0365When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0367The output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0368The output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0390When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0392The output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0393The output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0412After a cold engine start, all of the following conditions are met (1 trip detection logic): (a) The...
- P0415After a cold engine start, all of the following conditions are met (1 trip detection logic): (a) The...
- P0418After a cold engine start, all of the following conditions are met (2 trip detection logic): (a) Secondary...
- P0419After a cold engine start, all of the following conditions are met (2 trip detection logic): (a) Secondary...
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0500While the vehicle is being driven, no vehicle speed sensor signal is transmitted to the ECM (2 trip detection...
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) The engine switch...
- P0550Power steering oil pressure sensor voltage less than 0.28 V, or more than 4.9 V for 0.5 seconds while engine...
- P0552Power steering oil pressure sensor voltage less than 0.28 V for 0.5 seconds while engine running. (1 trip...
- P0553Power steering oil pressure sensor voltage more than 4.9 V for 0.5 seconds while engine running. (1 trip...
- P0560An open in the ECM back up power source circuit (1 trip detection logic).
- P0604ECM RAM errors.
- P0606When either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P060AWhen one of the following conditions is met: · An ECM main CPU error. · An ECM sub CPU error. · An electronic...
- P060BAn ECM main CPU communication error.
- P060DWhen either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P060EWhen either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P0617When conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied...
- P0630Either of the following conditions is met (1 trip detection logic): · The VIN or frame number is not stored...
- P0657A throttle actuator power supply error.
- P0660Conditions (a) and (b) are met for 0.5 sec. or more (2 trip detection logic): (a) The voltage of terminal...
- P07051. Any 2 or more of the following signals are ON simultaneously: - NSW input signal is ON - D input signal is...
- P0724Stop light switch remains on even when the vehicle is driven in a GO (30 km/h (18.65 mph) or more) and STOP...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating. (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating. (1 trip detection...
- P1340No camshaft position sensor signal is sent to the ECM during cranking (2 trip detection logic).
- P1342The output voltage of the camshaft position sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P1343The output voltage of the camshaft position sensor is higher than 4.7 V for 4 seconds (1 trip detection...
- P1603After monitoring for startability problems (P1604) finishes and 2 seconds or more elapse after starting the...
- P1604Either condition is met: · The engine speed is below 500 rpm with the STA signal on for a certain amount of...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1607The ECM CPUs malfunction.
- P1613Either of the following conditions (1) or (2) is met: (1) All of the following conditions are met (1 trip...
- P1614Either of the following conditions (1) or (2) is met: (1) All of the following conditions are met (1 trip...
- P2102Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): (a) The throttle actuator duty...
- P2103Either of the following conditions is met (1 trip detection logic): · A hybrid IC diagnosis signal failure. ·...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2111The throttle actuator does not close when signaled by the ECM (1 trip detection logic).
- P2112The throttle actuator does not open when signaled by the ECM (1 trip detection logic).
- P2118An open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2119The throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection...
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2121Either of following conditions 1 or 2 met for 0.5 seconds (1 trip detection logic) 1. Difference between VPA...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2128Conditions (a) and (b) continue for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or...
- P2135Either condition (a) or (b) is met (1 trip detection logic): (a) The difference between the output voltages...
- P2138Condition (a) or (b) continues for 2.0 seconds or more (1 trip detection logic): (a) The difference between...
- P2237An open in the circuit between terminals A1A+ and A1A-/A2A+ and A2A- of the A/F sensor while the engine is...
- P2238· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (1 trip detection logic): (a) The A1A+/A2A+...
- P2239The A1A+/A2A+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2240An open in the circuit between terminals A1A+ and A1A-/A2A+ and A2A- of the A/F sensor while the engine is...
- P2241· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (1 trip detection logic): (a) The A1A+/A2A+...
- P2242The A1A+/A2A+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2252The A1A-/A2A- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2253The A1A-/A2A- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2255The A1A-/A2A- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2256The A1A-/A2A- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2431The pressure sensor indicates below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip detection...
- P2432While the engine is running, the voltage output of the pressure sensor remains below 0.5 V (1 trip detection...
- P2433While the engine is running, the voltage output of the pressure sensor remains higher than 4.5 V (1 trip...
- P2436The pressure sensor indicates below 45.6 kPa (342 mmHg), or higher than 135 kPa (1013 mmHg) (2 trip detection...
- P2437While the engine is running, the voltage output of the pressure sensor remains below 0.5 V (1 trip detection...
- P2438While the engine is running, the voltage output of the pressure sensor remains higher than 4.5 V (1 trip...
- P2440The pressure sensor detects pulsation of the exhaust gas despite the ECM commanding the Air Switching Valve...
- P2441The pressure sensor detects no pulsation of the exhaust gas despite the ECM commanding the Air Switching...
- P2442The pressure sensor detects pulsation of the exhaust gas despite the ECM commanding the Air Switching Valve...
- P2443The pressure sensor detects no pulsation of the exhaust gas despite the ECM commanding the Air Switching...
- P2444The secondary air pressure is 2.4 kPa (18 mmHg) or more despite the ECM commanding the air pump to turn off...
- P2445The secondary air pressure is less than 2.4 kPa (18 mmHg) despite the ECM commanding the air pump to turn on...
- P2446The secondary air pressure is 2.4 kPa (18 mmHg) or more despite the ECM commanding the air pump to turn off...
- P2447The secondary air pressure is less than 2.4 kPa (18 mmHg) despite the ECM commanding the air pump to turn on...
- U0101No communication from TCM continues
- P0010An open or short in the Camshaft Oil Control Valve (OCV) for intake side (for Bank 1) circuit (1 trip...
- P0010An open or short in the Camshaft Oil Control Valve (OCV) for intake side (for Bank 1) circuit (1 trip...
- P0011The intake valve timing is not adjusted in the valve timing advance range (1 trip detection logic).
- P0011The intake valve timing is not adjusted in the valve timing advance range (1 trip detection logic).
- P0012The intake valve timing is not adjusted in the valve timing retard range (2 trip detection logic).
- P0012The intake valve timing is not adjusted in the valve timing retard range (2 trip detection logic).
- P0013An open or short in the Camshaft Oil Control Valve (OCV) for exhaust side (for Bank 1) circuit (1 trip...
- P0013An open or short in the Camshaft Oil Control Valve (OCV) for exhaust side (for Bank 1) circuit (1 trip...
- P0014The exhaust valve timing is not adjusted in the valve timing advance range (2 trip detection logic).
- P0014The exhaust valve timing is not adjusted in the valve timing advance range (2 trip detection logic).
- P0015The exhaust valve timing is not adjusted in the valve timing retard range (1 trip detection logic).
- P0015The exhaust valve timing is not adjusted in the valve timing retard range (1 trip detection logic).
- P0016Deviation in the crankshaft position sensor signal and VVT sensor (for Intake side of Bank 1) signal (2 trip...
- P0016Deviation in the crankshaft position sensor signal and VVT sensor (for Intake side of Bank 1) signal (2 trip...
- P0017Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust side of Bank 1) signal (2 trip...
- P0017Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust side of Bank 1) signal (2 trip...
- P0018Deviation in the crankshaft position sensor signal and VVT sensor (for Intake side of Bank 2) signal (2 trip...
- P0018Deviation in the crankshaft position sensor signal and VVT sensor (for Intake side of Bank 2) signal (2 trip...
- P0019Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust side of Bank 2) signal (2 trip...
- P0019Deviation in the crankshaft position sensor signal and VVT sensor (for Exhaust side of Bank 2) signal (2 trip...
- P0020An open or short in the OCV for intake side (for Bank 2) circuit (1 trip detection logic).
- P0020An open or short in the OCV for intake side (for Bank 2) circuit (1 trip detection logic).
- P0021The intake valve timing is not adjusted in the valve timing advance range (1 trip detection logic).
- P0021The intake valve timing is not adjusted in the valve timing advance range (1 trip detection logic).
- P0022The intake valve timing is not adjusted in the valve timing retard range (2 trip detection logic).
- P0022The intake valve timing is not adjusted in the valve timing retard range (2 trip detection logic).
- P0023An open or short in the OCV for exhaust side (for Bank 2) circuit (1 trip detection logic).
- P0023An open or short in the OCV for exhaust side (for Bank 2) circuit (1 trip detection logic).
- P0024The exhaust valve timing is not adjusted in the valve timing advance range (2 trip detection logic).
- P0024The exhaust valve timing is not adjusted in the valve timing advance range (2 trip detection logic).
- P0025The exhaust valve timing is not adjusted in the valve timing retard range (1 trip detection logic).
- P0025The exhaust valve timing is not adjusted in the valve timing retard range (1 trip detection logic).
- P0031The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0031The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0031The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0032An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0032An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0032An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0037The Heated Oxygen (HO2) sensor heater current is below 0.3 A (1 trip detection logic)
- P0037The Heated Oxygen (HO2) sensor heater current is below 0.3 A (1 trip detection logic)
- P0038The Heated Oxygen (HO2) sensor heater current is higher than 2 A (1 trip detection logic)
- P0038The Heated Oxygen (HO2) sensor heater current is higher than 2 A (1 trip detection logic)
- P0051The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0051The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0051The Air Fuel ratio (A/F) sensor heater current is below 0.8 A (1 trip detection logic)
- P0052An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0052An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0052An Air Fuel ratio (A/F) sensor heater current failure (1 trip detection logic)
- P0057The Heated Oxygen (HO2) sensor heater current is below 0.3 A (1 trip detection logic)
- P0057The Heated Oxygen (HO2) sensor heater current is below 0.3 A (1 trip detection logic)
- P0058The Heated Oxygen (HO2) sensor heater current is higher than 2 A (1 trip detection logic)
- P0058The Heated Oxygen (HO2) sensor heater current is higher than 2 A (1 trip detection logic)
- P0102The Mass Air Flow (MAF) meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0102The Mass Air Flow (MAF) meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0102The Mass Air Flow (MAF) meter voltage is below 0.2 V for 3 seconds (1 trip detection logic).
- P0103The MAF meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0103The MAF meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0103The MAF meter voltage is higher than 4.9 V for 3 seconds (1 trip detection logic).
- P0112A short in the IAT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0112A short in the IAT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113An open in the IAT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0113An open in the IAT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0115An open or short in the Engine Coolant Temperature (ECT) sensor circuit for 0.5 seconds (1 trip detection...
- P0115An open or short in the Engine Coolant Temperature (ECT) sensor circuit for 0.5 seconds (1 trip detection...
- P0116The Engine Coolant Temperature (ECT) is between 35°C and 60°C (95°F and 140°F) when the engine is started,...
- P0116The Engine Coolant Temperature (ECT) is between 35°C and 60°C (95°F and 140°F) when the engine is started,...
- P0117A short in the ECT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0117A short in the ECT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0118An open in the ECT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0118An open in the ECT sensor circuit for 0.5 seconds (1 trip detection logic).
- P0120The output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0120The output voltage of VTA1 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0121The difference between the VTA1 and VTA2 voltages is below 0.8 V, or higher than 1.6 V for 2 seconds (1 trip...
- P0121The difference between the VTA1 and VTA2 voltages is below 0.8 V, or higher than 1.6 V for 2 seconds (1 trip...
- P0122The output voltage of VTA1 is 0.2 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0122The output voltage of VTA1 is 0.2 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123The output voltage of VTA1 is 4.535 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0123The output voltage of VTA1 is 4.535 V or higher for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0137Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0157Low voltage (open): During active air-fuel ratio control, the following conditions (a) and (b) are met for a...
- P0220The output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0220The output voltage of VTA2 quickly fluctuates beyond the lower and upper malfunction thresholds for 2 seconds...
- P0222The output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0222The output voltage of VTA2 is 1.75 V or less for 2 seconds when the accelerator pedal is depressed (1 trip...
- P0223The output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0223The output voltage of VTA2 is 4.8 V or higher, and VTA1 is between 0.2 V and 2.02 V for 2 seconds when the...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions below is detected (2...
- P0300Simultaneous misfiring of several cylinders occurs and one of the following conditions below is detected (2...
- P0301Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0301Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0302Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0302Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0303Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0303Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0304Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0304Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0305Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0305Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0306Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0306Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0307Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0307Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0308Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0308Misfiring of a specific cylinder occurs and one of the following conditions below is detected (2 trip...
- P0327The output voltage of the knock sensor (for Bank 1 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0327The output voltage of the knock sensor (for Bank 1 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0328The output voltage of the knock sensor (for Bank 1 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0328The output voltage of the knock sensor (for Bank 1 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P032CThe output voltage of the knock sensor (for Bank 1 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P032CThe output voltage of the knock sensor (for Bank 1 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P032DThe output voltage of the knock sensor (for Bank 1 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P032DThe output voltage of the knock sensor (for Bank 1 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P0332The output voltage of the knock sensor (for Bank 2 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0332The output voltage of the knock sensor (for Bank 2 Sensor 1) is 0.5 V or less (1 trip detection logic).
- P0333The output voltage of the knock sensor (for Bank 2 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0333The output voltage of the knock sensor (for Bank 2 Sensor 1) is 4.5 V or higher (1 trip detection logic).
- P0335· No Crankshaft Position (CKP) sensor signal is sent to the ECM while cranking (1 trip detection logic). · No...
- P0335· No Crankshaft Position (CKP) sensor signal is sent to the ECM while cranking (1 trip detection logic). · No...
- P0337The output voltage of the CKP sensor is 0.3 V or less for 4 seconds (1 trip detection logic).
- P0337The output voltage of the CKP sensor is 0.3 V or less for 4 seconds (1 trip detection logic).
- P0338The output voltage of the CKP sensor is 4.7 V or higher for 4 seconds (1 trip detection logic).
- P0338The output voltage of the CKP sensor is 4.7 V or higher for 4 seconds (1 trip detection logic).
- P0339Under conditions (a), (b) and (c), no CKP sensor signal is sent to the ECM for 0.05 seconds or more (1 trip...
- P0339Under conditions (a), (b) and (c), no CKP sensor signal is sent to the ECM for 0.05 seconds or more (1 trip...
- P033CThe output voltage of the knock sensor (for Bank 2 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P033CThe output voltage of the knock sensor (for Bank 2 Sensor 2) is 0.5 V or less (1 trip detection logic).
- P033DThe output voltage of the knock sensor (for Bank 2 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P033DThe output voltage of the knock sensor (for Bank 2 Sensor 2) is 4.5 V or higher (1 trip detection logic).
- P0340When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0340When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0342The output voltage of the VVT sensor (for intake side of Bank 1, 2) is below 0.3 V for 4 seconds (1 trip...
- P0342The output voltage of the VVT sensor (for intake side of Bank 1, 2) is below 0.3 V for 4 seconds (1 trip...
- P0343The output voltage of the VVT sensor (for intake side of Bank 1, 2) is higher than 4.7 V for 4 seconds (1...
- P0343The output voltage of the VVT sensor (for intake side of Bank 1, 2) is higher than 4.7 V for 4 seconds (1...
- P0345When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0345When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0347The output voltage of the VVT sensor (for intake side of Bank 1, 2) is below 0.3 V for 4 seconds (1 trip...
- P0347The output voltage of the VVT sensor (for intake side of Bank 1, 2) is below 0.3 V for 4 seconds (1 trip...
- P0348The output voltage of the VVT sensor (for intake side of Bank 1, 2) is higher than 4.7 V for 4 seconds (1...
- P0348The output voltage of the VVT sensor (for intake side of Bank 1, 2) is higher than 4.7 V for 4 seconds (1...
- P0351No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0351No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0352No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0352No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0353No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0353No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0354No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0354No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0355No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0355No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0356No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0356No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0357No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0357No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0358No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0358No IGF signal is sent to the ECM while the engine is running (1 trip detection logic).
- P0365When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0365When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0367The output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0367The output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0368The output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0368The output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0390When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0390When either condition below is met: · The input voltage to the ECM remains at below 0.3 V or higher than 4.7...
- P0392The output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0392The output voltage of the VVT sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P0393The output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0393The output voltage of the VVT sensor is higher than 4.7 V for 4 seconds (1 trip detection logic).
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0443The terminal voltage of the ECM output circuit does not correspond with the drive signals from the ECM to the...
- P0500While the vehicle is being driven, no vehicle speed sensor signal is transmitted to the ECM (2 trip detection...
- P0500While the vehicle is being driven, no vehicle speed sensor signal is transmitted to the ECM (2 trip detection...
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) The engine switch...
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) The engine switch...
- P0504Conditions (a), (b) and (c) continue for 0.5 seconds or more (1 trip detection logic): (a) The engine switch...
- P0550Power steering oil pressure sensor voltage less than 0.28 V, or more than 4.9 V for 0.5 seconds while engine...
- P0550Power steering oil pressure sensor voltage less than 0.28 V, or more than 4.9 V for 0.5 seconds while engine...
- P0552Power steering oil pressure sensor voltage less than 0.28 V for 0.5 seconds while engine running. (1 trip...
- P0552Power steering oil pressure sensor voltage less than 0.28 V for 0.5 seconds while engine running. (1 trip...
- P0553Power steering oil pressure sensor voltage more than 4.9 V for 0.5 seconds while engine running. (1 trip...
- P0553Power steering oil pressure sensor voltage more than 4.9 V for 0.5 seconds while engine running. (1 trip...
- P0560An open in the ECM back up power source circuit (1 trip detection logic).
- P0560An open in the ECM back up power source circuit (1 trip detection logic).
- P0604ECM RAM errors.
- P0604ECM RAM errors.
- P0606When either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P0606When either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P060AWhen one of the following conditions is met: · An ECM main CPU error. · An ECM sub CPU error. · An electronic...
- P060AWhen one of the following conditions is met: · An ECM main CPU error. · An ECM sub CPU error. · An electronic...
- P060BAn ECM main CPU communication error.
- P060BAn ECM main CPU communication error.
- P060DWhen either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P060DWhen either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P060EWhen either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P060EWhen either condition below is met: · An ECM main CPU error. · An ECM sub CPU error.
- P0617When conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied...
- P0617When conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied...
- P0630Either of the following conditions is met (1 trip detection logic): · The VIN or frame number is not stored...
- P0657A throttle actuator power supply error.
- P0657A throttle actuator power supply error.
- P0660Conditions (a) and (b) are met for 0.5 sec. or more (2 trip detection logic): (a) The voltage of terminal...
- P0660Conditions (a) and (b) are met for 0.5 sec. or more (2 trip detection logic): (a) The voltage of terminal...
- P0660Conditions (a) and (b) are met for 0.5 sec. or more (2 trip detection logic): (a) The voltage of terminal...
- P07051. Any 2 or more of the following signals are ON simultaneously: - NSW input signal is ON - D input signal is...
- P07051. Any 2 or more of the following signals are ON simultaneously: - NSW input signal is ON - D input signal is...
- P0724Stop light switch remains ON even when vehicle is driven in GO (30 km/h (18.63 mph) or more) and STOP (less...
- P0724Stop light switch remains on even when the vehicle is driven in a GO (30 km/h (18.65 mph) or more) and STOP...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P101DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating. (1 trip detection...
- P102DThe heater current is higher than the specified value while the heater is not operating. (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P103DThe heater current is higher than the specified value while the heater is not operating (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating. (1 trip detection...
- P105DThe heater current is higher than the specified value while the heater is not operating. (1 trip detection...
- P1340No camshaft position sensor signal is sent to the ECM during cranking (2 trip detection logic).
- P1340No camshaft position sensor signal is sent to the ECM during cranking (2 trip detection logic).
- P1342The output voltage of the camshaft position sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P1342The output voltage of the camshaft position sensor is below 0.3 V for 4 seconds (1 trip detection logic).
- P1343The output voltage of the camshaft position sensor is higher than 4.7 V for 4 seconds (1 trip detection...
- P1343The output voltage of the camshaft position sensor is higher than 4.7 V for 4 seconds (1 trip detection...
- P1603After monitoring for startability problems (P1604) finishes and 2 seconds or more elapse after starting the...
- P1603After monitoring for startability problems (P1604) finishes and 2 seconds or more elapse after starting the...
- P1603After monitoring for startability problems (P1604) finishes and 5 seconds or more elapse after starting the...
- P1604Either condition is met: · The engine speed is below 500 rpm with the STA signal on for a certain amount of...
- P1604Either condition is met: · The engine speed is below 500 rpm with the STA signal on for a certain amount of...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1605After 5 seconds or more elapse after starting the engine, with the engine running, the engine speed drops to...
- P1607The ECM CPUs malfunction.
- P1607The ECM CPUs malfunction.
- P2102Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): (a) The throttle actuator duty...
- P2102Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): (a) The throttle actuator duty...
- P2103Either of the following conditions is met (1 trip detection logic): · A hybrid IC diagnosis signal failure. ·...
- P2103Either of the following conditions is met (1 trip detection logic): · A hybrid IC diagnosis signal failure. ·...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2109The ISC learned value is approximately 3 times larger than normal even though the actual intake air amount...
- P2111The throttle actuator does not close when signaled by the ECM (1 trip detection logic).
- P2111The throttle actuator does not close when signaled by the ECM (1 trip detection logic).
- P2112The throttle actuator does not open when signaled by the ECM (1 trip detection logic).
- P2112The throttle actuator does not open when signaled by the ECM (1 trip detection logic).
- P2118An open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2118An open in the ETCS power source (+BM) circuit (1 trip detection logic).
- P2119The throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection...
- P2119The throttle valve opening angle continues to vary greatly from the target opening angle (1 trip detection...
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2120VPA fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2121Either of following conditions 1 or 2 met for 0.5 seconds (1 trip detection logic) 1. Difference between VPA...
- P2121Either of following conditions 1 or 2 met for 0.5 seconds (1 trip detection logic) 1. Difference between VPA...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2122VPA is 0.4 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2123VPA is 4.8 V or higher for 2.0 seconds or more (1 trip detection logic).
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2125VPA2 fluctuates rapidly beyond the upper and lower malfunction thresholds for 0.5 seconds or more (1 trip...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2127VPA2 is 1.2 V or less for 0.5 seconds or more when the accelerator pedal is fully released (1 trip detection...
- P2128Conditions (a) and (b) continue for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or...
- P2128Conditions (a) and (b) continue for 2.0 seconds or more (1 trip detection logic): (a) VPA2 is 4.8 V or...
- P2135Either condition (a) or (b) is met (1 trip detection logic): (a) The difference between the output voltages...
- P2135Either condition (a) or (b) is met (1 trip detection logic): (a) The difference between the output voltages...
- P2138Condition (a) or (b) continues for 2.0 seconds or more (1 trip detection logic): (a) The difference between...
- P2138Condition (a) or (b) continues for 2.0 seconds or more (1 trip detection logic): (a) The difference between...
- P2237An open in the circuit between terminals A1A+ and A1A-/A2A+ and A2A- of the A/F sensor while the engine is...
- P2237An open in the circuit between terminals A1A+ and A1A-/A2A+ and A2A- of the A/F sensor while the engine is...
- P2238· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (1 trip detection logic): (a) The A1A+/A2A+...
- P2238· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (1 trip detection logic): (a) The A1A+/A2A+...
- P2239The A1A+/A2A+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2239The A1A+/A2A+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2240An open in the circuit between terminals A1A+ and A1A-/A2A+ and A2A- of the A/F sensor while the engine is...
- P2240An open in the circuit between terminals A1A+ and A1A-/A2A+ and A2A- of the A/F sensor while the engine is...
- P2241· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (1 trip detection logic): (a) The A1A+/A2A+...
- P2241· Case 1: Condition (a) or (b) continues for 5.0 seconds or more (1 trip detection logic): (a) The A1A+/A2A+...
- P2242The A1A+/A2A+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2242The A1A+/A2A+ voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2252The A1A-/A2A- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2252The A1A-/A2A- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2253The A1A-/A2A- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2253The A1A-/A2A- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2255The A1A-/A2A- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2255The A1A-/A2A- voltage is 0.5 V or less for 5.0 seconds or more (2 trip detection logic).
- P2256The A1A-/A2A- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- P2256The A1A-/A2A- voltage is higher than 4.5 V for 5.0 seconds or more (2 trip detection logic).
- U0101No communication from TCM continues
- P0031P0031
- P0031P0031
- P0031P0031
- P0032P0032
- P0032P0032
- P0032P0032
- P0046P0046
- P0046P0046
- P0047P0047
- P0047P0047
- P0048P0048
- P0048P0048
- P004BP004B
- P004BP004B
- P004CP004C
- P004CP004C
- P004DP004D
- P004DP004D
- P0051P0051
- P0051P0051
- P0051P0051
- P0052P0052
- P0052P0052
- P0052P0052
- P0069P0069
- P0069P0069
- P007CP007C
- P007CP007C
- P007DP007D
- P007DP007D
- P0087P0087
- P0087P0087
- P0088P0088
- P0088P0088
- P0093P0093
- P0093P0093
- P0100P0100
- P0100P0100
- P0100P0100
- P0101P0101
- P0101P0101
- P0106P0106
- P0106P0106
- P0107P0107
- P0107P0107
- P0108P0108
- P0108P0108
- P0112P0112
- P0112P0112
- P0113P0113
- P0113P0113
- P0115P0115
- P0115P0115
- P0116P0116
- P0116P0116
- P0117P0117
- P0117P0117
- P0118P0118
- P0118P0118
- P011CP011C
- P011CP011C
- P0122P0122
- P0122P0122
- P0123P0123
- P0123P0123
- P0180P0180
- P0180P0180
- P0182P0182
- P0182P0182
- P0183P0183
- P0183P0183
- P0190P0190
- P0190P0190
- P0192P0192
- P0192P0192
- P0193P0193
- P0193P0193
- P0201P0201
- P0201P0201
- P0201P0201
- P0202P0202
- P0202P0202
- P0202P0202
- P0203P0203
- P0203P0203
- P0203P0203
- P0204P0204
- P0204P0204
- P0204P0204
- P0205P0205
- P0205P0205
- P0205P0205
- P0206P0206
- P0206P0206
- P0206P0206
- P0207P0207
- P0207P0207
- P0207P0207
- P0208P0208
- P0208P0208
- P0208P0208
- P0222P0222
- P0222P0222
- P0223P0223
- P0223P0223
- P0299P0299
- P0299P0299
- P0301P0301
- P0301P0301
- P0302P0302
- P0302P0302
- P0303P0303
- P0303P0303
- P0304P0304
- P0304P0304
- P0305P0305
- P0305P0305
- P0306P0306
- P0306P0306
- P0307P0307
- P0307P0307
- P0308P0308
- P0308P0308
- P0335P0335
- P0335P0335
- P0339P0339
- P0339P0339
- P0340P0340
- P0340P0340
- P0400P0400
- P0400P0400
- P0405P0405
- P0405P0405
- P0406P0406
- P0406P0406
- P0407P0407
- P0407P0407
- P0408P0408
- P0408P0408
- P042EP042E
- P042EP042E
- P045EP045E
- P045EP045E
- P0488P0488
- P0488P0488
- P0500P0500
- P0500P0500
- P0504P0504
- P0504P0504
- P0545P0545
- P0545P0545
- P0546P0546
- P0546P0546
- P0548P0548
- P0548P0548
- P0549P0549
- P0549P0549
- P0560P0560
- P0560P0560
- P0560P0560
- P0606P0606
- P0606P0606
- P060AP060A
- P060AP060A
- P060BP060B
- P060BP060B
- P0617P0617
- P0617P0617
- P0627P0627
- P0627P0627
- P062DP062D
- P062DP062D
- P062DP062D
- P062EP062E
- P062EP062E
- P062EP062E
- P062FP062F
- P062FP062F
- P0630VIN not stored in ECM or VIN input into ECM not accurate (1 trip detection logic)
- P0630VIN not stored in ECM or VIN input into ECM not accurate (1 trip detection logic)
- P0724P0724
- P0724P0724
- P1229P1229
- P1229P1229
- P1251P1251
- P1251P1251
- P1271P1271
- P1271P1271
- P1272P1272
- P1272P1272
- P1603P1603
- P1603P1603
- P1604P1604
- P1604P1604
- P1605P1605
- P1605P1605
- P1607P1607
- P1607P1607
- P1608P1608
- P1608P1608
- P1609P1609
- P1609P1609
- P1626P1626
- P1626P1626
- P1627P1627
- P1627P1627
- P1629P1629
- P1629P1629
- P162AP162A
- P162AP162A
- P200CPM forced regeneration* *: When P200C, P200D are detected due to a DPF catalyst problem such as thermal...
- P200CPM forced regeneration* *: When P200C, P200D are detected due to a DPF catalyst problem such as thermal...
- P200DPM forced regeneration* *: When P200C, P200D are detected due to a DPF catalyst problem such as thermal...
- P200DPM forced regeneration* *: When P200C, P200D are detected due to a DPF catalyst problem such as thermal...
- P200EPM forced regeneration* *: When P200E, P200F are detected due to a DPF catalyst problem such as thermal...
- P200EPM forced regeneration* *: When P200E, P200F are detected due to a DPF catalyst problem such as thermal...
- P200FPM forced regeneration* *: When P200E, P200F are detected due to a DPF catalyst problem such as thermal...
- P200FPM forced regeneration* *: When P200E, P200F are detected due to a DPF catalyst problem such as thermal...
- P2032P2032
- P2032P2032
- P2033P2033
- P2033P2033
- P2035P2035
- P2035P2035
- P2036P2036
- P2036P2036
- P2084P2084
- P2084P2084
- P2086P2086
- P2086P2086
- P20CDP20CD
- P20CDP20CD
- P20CDP20CD
- P20CFP20CF
- P20CFP20CF
- P20D3P20D3
- P20D3P20D3
- P20D3P20D3
- P20D5P20D5
- P20D5P20D5
- P2120P2120
- P2120P2120
- P2121P2121
- P2121P2121
- P2122P2122
- P2122P2122
- P2123P2123
- P2123P2123
- P2125P2125
- P2125P2125
- P2127P2127
- P2127P2127
- P2128P2128
- P2128P2128
- P2138P2138
- P2138P2138
- P213BP213B
- P213BP213B
- P2195P2195
- P2195P2195
- P2197P2197
- P2197P2197
- P2226P2226
- P2226P2226
- P2228P2228
- P2228P2228
- P2229P2229
- P2229P2229
- P2237P2237
- P2237P2237
- P2238P2238
- P2238P2238
- P2239P2239
- P2239P2239
- P2240P2240
- P2240P2240
- P2241P2241
- P2241P2241
- P2242P2242
- P2242P2242
- P2252P2252
- P2252P2252
- P2253P2253
- P2253P2253
- P2255P2255
- P2255P2255
- P2256P2256
- P2256P2256
- P2428PM forced regeneration* *: When P2428, P2429 are detected due to a DPF catalyst problem such as thermal...
- P2428PM forced regeneration* *: When P2428, P2429 are detected due to a DPF catalyst problem such as thermal...
- P2429PM forced regeneration* *: When P2428, P2429 are detected due to a DPF catalyst problem such as thermal...
- P2429PM forced regeneration* *: When P2428, P2429 are detected due to a DPF catalyst problem such as thermal...
- P242BP242B
- P242BP242B
- P242CP242C
- P242CP242C
- P242DP242D
- P242DP242D
- P244BP244B
- P244BP244B
- P244CP244C
- P244CP244C
- P244EP244E
- P244EP244E
- P2453P2453
- P2453P2453
- P2454P2454
- P2454P2454
- P2455P2455
- P2455P2455
- P2458P2458
- P2458P2458
- P245FP245F
- P245FP245F
- P2460P2460
- P2460P2460
- P2461P2461
- P2461P2461
- P2463P2463
- P2463P2463
- P2465P2465
- P2465P2465
- P2467P2467
- P2467P2467
- P2468P2468
- P2468P2468
- P2469P2469
- P2469P2469
- P2564P2564
- P2564P2564
- P2565P2565
- P2565P2565
- P2588P2588
- P2588P2588
- P2589P2589
- P2589P2589
- P2610P2610
- P2610P2610
- P0046P0046
- P0046P0046
- P0047P0047
- P0047P0047
- P0048P0048
- P0048P0048
- P004BP004B
- P004BP004B
- P004CP004C
- P004CP004C
- P004DP004D
- P004DP004D
- P0069P0069
- P0069P0069
- P007CP007C
- P007DP007D
- P0087P0087
- P0087P0087
- P0088P0088
- P0088P0088
- P0093P0093
- P0093P0093
- P00AFP00AF
- P00B0P00B0
- P0100P0100
- P0101P0101
- P0101P0101
- P0102P0102
- P0102P0102
- P0103P0103
- P0103P0103
- P0105P0105
- P0106P0106
- P0106P0106
- P0107P0107
- P0107P0107
- P0108P0108
- P0108P0108
- P0110P0110
- P0112P0112
- P0112P0112
- P0113P0113
- P0113P0113
- P0115P0115
- P0115P0115
- P0116P0116
- P0116P0116
- P0117P0117
- P0117P0117
- P0118P0118
- P0118P0118
- P0122P0122
- P0122P0122
- P0123P0123
- P0123P0123
- P0168P0168
- P0168P0168
- P0180P0180
- P0180P0180
- P0182P0182
- P0182P0182
- P0183P0183
- P0183P0183
- P0190P0190
- P0190P0190
- P0192P0192
- P0192P0192
- P0193P0193
- P0193P0193
- P0222P0222
- P0222P0222
- P0223P0223
- P0223P0223
- P0299P0299
- P0299P0299
- P0335P0335
- P0335P0335
- P0339P0339
- P0339P0339
- P0340P0340
- P0340P0340
- P0400P0400
- P0400P0400
- P0405P0405
- P0405P0405
- P0406P0406
- P0406P0406
- P0407P0407
- P0407P0407
- P0408P0408
- P0408P0408
- P042EP042E
- P045EP045E
- P0488P0488
- P0488P0488
- P0500P0500
- P0500P0500
- P0504P0504
- P0504P0504
- P0560P0560
- P0560P0560
- P0560P0560
- P0606P0606
- P0606P0606
- P0607P0607
- P060AP060A
- P060BP060B
- P0617P0617
- P0617P0617
- P0627P0627
- P0627P0627
- P062DP062D
- P062DP062D
- P062DP062D
- P062EP062E
- P062EP062E
- P062EP062E
- P0630VIN not stored in ECM or VIN input into ECM not accurate (1 trip detection logic)
- P0724P0724
- P1229P1229
- P1229P1229
- P1238P1238
- P1238P1238
- P1248P1248
- P1251P1251
- P1251P1251
- P1258P1258
- P1259P1259
- P1260P1260
- P1262P1262
- P1263P1263
- P1495P1495
- P1496P1496
- P1497P1497
- P1601P1601
- P1601P1601
- P1604P1604
- P1604P1604
- P1605P1605
- P1605P1605
- P1607P1607
- P1611P1611
- P2120P2120
- P2120P2120
- P2121P2121
- P2121P2121
- P2122P2122
- P2122P2122
- P2123P2123
- P2123P2123
- P2125P2125
- P2125P2125
- P2127P2127
- P2127P2127
- P2128P2128
- P2128P2128
- P2138P2138
- P2138P2138
- P213BP213B
- P213BP213B
- P2226P2226
- P2226P2226
- P2228P2228
- P2228P2228
- P2229P2229
- P2229P2229
- P2563P2563
- P2564P2564
- P2564P2564
- P2565P2565
- P2565P2565
- P2588P2588
- P2588P2588
- P2589P2589
- P2589P2589
- U0101No communication with the ECM continues.
- P0500The vehicle speed signal from the vehicle speed sensor is cut for 0.14 second. or more while the cruise...
- P0503A momentary interruption and noise are detected when a rapid change of the vehicle speed occurs while the...
- P0571When the voltage of the STP terminal and the ST1- terminal of the ECM is below than 1 V for 0.5 second. or...
- P0571When voltage of STP terminal and that of ST1- terminal of ECM are less than 1 V for 0.5 seconds or more.
- P0575ECM has a supervisory CPU and control ECU inside. When each input STP signal is different this DTC is output....
- P0575When either of the following conditions is met: · STP signals input to the ECM supervisory CPU and control...
- P0607When the cruise control main switch is turned off, the ECM recognizes that the cruise control system is...
- P1578The ECM receives a brake system error signal for 0.2 sec. or more while the cruise control is operating.
- U0122While the vehicle speed is 40 km/h (25 mph) or more and the cruise control main switch (ON/OFF) is on,...
- C1A01When the engine switch is on (IG) and the dynamic radar cruise control system is operating, the driving...
- C1A02While the engine switch is on (IG) and the dynamic radar cruise control system is operating, the driving...
- C1A0AWhen the engine switch is on (IG) and the dynamic radar cruise control system is operating, the destination...
- C1A10While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating,...
- C1A11When the vehicle is being driven at a speed of 5 km/h (3 mph) or more and the dynamic radar cruise control...
- C1A14When the vehicle is being driven at a speed of 5 km/h (3 mph) or more and the dynamic radar cruise control...
- C1A4AWhile the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating,...
- C1A52Approximately 17 seconds after the engine switch is turned on (IG), the ECM cannot recognize the driving...
- P0500The vehicle speed signal from the vehicle speed sensor is cut for 0.14 seconds. or more while cruise control...
- P0503A momentary interruption and noise are detected when a rapid change of the vehicle speed occurs while the...
- P0571· This trouble code is output when the ECM detects the brake light relay error signal from the master...
- P0571/52 When voltage of STP terminal and that of ST1- terminal of ECM are less than 1 V for 0.5 seconds or more.
- P0571/76 While the dynamic radar cruise control system is operating (vehicle-to-vehicle distance control mode), the...
- P0575ECM has a supervisory CPU and control ECU inside. When each input STP signal is different this DTC is output....
- P0575When either of the following conditions is met: · STP signals input to the ECM supervisory CPU and control...
- P1570The ECM detects a radar sensor malfunction signal for 0.15 seconds. or more while the dynamic radar cruise...
- P1572The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- P1575The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- P1578During cruise control operation (vehicle-to-vehicle distance control mode), the brake system malfunctions.
- P1578The ECM receives a brake system error signal for 0.2 sec. or more while the cruise control is operating.
- P1615The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- P1616The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- P1617While the dynamic radar cruise control is either preparing for operation or operating, if designation signal...
- P1630The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- P1630While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating,...
- P1631The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- P1631While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating,...
- U0100The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- U0100While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a...
- U0122The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- U0122When the engine switch is on (IG) and the dynamic radar cruise control system is operating, a communication...
- U0123While cruise control is in operation (vehicle-to-vehicle distance control mode), the data sent from the yaw...
- U0125While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a...
- U0126While cruise control is in operation (vehicle-to-vehicle distance control mode), the data sent from the...
- U0126While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a...
- U0129While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a...
- U0235The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- U0235While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a...
- U1101The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- U1102The vehicle speed is 50 km/h (30 mph) or more with the cruise control main switch on (vehicle-to-vehicle...
- U1104Condition 1: · While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system...
- C1A102 seconds after the engine switch is turned on (IG), a signal from the millimeter wave radar sensor assembly...
- C1A112 seconds after the engine switch is turned on (IG), misalignment of the millimeter wave radar sensor...
- C1A142 seconds after the engine switch is turned on (IG), incompletion of the millimeter wave radar sensor...
- C1AA02 seconds after the engine switch is turned on (IG), the forward recognition camera detects an internal...
- C1AA12 seconds after the engine switch is turned on (IG), destination information stored in the forward...
- C1AA32 seconds after the engine switch is turned on (IG), a signal from the skid control ECU (master cylinder...
- C1AA4While driving with the forward recognition camera system activated, a signal from the yaw rate sensor...
- C1AA5While driving with the forward recognition camera system activated, a signal from the yaw rate sensor...
- C1AA6While driving with the forward recognition camera system activated, a signal from the skid control ECU...
- C1AA92 seconds after the engine switch is turned on (IG), the forward recognition camera detects that forward...
- C1AAA2 seconds after the engine switch is turned on (IG), the forward recognition camera cannot store the vehicle...
- C1AAEEither of the following conditions is met after 2 seconds have elapsed since the engine switch was turned on...
- U0100While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the ECM and the...
- U0101While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the ECM and the...
- U0123While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the yaw rate...
- U01292 seconds after the engine switch is turned on (IG), a communication error between the skid control ECU...
- U01422 seconds after the engine switch is turned on (IG), a communication error between the main body ECU...
- C1A012 seconds after the engine switch is turned on (IG), a malfunction in the driving support ECU assembly...
- C1A102 seconds after the engine switch is turned on (IG), a malfunction in the millimeter wave radar sensor...
- C1A112 seconds after the engine switch is turned on (IG), misalignment of the millimeter wave radar sensor...
- C1A142 seconds after the engine switch is turned on (IG), incompletion of the millimeter wave radar sensor...
- C1A472 seconds after the engine switch is turned on (IG), a signal from the steering sensor indicating that there...
- C1A482 seconds after the engine switch is turned on (IG), a signal from the yaw rate sensor indicating that there...
- C1A502 seconds after the engine switch is turned on (IG), a signal from the skid control ECU (master cylinder...
- C1A722 seconds after the engine switch is turned on (IG), a communication error between the driving support ECU...
- C1A73When the engine switch is on (IG) for 2 seconds or more, a communication malfunction between the forward...
- C1AA02 seconds after the engine switch is turned on (IG), the forward recognition camera detects an internal...
- C1AA12 seconds after the engine switch is turned on (IG), destination information stored in the forward...
- C1AA22 seconds after the engine switch is turned on (IG), a signal from the combination meter assembly indicating...
- C1AA32 seconds after the engine switch is turned on (IG), a signal from the skid control ECU (master cylinder...
- C1AA4While the vehicle is being driven at 5 km/h (3 mph) or more, a signal from the yaw rate sensor indicating a...
- C1AA5While the vehicle is being driven at 5 km/h (3 mph) or more, a signal from the yaw rate sensor indicating an...
- C1AA6While the vehicle is being driven at 5 km/h (3 mph) or more, a signal from the skid control ECU (master...
- C1AA92 seconds after the engine switch is turned on (IG), the forward recognition camera detects that forward...
- C1AAA2 seconds after the engine switch is turned on (IG), the forward recognition camera cannot store the vehicle...
- C1AAC2 seconds after the engine switch is turned on (IG), the vehicle information received from the ECM and that...
- C1AAD2 seconds after the engine switch is turned on (IG), the vehicle information from the ECM cannot be stored.
- U0100While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the ECM and the...
- U0101While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the TCM and the...
- U0123While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the yaw rate...
- U01262 seconds after the engine switch is turned on (IG), a communication error between the steering sensor and...
- U01292 seconds after the engine switch is turned on (IG), a communication error between the skid control ECU...
- U01422 seconds after the engine switch is turned on (IG), a communication error between the main body ECU...
- U0155While the engine switch is on (IG), a communication error between the combination meter assembly and the...
- U02352 seconds after the engine switch is turned on (IG), a communication error between the driving support ECU...
- U11042 seconds after the engine switch is turned on (IG), a communication error between the driving support ECU...
- C1AA0While the engine switch is on (IG), the forward recognition camera detects an internal malfunction for...
- C1AA1While the initial check is running, the engine switch is on (IG) and the road sign assist system is...
- C1AA2While the engine switch is on (IG), a signal indicating a malfunction is received from the combination meter...
- C1AA3While driving with the road sign assist system activated, a signal indicating a malfunction in the vehicle...
- C1AA4While driving with the road sign assist system activated, a yaw rate sensor malfunction signal sent from the...
- C1AA5While driving with the road sign assist system activated, a yaw rate sensor power supply voltage malfunction...
- C1AA6While driving with the road sign assist system activated, a yaw rate sensor zero point malfunction signal...
- C1AA8While the engine switch is on (IG) and the road sign assist system is operating, the forward recognition...
- C1AA9While the engine switch is on (IG), the forward recognition camera detects that forward recognition camera...
- C1AAAWhile the engine switch is on (IG), the forward recognition camera cannot store the country specification...
- U0100While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the ECM and the...
- U0101While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the TCM and the...
- U0123While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the yaw rate...
- U0129While the engine switch is on (IG), a communication error between the skid control ECU and the forward...
- U0142While the engine switch is on (IG), a communication error between the main body ECU (multiplex network body...
- U0155While the engine switch is on (IG), a communication error between the combination meter assembly and the...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0713The No. 1 ATF temperature sensor resistance is higher than 156 kΩ for 0.5 seconds or more, and one of the...
- P0713The No. 1 ATF temperature sensor resistance is higher than 156 kΩ for 0.5 seconds or more, and one of the...
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic). (a) Gear change is not...
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic). (a) Gear change is not...
- P0722All the conditions below are detected 500 times or more continuously (2 trip detection logic). (a) No signal...
- P0722All the conditions below are detected 500 times or more continuously (2 trip detection logic). (a) No signal...
- P0724The stop light switch remains on even when the vehicle is driven in a STOP (less than 3 km/h (2 mph)) and GO...
- P0724The stop light switch remains on even when the vehicle is driven in a STOP (less than 3 km/h (2 mph)) and GO...
- P0746The gear required by the ECM does not match the actual gear when driving (2 trip detection logic).
- P0746The gear required by the ECM does not match the actual gear when driving (2 trip detection logic).
- P0748· The ECM detects an open or short in the shift solenoid valve SL1 circuit while driving and shifting between...
- P0748· The ECM detects an open or short in the shift solenoid valve SL1 circuit while driving and shifting between...
- P0751The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0751The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0756The gear required by ECM does not match actual gear when driving (2 trip detection logic*1, 1 trip detection...
- P0756The gear required by ECM does not match actual gear when driving (2 trip detection logic*1, 1 trip detection...
- P0771The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0771The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0776The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0776The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0778· The ECM detects an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0778· The ECM detects an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0781The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0781The gear required by the ECM does not match the actual gear when driving (2 trip detection logic*1, 1 trip...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0985The ECM detects a short in the solenoid valve SR circuit 2 times when the solenoid valve SR is operated (1...
- P0985The ECM detects a short in the solenoid valve SR circuit 2 times when the solenoid valve SR is operated (1...
- P0986The ECM detects an open in the solenoid valve SR circuit 2 times when the solenoid valve SR is not operated...
- P0986The ECM detects an open in the solenoid valve SR circuit 2 times when the solenoid valve SR is not operated...
- P2714The ECM detects a malfunction of the SLT shift solenoid valve (ON side) according to the revolution...
- P2714The ECM detects a malfunction of the SLT shift solenoid valve (ON side) according to the revolution...
- P2716An open or short is detected in the shift solenoid valve SLT circuit for 1 sec. or more while driving (1 trip...
- P2716An open or short is detected in the shift solenoid valve SLT circuit for 1 sec. or more while driving (1 trip...
- P2742The No. 2 ATF temperature sensor resistance is below 25 Ω (0.046 V) for 0.5 sec. or more (1 trip detection...
- P2742The No. 2 ATF temperature sensor resistance is below 25 Ω (0.046 V) for 0.5 sec. or more (1 trip detection...
- P2743When 15 min. or more have elapsed after the engine is started, the No. 2 ATF temperature sensor resistance is...
- P2743When 15 min. or more have elapsed after the engine is started, the No. 2 ATF temperature sensor resistance is...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 80 km/h (50 mph)), or lock-up...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 80 km/h (50 mph)), or lock-up...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P0500While the vehicle is being driven, no vehicle speed sensor signal is transmitted to the ECM (2 trip detection...
- P0560The voltage at terminal BATT drops excessively for 3 seconds and part of the stored values in the ECU are...
- P0705One of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously (2...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0705When one of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0711Either condition is met (2-trip detection logic): (a) Certain monitor enabling conditions are met and the ATF...
- P0712No. 1 ATF temperature sensor resistance is less than 79 Ω for 0.5 sec. or more (1 trip detection logic).
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0712The No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0713ATF temperature sensor resistance is higher than 156 kΩ for 0.5 sec. or more and either condition is met (1...
- P0713ATF temperature sensor resistance is higher than 156 kΩ for 0.5 sec. or more and either condition is met (1...
- P0713ATF temperature sensor resistance is higher than 156 kΩ for 0.5 sec. or more and either condition is met (1...
- P0713The No. 1 ATF temperature sensor resistance is higher than 156 kΩ for 0.5 seconds or more, and one of the...
- P0713The No. 1 ATF temperature sensor resistance is higher than 156 kΩ for 0.5 seconds or more, and one of the...
- P0713When 15 min. or more have elapsed after engine is started, No. 1 ATF temperature sensor resistance is more...
- P0717All conditions are met for 5 seconds or more (1 trip detection logic): (a) Gear shift is not being performed....
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic). (a) Gear change is not...
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic). (a) Gear change is not...
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic). (a) Gear change is not...
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic). (a) Gear change is not...
- P0717All the conditions below are detected for 5 sec. or more (1 trip detection logic*1, 2 trip detection...
- P0722All conditions are met 5 seconds or more continuously (2 trip detection logic). (a) No signal from the speed...
- P0722All conditions are met 5 seconds or more continuously (2 trip detection logic): (a) No signal from speed...
- P0722All the conditions below are detected 500 times or more continuously (2 trip detection logic). (a) No signal...
- P0722All the conditions below are detected 500 times or more continuously (2 trip detection logic). (a) No signal...
- P0722All the conditions below are detected 500 times or more continuously (2 trip detection logic). (a) No signal...
- P0722All the conditions below are detected 500 times or more continuously (2 trip detection logic). (a) No signal...
- P0724The stop light switch remains on even when the vehicle is driven in a STOP (less than 3 km/h (2 mph)) and GO...
- P07296th gearshift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P07296th gearshift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P07296th gearshift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P0729A 6th gear shift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P0729A 6th gear shift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P0729A 6th gear shift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P0729A 6th gear shift malfunction: The ECM determines there is a malfunction when both of the following conditions...
- P0748The ECM checks for an open or short in the shift solenoid valve SL1 circuit while driving and shifting...
- P0748The ECM checks for an open or short in the shift solenoid valve SL1 circuit while driving and shifting...
- P0748The ECM checks for an open or short in the shift solenoid valve SL1 circuit while driving and shifting...
- P0748The ECM checks for an open or short in the shift solenoid valve SL1 circuit while driving and shifting...
- P0748The ECM checks for an open or short in the shift solenoid valve SL1 circuit while driving and shifting...
- P0751A shift solenoid valve S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the...
- P0751A shift solenoid valve S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the...
- P0751A shift solenoid valve S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the...
- P0751A shift solenoid valve S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the...
- P0751S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the following conditions are both...
- P0751S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the following conditions are both...
- P0751S1 stuck ON malfunction*1: The ECM determines there is a malfunction when the following conditions are both...
- P0756A shift solenoid valve S2 stuck ON malfunction*1: Shifting to 3rd and 5th gears is impossible. The ECM...
- P0756A shift solenoid valve S2 stuck ON malfunction*1: Shifting to 3rd and 5th gears is impossible. The ECM...
- P0756A shift solenoid valve S2 stuck ON malfunction*1: Shifting to 3rd and 5th gears is impossible. The ECM...
- P0756A shift solenoid valve S2 stuck ON malfunction*1: Shifting to 3rd and 5th gears is impossible. The ECM...
- P0756S2 stuck ON malfunction*1: Shifting to 3rd and 5th gears is impossible. The ECM determines there is a...
- P0756S2 stuck ON malfunction*1: Shifting to 3rd and 5th gears is impossible. The ECM determines there is a...
- P0761A shift solenoid valve S3 stuck ON malfunction*1: When the ECM directs the transmission to switch to 5th or...
- P0761A shift solenoid valve S3 stuck ON malfunction*1: When the ECM directs the transmission to switch to 5th or...
- P0761A shift solenoid valve S3 stuck ON malfunction*1: When the ECM directs the transmission to switch to 5th or...
- P0761A shift solenoid valve S3 stuck ON malfunction*1: When the ECM directs the transmission to switch to 5th or...
- P0761S3 stuck ON malfunction*1: When the ECM directs the gearshift to switch to 5th or 6th gear, the engine...
- P0761S3 stuck ON malfunction*1: When the ECM directs the gearshift to switch to 5th or 6th gear, the engine...
- P0761S3 stuck ON malfunction*1: When the ECM directs the gearshift to switch to 5th or 6th gear, the engine...
- P0766A shift solenoid valve S4 stuck OFF malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0766A shift solenoid valve S4 stuck OFF malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0766A shift solenoid valve S4 stuck OFF malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0766A shift solenoid valve S4 stuck OFF malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0766S4 stuck OFF malfunction or brake control valve malfunction*1: Shifting to 5th and 6th gears is impossible....
- P0766S4 stuck OFF malfunction or brake control valve malfunction*1: Shifting to 5th and 6th gears is impossible....
- P0766S4 stuck OFF malfunction or brake control valve malfunction*: Shifting to 5th and 6th gears is impossible....
- P0776A shift solenoid valve SL2 stuck ON malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0776A shift solenoid valve SL2 stuck ON malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0776A shift solenoid valve SL2 stuck ON malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0776A shift solenoid valve SL2 stuck ON malfunction or brake control valve malfunction*1: Shifting to 5th and 6th...
- P0776SL2 stuck ON malfunction or brake control valve malfunction*1: Shifting to 5th and 6th gears is impossible....
- P0776SL2 stuck ON malfunction or brake control valve malfunction*1: Shifting to 5th and 6th gears is impossible....
- P0776SL2 stuck ON malfunction or brake control valve malfunction*: Shifting to 5th and 6th gears is impossible....
- P0778The ECM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0778The ECM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0778The ECM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0778The ECM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0778The ECM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears...
- P0781When conditions (a) and (b), or (a) and (c) are met (2 trip detection logic). (a) When the ECM directs the...
- P0781When conditions (a) and (b), or (a) and (c) are met (2 trip detection logic). (a) When the ECM directs the...
- P0781When conditions (a) and (b), or (a) and (c) are met (2 trip detection logic*1, 1 trip detection logic*2). (a)...
- P0781When conditions (a) and (b), or (a) and (c) are met (2 trip detection logic*1, 1 trip detection logic*2). (a)...
- P0781When conditions (a) and (b), or (a) and (c) are met. (1 trip detection logic) (a) When the ECM directs the...
- P0781When conditions (a) and (b), or (a) and (c) are met. (2 trip detection logic*1, 1 trip detection logic*2) (a)...
- P0781When conditions (a) and (b), or (a) and (c) are met. (2 trip detection logic*1, 1 trip detection logic*2) (a)...
- P0894The ECM detects a malfunction in shift solenoid valve SLT, S1, S2, S3, S4 or SL2, or the 1-2 shift valve, or...
- P0894The ECM detects a malfunction in shift solenoid valve SLT, S1, S2, S3, S4 or SL2, or the 1-2 shift valve, or...
- P0894The ECM detects a malfunction of the SLT, S1, S2, S3, S4, SL2, gear 6 incorrect ratio (sequence valve) or 1-2...
- P0894The ECM detects a malfunction of the SLT, S1, S2, S3, S4, SL2, gear 6 incorrect ratio (sequence valve) or 1-2...
- P0894The ECM detects a malfunction of the SLT, S1, S2, S3, S4, SL2, gear 6 incorrect ratio (sequence valve) or 1-2...
- P0894The ECM detects a malfunction of the SLT, S1, S2, S3, S4, SL2, gear 6 incorrect ratio (sequence valve) or 1-2...
- P0973ECM detects a short in the solenoid valve S1 circuit 2 times when solenoid valve S1 is operated (1 trip...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0973The ECM detects a short in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is operated (1...
- P0974ECM detects an open in the solenoid valve S1 circuit 2 times when solenoid valve S1 is not operated (1 trip...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0974The ECM detects an open in the solenoid valve S1 circuit 2 times when the solenoid valve S1 is not operated...
- P0976ECM detects a short in the solenoid valve S2 circuit 2 times when solenoid valve S2 is operated (1 trip...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0976The ECM detects a short in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is operated (1...
- P0977ECM detects an open in the solenoid valve S2 circuit 2 times when solenoid valve S2 is not operated (1 trip...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0977The ECM detects an open in the solenoid valve S2 circuit 2 times when the solenoid valve S2 is not operated...
- P0979ECM detects short in solenoid valve S3 circuit 2 times when solenoid valve S3 is operated (1 trip detection...
- P0979The ECM detects a short in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is operated (1...
- P0979The ECM detects a short in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is operated (1...
- P0979The ECM detects a short in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is operated (1...
- P0979The ECM detects a short in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is operated (1...
- P0979The ECM detects a short in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is operated (1...
- P0979The ECM detects a short in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is operated (1...
- P0980ECM detects open in solenoid valve S3 circuit 2 times when solenoid valve S3 is not operated (1 trip...
- P0980The ECM detects an open in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is not operated...
- P0980The ECM detects an open in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is not operated...
- P0980The ECM detects an open in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is not operated...
- P0980The ECM detects an open in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is not operated...
- P0980The ECM detects an open in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is not operated...
- P0980The ECM detects an open in the solenoid valve S3 circuit 2 times when the solenoid valve S3 is not operated...
- P0982ECM detects short in solenoid valve S4 circuit 2 times when solenoid valve S4 is operated (1 trip detection...
- P0982The ECM detects a short in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is operated (1...
- P0982The ECM detects a short in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is operated (1...
- P0982The ECM detects a short in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is operated (1...
- P0982The ECM detects a short in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is operated (1...
- P0982The ECM detects a short in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is operated (1...
- P0982The ECM detects a short in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is operated (1...
- P0983ECM detects open in solenoid valve S4 circuit 2 times when solenoid valve S4 is not operated (1 trip...
- P0983The ECM detects an open in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is not operated...
- P0983The ECM detects an open in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is not operated...
- P0983The ECM detects an open in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is not operated...
- P0983The ECM detects an open in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is not operated...
- P0983The ECM detects an open in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is not operated...
- P0983The ECM detects an open in the solenoid valve S4 circuit 2 times when the solenoid valve S4 is not operated...
- P0985ECM detects a short in the solenoid valve SR circuit 2 times when solenoid valve SR is operated (1 trip...
- P0985The ECM detects a short in the solenoid valve SR circuit 2 times when the solenoid valve SR is operated (1...
- P0985The ECM detects a short in the solenoid valve SR circuit 2 times when the solenoid valve SR is operated (1...
- P0985The ECM detects a short in the solenoid valve SR circuit 2 times when the solenoid valve SR is operated (1...
- P0985The ECM detects a short in the solenoid valve SR circuit 2 times when the solenoid valve SR is operated (1...
- P0986ECM detects an open in the solenoid valve SR circuit 2 times when solenoid valve SR is not operated (1 trip...
- P0986The ECM detects an open in the solenoid valve SR circuit 2 times when the solenoid valve SR is not operated...
- P0986The ECM detects an open in the solenoid valve SR circuit 2 times when the solenoid valve SR is not operated...
- P0986The ECM detects an open in the solenoid valve SR circuit 2 times when the solenoid valve SR is not operated...
- P0986The ECM detects an open in the solenoid valve SR circuit 2 times when the solenoid valve SR is not operated...
- P2714The ECM detects a malfunction in shift solenoid valve SLT (ON side) according to the difference in speed of...
- P2714The ECM detects a malfunction in shift solenoid valve SLT (ON side) according to the difference in speed of...
- P2714The ECM detects a malfunction in shift solenoid valve SLT (ON side) according to the difference in speed of...
- P2714The ECM detects a malfunction of the SLT shift solenoid valve (ON side) according to the revolution...
- P2714The ECM detects a malfunction of the SLT shift solenoid valve (ON side) according to the revolution...
- P2714The ECM detects a malfunction of the SLT shift solenoid valve (ON side) according to the revolution...
- P2714The ECM detects a malfunction of the SLT shift solenoid valve (ON side) according to the revolution...
- P2716Conditions (a) or (b) below are detected for 1 sec. or more (1 trip detection logic). (a) SLT - terminal: 0 V...
- P2716Conditions (a) or (b) below are detected for 1 sec. or more (1 trip detection logic). (a) SLT - terminal: 0 V...
- P2716Conditions (a) or (b) below are detected for 1 sec. or more (1 trip detection logic). (a) SLT - terminal: 0 V...
- P2716Conditions (a) or (b) below are detected for 1 sec. or more (1 trip detection logic). (a) SLT - terminal: 0 V...
- P2716Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip...
- P2716Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip...
- P2716Open or short is detected in the shift solenoid valve SLT circuit for 1 second or more while driving (1 trip...
- P2742No. 2 ATF temperature sensor resistance is less than 25 Ω (0.046 V) for 0.5 seconds or more (1 trip detection...
- P2742No. 2 ATF temperature sensor resistance is less than 25 Ω (0.046 V) for 0.5 seconds or more (1 trip detection...
- P2742The No. 2 ATF temperature sensor resistance is below 25 Ω (0.046 V) for 0.5 sec. or more (1 trip detection...
- P2742The No. 2 ATF temperature sensor resistance is below 25 Ω (0.046 V) for 0.5 sec. or more (1 trip detection...
- P2742The No. 2 ATF temperature sensor resistance is below 25 Ω (0.046 V) for 0.5 sec. or more (1 trip detection...
- P2742The No. 2 ATF temperature sensor resistance is below 25 Ω (0.046 V) for 0.5 sec. or more (1 trip detection...
- P2743ATF temperature sensor resistance is higher than 156 kΩ (4.915 V) for 0.5 sec. or more and either condition...
- P2743ATF temperature sensor resistance is higher than 156 kΩ (4.915 V) for 0.5 sec. or more and either condition...
- P2743ATF temperature sensor resistance is higher than 156 kΩ (4.915 V) for 0.5 sec. or more and either condition...
- P2743When 15 min. or more have elapsed after the engine is started, the No. 2 ATF temperature sensor resistance is...
- P2743When 15 min. or more have elapsed after the engine is started, the No. 2 ATF temperature sensor resistance is...
- P2743When 15 minutes or more have elapsed after engine is started, No. 2 ATF temperature sensor resistance is more...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 100 km/h (62 mph)), or lock-up...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 100 km/h (62 mph)), or lock-up...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 80 km/h (50 mph)), or lock-up...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 80 km/h (50 mph)), or lock-up...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 80 km/h (50 mph)), or lock-up...
- P2757Lock-up does not occur when driving in the lock-up range (normal driving at 80 km/h (50 mph)), or lock-up...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759An open or short is detected in the shift solenoid valve SLU circuit for 1 sec. or more while driving (1 trip...
- P2759Open or short is detected in the shift solenoid valve SLU circuit for 1 second or more while driving (1 trip...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- P2772The transfer L4 position switch remains on while the vehicle is running under the following conditions for...
- U0100No communication with the ECM continues (1 trip detection logic).
- P0705One of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously (2...
- P0711Either condition is met: (2 trip detection logic) · (a) Certain monitor enabling conditions are met and the...
- P0712No. 1 ATF temperature sensor resistance is below 79 Ω for 0.5 seconds or more (1 trip detection logic).
- P0713No. 1 ATF temperature sensor resistance is higher than 156 kΩ for 0.5 seconds or more and either condition is...
- P0717All conditions are met for 5 seconds or more (1 trip detection logic): (a) Park/neutral position switch D...
- P0722All conditions are met for 5 seconds or more (2 trip detection logic): (a) Park/neutral position switch D...
- P0741Lock-up does not occur when requested (2 trip detection logic).
- P0746Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 1st, 2nd, 3rd or...
- P0748An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P0776Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 4th, 5th or 6th...
- P0778An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P077CWhen the transmission revolution sensor (SP2) input voltage is below 0.1 V for 4.5 seconds or more (2 trip...
- P077DWhen the transmission revolution sensor (SP2) input voltage is higher than 1.9 V for 4.5 seconds or more (2...
- P0796Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 2nd or 6th gear is...
- P0798An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P07BFWhen the transmission revolution sensor (NT) input voltage is below 0.1 V for 4.5 seconds or more (1 trip...
- P07C0When the transmission revolution sensor (NT) input voltage is higher than 1.9 V for 4.5 seconds or more (1...
- P2714The ECM detects a malfunction in the shift solenoid valve SLT (ON side) according to the difference in the...
- P2716Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip...
- P2742No. 2 ATF temperature sensor resistance is below 25 Ω for 0.5 seconds or more (1 trip detection logic).
- P2743No. 2 ATF temperature sensor resistance is higher than 156 kΩ for 0.5 seconds or more and either condition is...
- P2757Both conditions are met (2 trip detection logic): · Lock-up does not occur when requested. · Lock-up occurs...
- P2759Open or short is detected in shift solenoid valve SLU circuit for 1 second or more while driving (1 trip...
- P2769ECM detects a short in the shift solenoid valve SL circuit when the shift solenoid valve SL is operated (2...
- P2770ECM detects an open in the shift solenoid valve SL circuit when the shift solenoid valve SL is not operated...
- P2773Transfer L4 position switch remains on while the vehicle is being driven under the following conditions for...
- P2774Transfer L4 position switch remains off while the vehicle is being driven under the following conditions for...
- P2808Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 3rd or 5th gear is...
- P2810An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P05001. Transmission revolution sensor (SP2) value is 9 km/h (5.59 mph) or more 2. Vehicle speed signal is not...
- P06041. The engine switch is on (IG) 2. TCM internal error (RAM) 3. - 4. 1-trip detection logic
- P06051. The engine switch is on (IG) 2. TCM internal error (ROM) 3. - 4. 1-trip detection logic
- P06061. The engine switch is on (IG) 2. TCM internal error 3. - 4. 1-trip detection logic
- P062F1. The engine switch is on (IG) 2. TCM internal error (EEPROM) 3. - 4. 1-trip detection logic
- P07051. Battery voltage is 9.5 V or higher. 2. No signal of the A, B, C and PA signals. 3. 5 seconds or more 4....
- P07051. Battery voltage is 9.5 V or higher. 2. No signal of the A, B, C and PA signals. 3. 5 seconds or more 4....
- P07111. Certain monitor enabling conditions are met. 2. ATF temperature is below 20°C (68°F) 3. 3 seconds 4....
- P07111. Certain monitor enabling conditions are met. 2. ATF temperature is below 20°C (68°F) 3. 3 seconds 4....
- P07121. The battery voltage is 9.5 V or higher. 2. No. 1 ATF temperature sensor voltage is below 0.08 V 3. 60...
- P07131. The battery voltage is 9.5 V or higher, engine speed is more than 400 rpm and shift lever in D. 2. No. 1...
- P07171. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, output speed is 300 rpm or more and...
- P07221. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, output speed calculated by turbine...
- P0746SL1 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P0746SL1 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P07481. Driving so that gear changes occur 2. Shift solenoid valve SL1 circuit is open or shorted 3. 2 seconds 4....
- P076B1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P076B1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P076C1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with S1...
- P076C1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with S1...
- P0776SL2 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P0776SL2 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P07781. Driving so that gear changes occur 2. Shift solenoid valve SL2 circuit is open or shorted 3. 2 seconds 4....
- P077C1. Battery voltage is 9.5 V or higher. 2. Transmission revolution sensor (SP2) input voltage is below 0.2199...
- P077D1. Battery voltage is 9.5 V or higher. 2. Transmission revolution sensor (SP2) input voltage is higher than...
- P0796SL3 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P0796SL3 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P07981. Driving so that gear changes occur 2. Shift solenoid valve SL3 circuit is open or shorted 3. 2 seconds 4....
- P07BF1. Battery voltage is 9.5 V or higher. 2. Transmission revolution sensor (NT) input voltage is below 0.2199...
- P07C01. Battery voltage is 9.5 V or higher. 2. Transmission revolution sensor (NT) input voltage is higher than...
- P08121. Battery voltage is 9.5 V or higher, shift lever in R and DTC P0705 is not detected 2. R terminal voltage...
- P08CD1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P08CD1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P08CE1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P08CE1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P08D21. Shift solenoid valve SC2 is operated 2. Shift solenoid valve SC2 terminal voltage level is low 3. 0.5...
- P08D31. Shift solenoid valve SC2 is not operated 2. Shift solenoid valve SC2 terminal voltage level is high 3. 0.5...
- P099E1. Shift solenoid valve SC1 is operated 2. Shift solenoid valve SC1 terminal voltage level is low 3. 0.5...
- P099F1. Shift solenoid valve SC1 is not operated 2. Shift solenoid valve SC1 terminal voltage level is high 3. 0.5...
- P27141. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P27141. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P27161. Engine is running 2. Shift solenoid valve SLT circuit is open or shorted 3. 2 seconds 4. 1-trip detection...
- P27421. The battery voltage is 9.5 V or higher. 2. No. 2 ATF temperature sensor voltage is below 0.08 V 3. 60...
- P27431. The battery voltage is 9.5 V or higher, engine speed is more than 400 rpm and shift lever in D. 2. No. 2...
- P27571. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P27571. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P27571. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the vehicle is driven with the...
- P27591. Vehicle is being driven 2. Shift solenoid valve SLU circuit is open or shorted 3. 2 seconds 4. 1-trip...
- P27721. The transfer position switch is in H4 and transfer output shaft speed is between 1000 and 3000 rpm 2. The...
- P27721. The transfer position switch is in H4 and transfer output shaft speed is between 1000 and 3000 rpm 2. The...
- P2808SL4 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P2808SL4 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P28101. Driving so that gear changes occur 2. Shift solenoid valve SL4 circuit is open or shorted 3. 2 seconds 4....
- P2817SL5 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P2817SL5 stuck ON malfunction: 1. Battery voltage is 9.5 V or higher, engine speed is more than 400 rpm, and the...
- P28191. Driving so that gear changes occur 2. Shift solenoid valve SL5 circuit is open or shorted 3. 2 seconds 4....
- U01001. Battery voltage is 9.5 V or higher. 2. No communication between the ECM and TCM 3. 1.25 seconds 4. 1-trip...
- U0121U0121
- P163B1. While the ignition switch is turned to ON or directly after the ignition switch is turned to ON 2. 4 wheel...
- P17A81. When switching between high and low or during switching operation (high-low transfer shift motor...
- P17A91. While the ignition switch is turned to ON or directly after the ignition switch is turned to ON (high-low...
- P17AA1. While the ignition switch is turned to ON or directly after the ignition switch is turned to ON (high-low...
- P17AC1. When switching between high and low (high-low transfer shift motor operating) while the ignition switch is...
- P17C21. When rear differential is switching between free and lock (differential lock shift motor operating) with...
- P17C31. When rear differential is switching between free and lock (differential lock shift motor operating) with...
- P17D01. While the ignition switch is turned to ON or directly after the ignition switch is turned to ON 2. Center...
- P17D01. While the ignition switch is turned to ON or directly after the ignition switch is turned to ON 2. Center...
- P17DE1. When switching between free and lock or during switching operation (center differential lock shift motor...
- P17DF1. When switching between free and lock (center differential lock shift motor operating) while the ignition...
- U01001. Ignition switch turned to ON (3 seconds elapse after ignition switch is turned to ON) 2. Communication is...
- U01221. Ignition switch turned to ON (3 seconds elapse after ignition switch is turned to ON) 2. Communication is...
- U04161. Ignition switch ON (3 seconds elapse after ignition switch is turned to ON) 2. Wheel speed sensor...
- C1711When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1711When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1712When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1712When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1713When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1713When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1714When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1714When one of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or higher,...
- C1715When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1715When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1716When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1716When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1717When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1717When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1718When one of the following conditions is met: · When detecting an abnormal signal from the pressure sensor...
- C1718When one of the following conditions is met: · When detecting an abnormal signal from the pressure sensor...
- C1719When one of the following conditions is met: · When detecting an abnormal signal from the fluid temperature...
- C1719When one of the following conditions is met: · When detecting an abnormal signal from the fluid temperature...
- C1731When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1731When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1732When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1732When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1733When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1733When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1734When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1734When either of the following is detected: · An actuator open-circuit signal is detected for at least 1 second...
- C1736When either of the following is detected: · With the spring rate switch valve RH not activated, an open...
- C1736When either of the following is detected: · With the spring rate switch valve RH not activated, an open...
- C1737When either of the following is detected: · With the spring rate switch valve LH not activated, an open...
- C1737When either of the following is detected: · With the spring rate switch valve LH not activated, an open...
- C1741When either of the following is detected: · With the front leveling valve RH not activated, an open signal of...
- C1741When either of the following is detected: · With the front leveling valve RH not activated, an open signal of...
- C1742When either of the following is detected: · With the front leveling valve LH not activated, an open signal of...
- C1742When either of the following is detected: · With the front leveling valve LH not activated, an open signal of...
- C1743When either of the following is detected: · With the rear leveling valve RH not activated, an open signal of...
- C1743When either of the following is detected: · With the rear leveling valve RH not activated, an open signal of...
- C1744When either of the following is detected: · With the rear leveling valve LH not activated, an open signal of...
- C1744When either of the following is detected: · With the rear leveling valve LH not activated, an open signal of...
- C1753When either of the following is detected: · With the accumulator valve not activated, an open signal of the...
- C1753When either of the following is detected: · With the accumulator valve not activated, an open signal of the...
- C1754When either of the following is detected: · With the front gate valve not activated, an open signal of the...
- C1754When either of the following is detected: · With the front gate valve not activated, an open signal of the...
- C1755When either of the following is detected: · With the rear gate valve not activated, an open signal of the...
- C1755When either of the following is detected: · With the rear gate valve not activated, an open signal of the...
- C1756When either of the following is detected: · With the suspension control relay not activated, an open signal...
- C1756When either of the following is detected: · With the suspension control relay not activated, an open signal...
- C1763When either of the following conditions is met: · While the motor relay is in operation, the condition that...
- C1763When either of the following conditions is met: · While the motor relay is in operation, the condition that...
- C1764When the height control pump and motor activates and the fluid pressure is 18.5 MPa (188.6 kgf/cm2, 2683 psi)...
- C1764When the height control pump and motor activates and the fluid pressure is 18.5 MPa (188.6 kgf/cm2, 2683 psi)...
- C1765When the height control pump and motor activates and the fluid pressure is 18.5 MPa (188.6 kgf/cm2, 2683 psi)...
- C1765When the height control pump and motor activates and the fluid pressure is 18.5 MPa (188.6 kgf/cm2, 2683 psi)...
- C1766When the height control pump and motor operates continuously for 135 seconds.
- C1766When the height control pump and motor operates continuously for 135 seconds.
- C1781A suspension control ECU malfunction is detected.
- C1781A suspension control ECU malfunction is detected.
- C1782While the engine switch is on (IG), voltage at terminal IG, BAT and/or BAT2 is 10 V or less, or 16 V or more...
- C1782While the engine switch is on (IG), voltage at terminal IG, BAT and/or BAT2 is 10 V or less, or 16 V or more...
- C1783A speed sensor circuit malfunction for 1 second or more.
- C1783A speed sensor circuit malfunction for 1 second or more.
- C1784A steering angle sensor signal malfunction is detected, or the steering angle sensor power malfunction signal...
- C1784A steering sensor signal malfunction is detected, or the steering sensor power malfunction signal is detected...
- C1785While the engine switch is on (IG), the steering control ECU malfunction signal is received for 5 seconds.
- C1785While the engine switch is on (IG), the steering control ECU malfunction signal is received for 5 seconds.
- C1787While the engine switch is on (IG), the acceleration sensor (airbag sensor assembly) malfunction signal is...
- C1787While the engine switch is on (IG), the yaw rate sensor malfunction signal is detected for 1 second or more.
- C1791The test mode procedure is performed.
- C1792The test mode procedure is performed.
- C1792The test mode procedure is performed.
- C1794The test mode procedure is performed.
- C1794The test mode procedure is performed.
- C1796When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1796When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1797When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1797When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1798When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- C1798When either of the following conditions is met: · With the engine switch on (IG), a voltage of 4.7 V or...
- U0100While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and ECM stops for 3...
- U0100While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and ECM stops for 3...
- U0101While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and ECM stops for 3...
- U0101While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and ECM stops for 3...
- U0114While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and 4 wheel drive...
- U0114While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and four wheel drive...
- U0122CAN communication between the suspension control ECU and skid control ECU (master cylinder solenoid) stops...
- U0122CAN communication between the suspension control ECU and skid control ECU stops for 3 seconds or more.
- U0124CAN communication between the suspension control ECU and acceleration sensor (airbag sensor assembly) stops...
- U0124CAN communication between the suspension control ECU and yaw rate sensor stops for 3 seconds or more.
- U0126CAN communication between the suspension control ECU and steering sensor stops for 3 seconds or more.
- U0126CAN communication between the suspension control ECU and steering sensor stops for 3 seconds or more.
- U01305 seconds after the engine switch is turned on (IG), CAN communication between the suspension control ECU and...
- U01305 seconds after the engine switch is turned on (IG), CAN communication between the suspension control ECU and...
- U0140CAN communication between the suspension control ECU and main body ECU (multiplex network body ECU) stops for...
- U0140CAN communication between the suspension control ECU and main body ECU stops for 5 seconds or more.
- B1247In diagnostic mode, an applicable RDA signal cannot be received within 10 seconds after a PRG signal is sent...
- B1247In diagnostic mode, an applicable RDA signal cannot be received within 10 seconds after a PRG signal is sent...
- B1247In diagnostic mode, an applicable RDA signal cannot be received within 10 seconds after a PRG signal is sent...
- C2111/11 Tire pressure warning valve and transmitters stop transmitting signals
- C2111/11 Tire pressure warning valve and transmitters stop transmitting signals
- C2111/11 Tire pressure warning valve and transmitters stop transmitting signals
- C2111/11 Tire pressure warning valve and transmitters stop transmitting signals
- C2112/12 Tire pressure warning valve and transmitters stop transmitting signals
- C2112/12 Tire pressure warning valve and transmitters stop transmitting signals
- C2112/12 Tire pressure warning valve and transmitters stop transmitting signals
- C2112/12 Tire pressure warning valve and transmitters stop transmitting signals
- C2113/13 Tire pressure warning valve and transmitters stop transmitting signals
- C2113/13 Tire pressure warning valve and transmitters stop transmitting signals
- C2113/13 Tire pressure warning valve and transmitters stop transmitting signals
- C2113/13 Tire pressure warning valve and transmitters stop transmitting signals
- C2114/14 Tire pressure warning valve and transmitters stop transmitting signals
- C2114/14 Tire pressure warning valve and transmitters stop transmitting signals
- C2114/14 Tire pressure warning valve and transmitters stop transmitting signals
- C2114/14 Tire pressure warning valve and transmitters stop transmitting signals
- C2115/15 Tire pressure warning valve and transmitters stop transmitting signals
- C2115/15 Tire pressure warning valve and transmitters stop transmitting signals
- C2115/15 Tire pressure warning valve and transmitters stop transmitting signals
- C2115/15 Tire pressure warning valve and transmitters stop transmitting signals
- C2121/21 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2121/21 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2121/21 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2121/21 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2122/22 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2122/22 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2122/22 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2122/22 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2123/23 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2123/23 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2123/23 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2123/23 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2124/24 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2124/24 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2124/24 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2124/24 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2125/25 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2125/25 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2125/25 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2125/25 Following condition (a) or (b) is met: (a) When all conditions below are met: · Tire pressure warning valve...
- C2126/26 After ID registration is completed, ECU does not receive radio waves from transmitters whose IDs are stored...
- C2126/26 After ID registration is completed, ECU does not receive radio waves from transmitters whose IDs are stored...
- C2126/26 After ID registration is completed, ECU does not receive radio waves from transmitters whose IDs are stored...
- C2126/26 After ID registration is completed, ECU does not receive radio waves from transmitters whose IDs are stored...
- C2141/41 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2141/41 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2141/41 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2142/42 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2142/42 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2142/42 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2143/43 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2143/43 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2143/43 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2144/44 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2144/44 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2144/44 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2145/45 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2145/45 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2145/45 If an "ERROR" signal is received 3 times consecutively, the tire pressure warning valve and transmitter will...
- C2162/62 The system does not switch to the wireless door lock control system (w/o Entry and Start System) or tire...
- C2171/71 Transmitter ID code is not registered. (When an ID code is unregistered for 3 minutes or more)
- C2171/71 Transmitter ID code is not registered. (When an ID code is unregistered for 3 minutes or more)
- C2171/71 Transmitter ID code is not registered. (When an ID code is unregistered for 3 minutes or more.)
- C2176/76 Malfunction in the tire pressure warning ECU and receiver internal circuit
- C2176/76 Malfunction in the tire pressure warning ECU and receiver internal circuit
- C2176/76 Malfunction in the tire pressure warning ECU and receiver internal circuit
- C2177/77 All conditions below are met: · During initialization · Tire pressure warning valve and transmitter is not in...
- C2177/77 All conditions below are met: · During initialization · Tire pressure warning valve and transmitter is not in...
- C2177/77 All conditions below are met: · During initialization · Tire pressure warning valve and transmitter is not in...
- C2177/77 All conditions below are met: · During initialization · Tire pressure warning valve and transmitter is not in...
- C2179/79 Communication between the main body ECU (multiplex network body ECU) and tire pressure warning ECU and...
- C2179/79 Communication between the main body ECU (multiplex network body ECU) and tire pressure warning ECU and...
- C2179/79 Communication between the main body ECU (multiplex network body ECU) and tire pressure warning ECU and...
- C2179/79 Tire pressure warning ECU and receiver communication disruption.
- C2181/81 Test mode procedure is performed.
- C2181/81 Test mode procedure is performed.
- C2181/81 Test mode procedure is performed.
- C2181/81 Test mode procedure is performed.
- C2182/82 Test mode procedure is performed.
- C2182/82 Test mode procedure is performed.
- C2182/82 Test mode procedure is performed.
- C2182/82 Test mode procedure is performed.
- C2183/83 Test mode procedure is performed.
- C2183/83 Test mode procedure is performed.
- C2183/83 Test mode procedure is performed.
- C2183/83 Test mode procedure is performed.
- C2184/84 Test mode procedure is performed.
- C2184/84 Test mode procedure is performed.
- C2184/84 Test mode procedure is performed.
- C2184/84 Test mode procedure is performed.
- C2185/85 Test mode procedure is performed.
- C2185/85 Test mode procedure is performed.
- C2185/85 Test mode procedure is performed.
- C2185/85 Test mode procedure is performed.
- C2191/91 Speed sensor circuit malfunction
- C2195/95 Test mode procedure is performed.
- C2195/95 Test mode procedure is performed.
- C2195/95 Test mode procedure is performed.
- C2198/98 Test mode procedure is performed.
- C2198/98 Test mode procedure is performed.
- C2198/98 Test mode procedure is performed.
- C2198/98 Test mode procedure is performed.
- U0129/29 Lost communication with skid control ECU (brake actuator assembly)
- C1225An open or short circuit in the SMCF circuit continues for 0.05 seconds or more.
- C1225An open or short circuit in the SMCF circuit continues for 0.05 seconds or more.
- C1226An open or short circuit in the SREA circuit continues for 0.05 seconds or more.
- C1226An open or short circuit in the SREA circuit continues for 0.05 seconds or more.
- C1227An open or short circuit in the SREC circuit continues for 0.05 seconds or more.
- C1227An open or short circuit in the SREC circuit continues for 0.05 seconds or more.
- C1228An open or short circuit in the STR circuit continues for 0.05 seconds or more.
- C1228An open or short circuit in the STR circuit continues for 0.05 seconds or more.
- C1241Either condition is met: 1. Both of the following conditions continue for at least 10 seconds. · The vehicle...
- C1241Either condition is met: 1. Both of the following conditions continue for at least 10 seconds. · The vehicle...
- C1242The vehicle speed is 3 km/h (2 mph) or more and the voltage at the ECU IG2 terminal remains below 6.5 V for...
- C1242The vehicle speed is 3 km/h (2 mph) or more and the voltage at the ECU IG2 terminal remains below 6.5 V for...
- C1243The following condition repeats 16 times. · Sensor signal do not change when the vehicle decelerates from 30...
- C1243The following condition repeats 16 times. · Sensor signal do not change when the vehicle decelerates from 30...
- C1245The following condition continues for at least 60 seconds. · The difference between the values calculated...
- C1245The following condition continues for at least 60 seconds. · The difference between the values calculated...
- C1251There is an open in the motor system circuit (motor input circuit).
- C1251There is an open in the motor system circuit (motor input circuit).
- C1252The motor operates for 3 minutes or more.
- C1252The motor operates for 3 minutes or more.
- C1253There is a motor system circuit (motor input circuit) malfunction.
- C1253There is a motor system circuit (motor input circuit) malfunction.
- C1254There is an accumulator pressure sensor malfunction (the fluid pressure does not change when the pump...
- C1254There is an accumulator pressure sensor malfunction (the fluid pressure does not change when the pump...
- C1256The fluid pressure inside the accumulator is below the standard value.
- C1256The fluid pressure inside the accumulator is below the standard value.
- C1257There is an open in the motor system circuit (motor input circuit).
- C1257There is an open in the motor system circuit (motor input circuit).
- C1268The skid control ECU receives an L4 abnormal status signal from the 4 wheel drive control ECU via CAN...
- C1268The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via CAN...
- C1271Stored only during test mode.
- C1271Stored only during test mode.
- C1272Stored only during test mode.
- C1272Stored only during test mode.
- C1273Stored only during test mode.
- C1273Stored only during test mode.
- C1274Stored only during test mode.
- C1274Stored only during test mode.
- C1275Stored only during test mode.
- C1275Stored only during test mode.
- C1276Stored only during test mode.
- C1276Stored only during test mode.
- C1277Stored only during test mode.
- C1277Stored only during test mode.
- C1278Stored only during test mode.
- C1278Stored only during test mode.
- C1279Stored during test mode.
- C1279Stored during test mode.
- C1281Detected only during Test Mode
- C1282Stored during test mode.
- C1282Stored during test mode.
- C1282Stored during test mode.
- C1336Zero point calibration of the deceleration sensor is incomplete.
- C1336Zero point calibration of the deceleration sensor is incomplete.
- C1337Either condition is met: · The diameter of the 2 front wheels and 2 rear wheels is different. · There is a...
- C1337Either condition is met: · The diameter of the 2 front wheels and 2 rear wheels is different. · There is a...
- C1381At a vehicle speed of more than 3 km/h (2 mph), the deceleration sensor power source malfunction signal is...
- C1381At a vehicle speed of more than 3 km/h (2 mph), the deceleration sensor power source malfunction signal is...
- C1401One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1401One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1402One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1402One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1403One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1403One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1404One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1404One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1405Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1405Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1406Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1406Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1407Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1407Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1408Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1408Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1409One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1409One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1410One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1410One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1411One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1411One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1412One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1412One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1413One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1413One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1414One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1414One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1415One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1415One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1416One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1416One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1417The IG1 terminal voltage is 17.4 V or higher for 0.8 seconds or more.
- C1417The IG1 terminal voltage is 17.4 V or higher for 0.8 seconds or more.
- C1418One of the following conditions is met when the voltage at terminal IG1 is 9.5 V or higher: · The power...
- C1418One of the following conditions is met when the voltage at terminal IG1 is 9.5 V or higher: · The power...
- C1421Either condition is met: Both of the following conditions continue for at least 1.2 seconds. · The IG1...
- C1422When the stop light switch is off, the PM/C1 terminal voltage is 0.86 V or higher for 5 seconds or more.
- C1422When the stop light switch is off, the PM/C1 terminal voltage is 0.86 V or higher for 5 seconds or more.
- C1423Both of the following conditions continue for at least 5 seconds · The stop light switch is off. · The PM/C1...
- C1424One of the following conditions is met: · Noise occurs in the signal from the PM/C1 terminal 7 times or more...
- C1425When the IG1 terminal voltage is 9.5 V or more, the skid control ECU detects an open in the STP circuit for 3...
- C1425When the IG1 terminal voltage is between 9.5 and 17.4 V, an open in the STP terminal circuit continues for 3...
- C1452After braking, the fluid pressure inside the accumulator is less than the threshold within 3.2 seconds.
- C1452After braking, the fluid pressure inside the accumulator is less than the threshold within 3.2 seconds.
- C1453With the ECU terminal IG1 voltage at 10 to 14 V, an open in the brake fluid level warning switch circuit...
- C1453With the ECU terminal IG1 voltage at 10 to 14 V, an open in the brake fluid level warning switch circuit...
- C1454The fluid level of the reservoir is below the LOW level for 40 seconds after the ignition switch is turned to...
- C1454The fluid level of the reservoir is below the LOW level for 40 seconds after the ignition switch is turned to...
- C1468An open or short circuit in the SFRH or SFRR circuit continues for 0.05 seconds or more.
- C1468An open or short circuit in the SFRH or SFRR circuit continues for 0.05 seconds or more.
- C1469An open or short circuit in the SFLH or SFLR circuit continues for 0.05 seconds or more.
- C1469An open or short circuit in the SFLH or SFLR circuit continues for 0.05 seconds or more.
- C146AAn open or short circuit in the SRRH or SRRR circuit continues for 0.05 seconds or more.
- C146AAn open or short circuit in the SRRH or SRRR circuit continues for 0.05 seconds or more.
- C146BAn open or short circuit in the SRLH or SRLR circuit continues for 0.05 seconds or more.
- C146BAn open or short circuit in the SRLH or SRLR circuit continues for 0.05 seconds or more.
- C146EEither condition is met: 1. Both of the following conditions continue for at least 0.2 seconds. (a) IG...
- C146EEither condition is met: 1. Both of the following conditions continue for at least 0.2 seconds. (a) IG...
- C146FThe following condition continues for at least 0.2 seconds. · The relay contact is closed immediately after...
- C146FThe following condition continues for at least 0.2 seconds. · The relay contact is closed immediately after...
- U0073Control Module Communication Bus OFF
- U0114Lost Communication with 4WD Control ECU
- C0200When any of the following conditions is detected: 1. At a vehicle speed of 10 km/h (6 mph) or more, the...
- C0205When any of the following conditions is detected: 1. At a vehicle speed of 10 km/h (6 mph) or more, the...
- C0210When any of the following conditions is detected: 1. At a vehicle speed of 10 km/h (6 mph) or more, the...
- C0215When any of the following conditions is detected: 1. At a vehicle speed of 10 km/h (6 mph) or more, the...
- C0226An open or short circuit in the SFRH or SFRR circuitcontinues for 0.05 seconds or more.
- C0236An open or short circuit in the SFLH or SFLR circuitcontinues for 0.05 seconds or more.
- C0246An open or short circuit in the SRRH or SRRR circuitcontinues for 0.05 seconds or more.
- C0256An open or short circuit in the SRLH or SRLR circuitcontinues for 0.05 seconds or more.
- C0278When either of the following conditions is detected: 1. Both of the following conditions continue for at...
- C0279The following condition continues for at least 0.2 seconds. · The relay contact is closed immediately after...
- C1201An engine control system malfunction signal continues for 1 second or more.
- C1201An engine control system malfunction signal continues for 1 second or more.
- C1202When either of the following conditions is detected: 1. The fluid level of the reservoir is LOW for 4...
- C1203The engine/drivetrain specification and/or destination information from the ECM does not match the skid...
- C1203The engine/drivetrain specification and/or destination information from the ECM does not match the skid...
- C120AThe system information is not stored in the skid control ECU.
- C120AThe system information is not stored in the skid control ECU.
- C1210Zero point calibration of the yaw rate sensor is incomplete.
- C1210Zero point calibration of the yaw rate sensor is incomplete.
- C1223The anti-lock brake system is abnormal.
- C1225An open or short circuit in the SMCF circuit continues for 0.05 seconds or more.
- C1225An open or short circuit in the SMCF circuit continues for 0.05 seconds or more.
- C1226An open or short circuit in the SREA circuit continues for 0.05 seconds or more.
- C1226An open or short circuit in the SREA circuit continues for 0.05 seconds or more.
- C1227An open or short circuit in the SREC circuit continues for 0.05 seconds or more.
- C1227An open or short circuit in the SREC circuit continues for 0.05 seconds or more.
- C1228An open or short circuit in the STR circuit continues for 0.05 seconds or more.
- C1228An open or short circuit in the STR circuit continues for 0.05 seconds or more.
- C1231When the ECU IG1 terminal voltage is 9.5 V or higher, the steering sensor malfunction signal is received.
- C1231When the ECU IG1 terminal voltage is 9.5 V or higher, the steering sensor malfunction signal is received.
- C1232At a vehicle speed of 10 km/h (6 mph) or more, either GL1 or GL2 (input signal) does not change for 30...
- C1232At a vehicle speed of 10 km/h (6 mph) or more, either GL1 or GL2 (input signal) does not change for 30...
- C1234A sensor malfunction signal is received from the yaw rate sensor.
- C1234A sensor malfunction signal is received from the yaw rate sensor.
- C1235Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1235Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1236Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1236Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1238Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1238Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1239Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1239Noise in the speed sensor signals occurs 75 times or more for 5 seconds when the vehicle speed is 20 km/h (12...
- C1241Either condition is met: 1. Both of the following conditions continue for at least 10 seconds. · The vehicle...
- C1241Either condition is met: 1. Both of the following conditions continue for at least 10 seconds. · The vehicle...
- C1242The vehicle speed is 3 km/h (2 mph) or more and the voltage at the ECU IG2 terminal remains below 6.5 V for...
- C1242The vehicle speed is 3 km/h (2 mph) or more and the voltage at the ECU IG2 terminal remains below 6.5 V for...
- C1243Output values of GL1 and GL2 do not change 16 times or more while vehicle speed decreases from 30 km/h (19...
- C1243Output values of GL1 and GL2 do not change 16 times or more while vehicle speed decreases from 30 km/h (19...
- C1244When either of the following conditions is detected: · Both of the following conditions continue for at least...
- C1245The following condition continues for at least 60 seconds. · The difference between the values calculated...
- C1245The following condition continues for at least 60 seconds. · The difference between the values calculated...
- C1246When any of the following conditions is detected: 1. All of the following conditions continue for at least 30...
- C1249The ECU terminal IG1 voltage is 9.5 to 17.0 V, ABS is not operating, and an open in the stop light switch...
- C1249The ECU terminal IG1 voltage is 9.5 to 17.0 V, ABS is not operating, and an open in the stop light switch...
- C1251There is an open in the motor system circuit (motor input circuit).
- C1251There is an open in the motor system circuit (motor input circuit).
- C1252The motor operates for 3 minutes or more.
- C1252The motor operates for 3 minutes or more.
- C1253There is a motor system circuit (motor input circuit) malfunction.
- C1253There is a motor system circuit (motor input circuit) malfunction.
- C1254There is an accumulator pressure sensor malfunction (the fluid pressure does not change when the pump...
- C1254There is an accumulator pressure sensor malfunction (the fluid pressure does not change when the pump...
- C1256The fluid pressure inside the accumulator is below the standard value.
- C1256The fluid pressure inside the accumulator is below the standard value.
- C1257There is an open in the motor system circuit (motor input circuit).
- C1257There is an open in the motor system circuit (motor input circuit).
- C1268The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via CAN...
- C1268The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via CAN...
- C1271Stored only during test mode.
- C1271Stored only during test mode.
- C1272Stored only during test mode.
- C1272Stored only during test mode.
- C1273Stored only during test mode.
- C1273Stored only during test mode.
- C1274Stored only during test mode.
- C1274Stored only during test mode.
- C1275Stored only during test mode.
- C1275Stored only during test mode.
- C1276Stored only during test mode.
- C1276Stored only during test mode.
- C1277Stored only during test mode.
- C1277Stored only during test mode.
- C1278Stored only during test mode.
- C1278Stored only during test mode.
- C1279Stored during test mode.
- C1279Stored during test mode.
- C1281Detected only during Test Mode
- C1281Detected only during Test Mode
- C1282Stored during test mode.
- C1282Stored during test mode.
- C1282Stored during test mode.
- C1289The VGRS system fail signal continues to be output for 1 second or more.
- C1289The VGRS system fail signal continues to be output for 1 second or more.
- C1290The steering angle sensor zero point calibration position vastly differs from the recorded value.
- C1290The steering sensor zero point calibration position vastly differs from the recorded value.
- C1336Zero point calibration of the acceleration sensor is incomplete.
- C1336Zero point calibration of the acceleration sensor is incomplete.
- C1337Either condition is met: · The diameter of the 2 front wheels and 2 rear wheels is different. · There is a...
- C1337Either condition is met: · The diameter of the 2 front wheels and 2 rear wheels is different. · There is a...
- C1340An open circuit is detected in the EXI circuit of the skid control ECU.
- C1340An open circuit is detected in the EXI circuit of the skid control ECU.
- C1379Stored only during test mode.
- C1379Stored only during test mode.
- C1380Either condition is met: 1. When the voltage at the IG1 terminal is between 11 and 14 V and the stop light...
- C1380Either condition is met: 1. When the voltage at the IG1 terminal is between 11 and 14 V and the stop light...
- C1381At a vehicle speed of more than 3 km/h (2 mph), the acceleration sensor power source malfunction signal is...
- C1381At a vehicle speed of more than 3 km/h (2 mph), the acceleration sensor power source malfunction signal is...
- C1401One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1401One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1402One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1402One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1403One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1403One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1404One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1404One of the following conditions is met: 1. At a vehicle speed of 10 km/h (6 mph) or more, the output voltage...
- C1405Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1405Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1406Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1406Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1407Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1407Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1408Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1408Either condition is met: 1. An open in the speed sensor signal circuit continues for 0.5 seconds or more. 2....
- C1409One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1409One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1410One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1410One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1411One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1411One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1412One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1412One of the following conditions is met: 1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph)...
- C1413One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1413One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1414One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1414One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1415One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1415One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1416One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1416One of the following conditions is met: 1. An open in the sensor signal circuit of a malfunctioning area...
- C1417The IG1 terminal voltage is 17.4 V or higher for 0.8 seconds or more.
- C1417The IG1 terminal voltage is 17.4 V or higher for 0.8 seconds or more.
- C1418When either of the following conditions is detected: · Both of the following conditions continue for at least...
- C1419A data malfunction signal is received from the acceleration sensor.
- C1419A data malfunction signal is received from the acceleration sensor.
- C1420After the difference between GL1 and GL2 becomes 0.6 G or more with the vehicle stationary, the difference...
- C1421Either condition is met: Both of the following conditions continue for at least 1.2 seconds. · The IG1...
- C1421Either condition is met: Both of the following conditions continue for at least 1.2 seconds. · The IG1...
- C1422When the stop light switch is off, the PM/C1 terminal voltage is 0.86 V or higher for 5 seconds or more.
- C1422When vehicle speed is 3 km/h (2 mph) or more and stop light switch is off, the PM/C1 terminal voltage is 0.86...
- C1423Both of the following conditions continue for at least 5 seconds · The stop light switch is off. · The PM/C1...
- C1423Both of the following conditions continue for at least 5 seconds · The stop light switch is off. · The PM/C1...
- C1424One of the following conditions is met: · Noise occurs in the signal from the PM/C1 terminal 7 times or more...
- C1424One of the following conditions is met: · Noise occurs in the signal from the PM/C1 terminal 7 times or more...
- C1425When the IG1 terminal voltage is 9.5 V or more, the skid control ECU detects an open in the STP circuit for 3...
- C1425When the IG1 terminal voltage is between 9.5 and 17.4 V and the skid control ECU STPO terminal output is off,...
- C1426When both of the following conditions are met: · After the vehicle reaches 35 km/h or more, the PMC terminal...
- C1432A steering sensor power supply malfunction signal is received from the steering sensor.
- C1432A steering sensor power supply malfunction signal is received from the steering sensor.
- C1433Either condition is met: 1. With the IG1 terminal voltage 9.5 to 17.4 V, the skid control ECU receives an...
- C1433Either condition is met: 1. With the IG1 terminal voltage 9.5 to 17.4 V, the skid control ECU receives an...
- C1434An error in communication between the skid control ECU and the steering sensor, or an abnormal steering...
- C1434An error in communication between the skid control ECU and the steering sensor, or an abnormal steering...
- C1435A data malfunction signal is received from the yaw rate sensor.
- C1435A data malfunction signal is received from the yaw rate sensor.
- C1436Either condition is met: 1. With the vehicle stationary, the yaw rate sensor assembly output value is not...
- C1437When the IG1 terminal voltage is 10 V or higher and the vehicle speed is 15 km/h (9 mph) or more, data cannot...
- C1437When the IG1 terminal voltage is 10 V or higher and the vehicle speed is 15 km/h (9 mph) or more, data cannot...
- C1439After the steering sensor zero point calibration is cleared due to, for example, fluctuations in the power...
- C1439After the steering sensor zero point calibration is cleared due to, for example, fluctuations in the power...
- C1440Driving at a steep bank angle
- C1440Driving at a steep bank angle
- C1442An invalid data signal is transmitted continuously from the acceleration sensor for 10 seconds or more.
- C1442An invalid data signal is transmitted continuously from the acceleration sensor for 10 seconds or more.
- C1443An invalid data signal is transmitted continuously from the yaw rate sensor for 10 seconds or more.
- C1443An invalid data signal is transmitted continuously from the yaw rate sensor for 10 seconds or more.
- C1445Steering sensor zero point calibration cannot be obtained when the vehicle is driven without a record of...
- C1445Steering sensor zero point calibration cannot be obtained when the vehicle is driven without a record of...
- C1447Due to the VGRS system calibration request, the steering sensor zero point value has been cleared..
- C1452After braking, the fluid pressure inside the accumulator is less than the threshold within 3.2 seconds.
- C1452After braking, the fluid pressure inside the accumulator is less than the threshold within 3.2 seconds.
- C1453With the ECU terminal IG1 voltage at 10 to 14 V, an open in the brake fluid level warning switch circuit...
- C1453With the ECU terminal IG1 voltage at 10 to 14 V, an open in the brake fluid level warning switch circuit...
- C1454The fluid level of the reservoir is below the LOW level for 40 seconds after the ignition switch is turned to...
- C1454The fluid level of the reservoir is below the LOW level for 40 seconds after the ignition switch is turned to...
- C1455The IG1 terminal voltage is 9.5 V or higher and the PCTRL terminal voltage is outside the range of 0.19 to...
- C1455The IG1 terminal voltage is 9.5 V or higher and the PCTRL terminal voltage is outside the range of 0.19 to...
- C1456When the stop light switch is off, the PCTRL terminal voltage is 0.86 V or higher for 5 seconds or more.
- C1456When vehicle speed is 3 km/h (2 mph) or more and stop light switch is off, the PCTRL terminal voltage is 0.86...
- C1457The PCTRL terminal voltage is below 0.3 V for 5 seconds.
- C1457The PCTRL terminal voltage is below 0.3 V for 5 seconds.
- C1458One of the following conditions is met: · When the vehicle speed is 10 km/h (6 mph) or more, noise occurs in...
- C1458One of the following conditions is met: · When the vehicle speed is 10 km/h (6 mph) or more, noise occurs in...
- C1468An open or short circuit in the SFRH or SFRR circuit continues for 0.05 seconds or more.
- C1469An open or short circuit in the SFLH or SFLR circuit continues for 0.05 seconds or more.
- C146AAn open or short circuit in the SRRH or SRRR circuit continues for 0.05 seconds or more.
- C146BAn open or short circuit in the SRLH or SRLR circuit continues for 0.05 seconds or more.
- C146EEither condition is met: 1. Both of the following conditions continue for at least 0.2 seconds. (a) IG...
- C146FThe following condition continues for at least 0.2 seconds. · The relay contact is closed immediately after...
- U0073Control Module Communication Bus OFF
- U0073Control Module Communication Bus OFF
- U0100Lost Communication with ECM / PCM
- U0100Lost Communication with ECM / PCM
- U0114Lost Communication with 4WD Control ECU
- U0114Lost Communication with 4WD Control ECU
- U0123Lost Communication with Yaw Rate Sensor Module
- U0124Lost Communication with Lateral Acceleration Sensor Module
- U0124Lost Communication with Lateral Acceleration Sensor Module
- U0126Lost Communication with Steering Angle Sensor Module
- U0126Lost Communication with Steering Angle Sensor Module
- U0130Lost Communication with Steering Effort Control Module
- U0130Lost Communication with Steering Effort Control Module
- C1541An abnormal vehicle speed signal is received.
- C1544An abnormal engine speed signal is received.
- C15F0A short or open in the solenoid valve circuit.
- C15F1An abnormal steering angle signal is received.
- C15F2An abnormal VGRS relative angle signal is received.
- U0100The engine speed signal is lost.
- U0126The steering angle signal is lost.
- U0129The vehicle speed signal is lost.
- U0130The VGRS relative angle signal is lost.
- C1541An abnormal vehicle speed signal is received.
- C1544An abnormal engine speed signal is received.
- C15F0A short or open in the solenoid valve circuit.
- C15F1An abnormal steering angle signal is received.
- C15F2An abnormal VGRS relative angle signal is received.
- U0100The engine speed signal is lost.
- U0126The steering angle signal is lost.
- U0129The vehicle speed signal is lost.
- U0130The VGRS relative angle signal is lost.
- C1591/51 Actuator angle neutral calibration has not been performed.
- C1591/51 The steering control ECU detects that steering angle adjustment is incomplete.
- C1592/52 The VGRS ECU (steering control ECU) detects that steering actuator angle neutral point calibration is...
- C1592/52 The steering control ECU detects that steering actuator angle neutral position calibration is incomplete...
- C1593/53 Lock holder deviation is detected when the neutral point calibration value is calculated during actuator...
- C1593/53 The steering control ECU detects a steering actuator standard position error.
- C1595/55 The steering control ECU detects an error in serial communication between the ECU and steering angle sensor.
- C1595/55 With the engine switch on (IG) and a power source voltage of 10 V or more, serial communication from the...
- C15A1/61 Either condition is met: · After the engine switch is turned on (IG), a short in the motor circuit or an...
- C15A1/61 Excessive current (exceeding the estimated amount) flows due to a malfunction in the motor drive circuit.
- C15A2/62 Either condition is met: · After the engine switch is turned on (IG), an open in the motor circuit or an...
- C15A2/62 The VGRS system detects a malfunction in the motor drive circuit.
- C15A3/63 All conditions are met for approximately 0.03 seconds or more: · 2 seconds or more elapse after turning the...
- C15A3/63 The steering control ECU detects a malfunction in the rotation angle sensor circuit.
- C15A4/64 After starting the engine, the "Actuator Target Angle" and "Actuator Angle" have a difference of 0.5 degrees...
- C15A4/64 The steering control ECU detects that the difference between the actuator target angle and the actuator...
- C15A5/65 Both conditions are met for approximately 0.025 seconds or more: · The engine switch is on (IG). · A short in...
- C15A5/65 The steering control ECU detects that the LG terminal voltage is abnormal.
- C15A6/62 Either condition is met: · After the engine switch is turned on (IG), an open in the motor circuit or an...
- C15A6/62 The actual motor current value greatly differs from the estimated value.
- C15A9/66 After the engine switch is turned off, the lock pin is inserted with the steering wheel near the neutral...
- C15A9/66 The steering control ECU detects that the lock pin is not aligned with the lock holder correctly.
- C15AA/66 After starting the engine, the "Motor q Axis Target Voltage" is 1.8 V or higher and 15 seconds or more...
- C15AA/66 The steering control ECU cannot operate because the actuator lock cannot be released.
- C15AB/66 After the engine switch is turned on (IG), when the motor is operating to confirm the lock pin insertion, the...
- C15AB/66 The steering control ECU detects that the lock pin cannot be inserted into the lock holder.
- C15B1/71 The steering control ECU detects an internal malfunction.
- C15B1/71 When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction.
- C15B2/72 The steering control ECU detects an internal malfunction.
- C15B2/72 When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects a malfunction in the...
- C15B3/73 The steering control ECU detects an internal temperature error.
- C15B3/73 When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction.
- C15B4/71 The memorized actuator angle value cannot be confirmed immediately after the engine switch is turned on (IG).
- C15B4/71 The steering control ECU detects an internal malfunction.
- C15B5/82 When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction.
- C15B6/83 When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction.
- C15C1/74 All conditions are met for approximately 3 seconds or more: · 1 seconds or more after the engine switch is...
- C15C1/74 The steering control ECU receives a steering angle sensor malfunction signal via CAN communication.
- C15C2/74 All conditions are met for approximately 2 seconds or more: · 1 seconds or more after the engine switch is...
- C15C2/74 The steering control ECU receives a B+ open circuit signal from the steering angle sensor via CAN...
- C15C3/75 All conditions are met: · 3 seconds or more after the engine switch is turned on (IG). · Power source voltage...
- C15C3/75 The steering control ECU receives a vehicle speed error signal via CAN communication.
- C15C4/68 A steering signal indicating a tire angle of 36° or more (to the left or right) is input after entering test...
- C15C4/68 The system enters test mode.
- C15C5/69 A steering signal indicating a motor rotation angle of 36° or more (to the left or right) is input after...
- C15C5/69 The system enters test mode.
- C15C6/77 Both conditions are met for approximately 3 seconds or more: · The engine switch is on (IG). · When the...
- C15C6/77 The steering control ECU detects that the battery voltage is normal and the IG terminal voltage is below 4 V...
- C15C7/78 Both conditions are met for approximately 2.4 seconds or more: · The engine switch is on (IG). · When the PIG...
- C15C7/78 The steering control ECU detects that the IG terminal voltage is between 9 and 16 V, and the PIG terminal...
- C15C8/79 All conditions are met for approximately 1.5 seconds or more: · The engine switch is on (IG). · Control has...
- C15C8/79 The steering control ECU detects a malfunction in the power source relay or an open circuit.
- C15CB/84 All conditions are met: · 3 seconds or more after the engine switch is turned on (IG). · Power source voltage...
- U0100/56 Both conditions are met for approximately 3 seconds or more: · The engine switch is on (IG). · The signal...
- U0100/56 The steering control ECU detects an error in reception (from ECM) via CAN communication.
- U0101/56 Both conditions are met for approximately 12 seconds or more: · The engine switch is on (IG). · The signal...
- U0122/56 The steering control ECU detects an error in reception (from skid control ECU) via CAN communication.
- U0125/56 Both conditions are met for approximately 12 seconds or more: · The engine switch is on (IG). · The signal...
- U0126/56 Both conditions are met for approximately 3 seconds or more: · The engine switch is on (IG). · The signal...
- U0126/56 The steering control ECU detects an error in reception (from steering angle sensor) via CAN communication.
- U0129/56 Both conditions are met for approximately 3 seconds or more: · The engine switch is on (IG). · The signal...
- B2602Both of the following conditions continue: · The key code confirmation signal is off. · The engine switch is...
- B2603When operating the tilt and telescopic manual switch, an abnormal voltage value is input to the multiplex...
- B2603When operating the tilt and telescopic switch, an abnormal voltage value is sent to the multiplex tilt and...
- B2606IG signals and/or key code confirmation signals are not received correctly.
- B2610The tilt operation stops within the operation range while operating.
- B2610Tilt operation stops within the operation range while operating.
- B2611Telescopic operation stops within the operation range while operating.
- B2611The telescopic operation stops within the operation range while operating.
- B2620The ECU power source voltage drops to 8 V or less and this condition continues for 10 sec. or more.
- B2620The voltage of the ECU power source drops to 8 V or less and this condition continues for 10 secs. or more.
- B2621The periodic signal from a specified ECU has stopped.
- B2624· The auto away function is disabled with the last vehicle speed signal* at 10 km/h (6 mph) or more. ·...
- B2624· The auto away function is disabled with the last vehicle speed signal* of 10 km/h (6 mph) or more. · The...
- U0142Either condition is met: · The memory data signal received from the main body ECU (multiplex network body...
- U0208The memory and recall request signals from the front power seat switch LH*1 or RH*2 are lost for 10 seconds...
- B2781One of the following conditions is met (1-trip detection logic*1): · The steering lock/unlock position sensor...
- B2781When either condition below is met: · Steering lock motor drive power circuit malfunction · Lock and unlock...
- B2782Either condition is met (1-trip detection logic*): · The steering lock motor activation command circuit has a...
- B2782IGE power supply circuit malfunction
- B2788Mismatch between the steering lock ECU (steering lock actuator assembly) IG2 input from the LIN communication...
- B2788Open or short in IG2 signal circuit
- B1324After the radio and display receiver assembly receives a registration information signal, which is sent by...
- B1579Telephone microphone signal is lost.
- B1585Either condition is met. · Non mass-storage class or incompatible protocol USB device. · USB device with an...
- B158FA video or audio signal is interrupted when the battery voltage drops.
- B15A0When either of the conditions below is met: · Bus malfunction · EEPROM error
- B15A3Either condition is met: · International power supply malfunction. · DSP error. · EEPROM error.
- B15B0Picture circuit (TFT unit) malfunction
- B15B3When one of the conditions below is met: · AM tuner PLL is unlocked · FM tuner PLL is unlocked · Tuner...
- B15B4When one of the conditions below is met: · Mechanical communication error. · Lead malfunction. · Mechanical...
- B15B5When one of the conditions below is met: · Mechanical communication error. · Lead malfunction. · Mechanical...
- B15B7"Bluetooth" module malfunction.
- B15C0Navigation antenna error
- B15C1Error of the power source to the navigation antenna
- B15C3A short is detected in the speaker output circuit.
- B15C3A short is detected in the speaker output circuit.
- B15D3When either condition below is met: · The stereo component amplifier assembly is/was not connected while the...
- B15D8A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15F5Air conditioning amplifier assembly vehicle setting processing error.
- B15F6Main body ECU (multiplex network body ECU) vehicle setting processing error.
- B15F7Certification ECU (smart key ECU assembly) vehicle setting processing error.
- B15F8Front power seat switch LH*1 or RH*2 vehicle setting processing error.
- U0073CAN bus connection error
- U0100CAN reception error
- U0129CAN reception error
- U0140CAN reception error
- U0155CAN reception error
- U0164CAN reception error
- U1110CAN reception error
- B1550Digital radio tuner has a malfunction.
- B1575GVIF disconnected (from Multi-media module receiver assembly to multi-display assembly).
- B1579Telephone microphone signal is lost.
- B157DDAB Tuner Antenna disconnected.
- B1585USB Device Malfunction · Non mass-storage class or incompatible protocol USB device · USB device with an...
- B15A0When either condition below is met: · Bus malfunction · EEPROM error · Sub-microprocessor malfunction
- B15A3When one of the conditions below is met: · Internal power supply malfunction · DSP error · EEPROM error
- B15A6When one of the conditions below is met: · RAM error · Drawing controller malfunction · Internal hard drive...
- B15B0Picture circuit (TFT unit) malfunction
- B15B3Tuner communication error
- B15B5When one of the conditions below is met: · Mechanical communication error · Read malfunction · Mechanical...
- B15B7"Bluetooth" module malfunction
- B15B8Hard Disk Drive (HDD) malfunction
- B15C2A difference between the GPS speed and SPD pulse is detected
- B15C3A short is detected in the speaker output circuit.
- B15D0MOST network cannot be established.
- B15D3A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D6A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15E7Hard disk drive read/write error at low temperature.
- B15E8Hard disk drive read/write error at high temperature.
- B15F5Air conditioning amplifier assembly vehicle setting processing error.
- B15F6Main body ECU (cowl side junction block LH) vehicle setting processing error.
- B15F7Certification ECU (smart key ECU assembly) vehicle setting processing error.
- B15F9Multi-display for air conditioning switch operation signal input malfunction.
- U0073CAN bus connection error
- U0100CAN reception error
- U0126CAN reception error
- U0130CAN reception error
- U0140CAN reception error
- U0155CAN reception error
- U1110CAN reception error
- B1324After the multi-media module receiver assembly receives a registration information signal, which is sent by...
- B1550Digital radio tuner has a malfunction.
- B1575GVIF disconnected (from multi-media module receiver assembly to multi-display assembly)
- B1575GVIF disconnected (from multi-media module receiver assembly to multi-display assembly)
- B1579Telephone microphone signal is lost.
- B1579Telephone microphone signal is lost.
- B157DThe No. 2 amplifier antenna assembly is not connected
- B1585USB Device Malfunction · Non mass-storage class or incompatible protocol USB device · USB device with an...
- B158FA video or audio signal is interrupted when the battery voltage drops.
- B15A0When either condition below is met: · Bus malfunction · EEPROM error · Sub-microprocessor malfunction
- B15A3When one of the conditions below is met: · Internal power supply malfunction · DSP error · EEPROM error
- B15A6When one of the conditions below is met: · RAM error · Drawing controller malfunction · Internal hard drive...
- B15B0Picture circuit (TFT unit) malfunction
- B15B3Tuner communication error
- B15B5When one of the conditions below is met: · Mechanical communication error · Read malfunction · Mechanical...
- B15B7"Bluetooth" module malfunction
- B15B8Hard Disk Drive (HDD) malfunction
- B15C2A difference between the GPS speed and SPD pulse is detected
- B15C3A short is detected in the speaker output circuit.
- B15C3A short is detected in the speaker output circuit.
- B15D0MOST network cannot be established.
- B15D3A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D6A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15D8A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15E7Hard disk drive read/write error at low temperature.
- B15E8Hard disk drive read/write error at high temperature.
- B15F5Air conditioning amplifier assembly vehicle setting processing error.
- B15F6Main body ECU (cowl side junction block LH) vehicle setting processing error.
- B15F7Certification ECU (smart key ECU assembly) vehicle setting processing error.
- B15F8Front power seat switch vehicle setting processing error.
- U0073CAN bus connection error
- U0100CAN reception error
- U0126CAN reception error
- U0129CAN reception error
- U0130CAN reception error
- U0140CAN reception error
- U0155CAN reception error
- U0164CAN reception error
- U1110CAN reception error
- B1577GVIF disconnected (from multi-media module receiver assembly to multi-display controller sub-assembly)
- B15A5· Bus or sub-microprocessor malfunction · RAM malfunction · Internal hardware malfunction
- B15A5· Bus or sub-microprocessor malfunction. · EEPROM malfunction. · Internal hardware malfunction.
- B15B0When either condition below is met: · Picture circuit (TFT unit) malfunction · Back light malfunction (excess...
- B15CEEither condition is met: · The television display assembly is not connected while the engine switch is on...
- B15D5A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D5A device that is listed in the MOST network connected device record of the master unit is missing.
- B1324After the multi-media module receiver assembly receives a registration information signal, which is sent by...
- B1574GVIF disconnected (from Parking assist ECU to Multi-display)
- B1574GVIF disconnected (from Parking assist ECU to Multi-display)
- B1574GVIF disconnected (from Parking assist ECU to Multi-display)
- B1575GVIF disconnected (from Multi-media module receiver assembly to Multi-display assembly)
- B1575GVIF disconnected (from Multi-media module receiver assembly to multi-display assembly)
- B1575GVIF disconnected (from Multi-media module receiver assembly to multi-display assembly)
- B1579Telephone microphone signal is lost.
- B1579Telephone microphone signal is lost.
- B1579Telephone microphone signal is lost.
- B158CThe SD card cannot be mounted when inserted into the SD card slot.
- B158FA video or audio signal is interrupted when the battery voltage drops.
- B15A0When one of the conditions below is met: · Bus malfunction · Sub-microprocessor malfunction · EEPROM error
- B15A0When one of the conditions below is met: · Bus malfunction · Sub-microprocessor malfunction · EEPROM error
- B15A3When one of the conditions below is met: · Internal power supply malfunction · DSP error · EEPROM error
- B15A3When one of the conditions below is met: · Internal power supply malfunction · DSP error · EEPROM error
- B15A6When one of the conditions below is met: · RAM error · Drawing controller malfunction · Internal hard drive...
- B15A6When one of the conditions below is met: · RAM error · Drawing controller malfunction · Internal hard drive...
- B15ADWhen either of the conditions below is met: · A short to ground, short to +B or open occurs in the gyro...
- B15ADWhen either of the conditions below is met: · A short to ground, short to +B or open occurs in the gyro...
- B15B0Picture circuit (TFT unit) malfunction
- B15B0Picture circuit (TFT unit) malfunction
- B15B7When either of the conditions below is met: · Internal IC malfunction · Tuner malfunction
- B15B8Hard Disk Drive (HDD) malfunction
- B15B8Hard disc malfunction
- B15C0Navigation antenna error
- B15C0Navigation antenna error
- B15C0Navigation antenna error
- B15C1Error of the power source to the navigation antenna
- B15C1Error of the power source to the navigation antenna
- B15C1Error of the power source to the navigation antenna
- B15C2A difference between the GPS speed and SPD pulse is detected
- B15C2A difference between the GPS speed and SPD pulse is detected
- B15D0MOST network cannot be established.
- B15D0MOST network cannot be established.
- B15D3A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D3A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D5A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D5A device that is listed in the MOST network connected device record of the master unit is missing.
- B15D6A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15D6A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15D8A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15D8A device that is listed in the AVC-LAN connected device record of the master unit is missing.
- B15E5Electric throttle malfunction
- B15E5Electric throttle malfunction
- B15E7Hard disc read/write error at low temperature.
- B15E7Hard disk drive (HDD) read/write error at low temperature
- B15E8Hard disc read/write error at high temperature.
- B15E8Hard disk drive (HDD) read/write error at high temperature
- B15F5Air conditioning amplifier assembly vehicle setting processing error.
- B15F5Air conditioning amplifier assembly vehicle setting processing error.
- B15F6Main body ECU (cowl side junction block LH) vehicle setting processing error.
- B15F6Main body ECU (multiplex network body ECU) vehicle setting processing error.
- B15F7Certification ECU vehicle setting processing error.
- B15F7Certification ECU vehicle setting processing error.
- B15F9Multi-display for air conditioning switch operation signal input malfunction.
- C1610Park assist/monitoring error
- C1610Park assist/monitoring error
- U0073CAN bus connection error
- U0073CAN bus connection error
- U0100CAN reception error
- U0100CAN reception error
- U0126CAN reception error
- U0126CAN reception error
- U0129CAN reception error
- U0140CAN reception error
- U0140CAN reception error
- U0155CAN reception error
- U0155CAN reception error
- U0164CAN reception error
- U1110CAN reception error
- U1110CAN reception error
- B1570Red LED Error
- B1571Green LED Error
- B1572Microphone Error
- B1573Short in Telephone Antenna Circuit
- B1583GPS Signal Unreceived
- B15A8DCM Malfunction
- B15C0Short in GPS Antenna
- B15C1Open in GPS Antenna
- B15C4SRS Communication Error
- B15C5Emergency Switch Error (Open or Short)
- B15CBTelephone Antenna Disconnected
- B15CCBackup Battery Failure
- B15ECBackup Battery Degradation
- B15F0VIN Not Programmed or Mismatch - DCM
- U0100Engine ECU Communication
- C1AE1A malfunction of the No. 1 ultrasonic sensor (FL sensor).
- C1AE1A malfunction of the No. 1 ultrasonic sensor (front corner sensor LH).
- C1AE4A malfunction of the No. 1 ultrasonic sensor (FR sensor).
- C1AE4A malfunction of the No. 1 ultrasonic sensor (front corner sensor RH).
- C1AE6A malfunction of the No. 1 ultrasonic sensor (RL sensor).
- C1AE6A malfunction of the No. 2 ultrasonic sensor (rear corner sensor LH).
- C1AE7A malfunction of the No. 1 ultrasonic sensor (RLC sensor).
- C1AE7A malfunction of the No. 2 ultrasonic sensor (rear center sensor LH).
- C1AE8A malfunction of the No. 1 ultrasonic sensor (RRC sensor).
- C1AE8A malfunction of the No. 2 ultrasonic sensor (rear center sensor RH).
- C1AE9A malfunction of the No. 1 ultrasonic sensor (RR sensor).
- C1AE9A malfunction of the No. 2 ultrasonic sensor (rear corner sensor RH).
- C1AECAn open or short circuit in the communication line between the front sensors and ECU or a malfunction in a...
- C1AECAn open or short circuit in the communication line between the front sensors and ECU or a malfunction in a...
- C1AEDAn open or short circuit in the communication line between the rear sensors and ECU or a malfunction in a...
- C1AEDAn open or short circuit in the communication line between the rear sensors and ECU or a malfunction in a...
- C1AEFA problem with the shift position information.
- U0100Lost communication with ECM.
- U0101Lost communication with TCM.
- U0142Lost communication with main body ECU (multiplex network body ECU).
- U0155Lost communication with the Instrument Panel Cluster (IPC) control module.
- U0155Lost communication with the Instrument Panel Cluster (IPC) control module.
- C1622Back Camera Disconnected
- C1625Open or Short in Steering Angle Sensor +B
- C1626Steering Angle Sensor Failure
- C1649VGRS Failure
- C168DVehicle Information Unmatched
- C1691Back Camera Initialization Incomplete
- C1694Steering Angle Initialization Incomplete
- U0126Lost Communication with Steering Angle Sensor Module
- U0130Lost Communication with VGRS
- U0140Lost Communication with Body Control Module
- C1611· EEPROM Status (Initial read) · AISIC Output Status
- C1612· IG voltage is low · IG voltage is high
- C1613· ACC voltage is low · ACC voltage is high
- C1622An open or short in the rear television camera signal circuit
- C1625Open or short in steering angle sensor +B
- C1626A fail flag is transmitted from the steering angle sensor.
- C1649Steering Control ECU malfunction
- C168DVehicle Information Unmatched
- C1691Back camera initial setting has not been memorized
- C1694Maximum steering angle has not been memorized
- U0073Control module communication bus off
- U0100Lost communication with ECM
- U0114Lost Communication with 4WD Control ECU
- U0126Lost communication with steering angle sensor
- U0130Lost communication with VGRS
- U0140Lost communication with main body ECU
- C1622Open or short in the rear television camera assembly signal circuit
- C1625Open or short in steering angle sensor +B
- C1626A fail flag is transmitted from the steering angle sensor.
- C1649Steering Control ECU malfunction
- C168DVehicle Information Unmatched
- C1691Back camera initial setting has not been memorized
- C1694Maximum steering angle has not been memorized
- U0126Lost communication with steering angle sensor
- U0129Lost communication with brake system control module
- U0130Lost communication with steering effect control module
- U0140Lost communication with body control module
- C1681Front television camera power supply failure
- C1682An open or short in the front television camera signal circuit
- C1683Side Camera Feedback Malfunction
- C1684Side Camera Current Malfunction
- C1686Side Camera Feedback Malfunction
- C1687Side Camera Current Malfunction
- C1693Side camera initial setting has not been memorized
- C1A45A fail flag is transmitted from the brake actuator assembly (skid control ECU).
- C1A46A fail flag is transmitted from the yaw rate and acceleration sensor
- C1A47A fail flag is transmitted from the steering sensor
- C1AB0Both of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AB1Both of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AB2Both of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AB3Both of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AB4Both of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AB5Both of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AB6The blind spot monitor sensor LH (master) detects an internal malfunction.
- C1AB7The blind spot monitor sensor RH (slave) detects an internal malfunction.
- C1AB8The blind spot monitor sensor cannot communicate with the main body ECU (multiplex network body ECU).
- C1ABBA beam axis adjustment has not been performed
- C1ABCA beam axis adjustment has not been performed
- C1ABDBoth of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1ABEBoth of the following conditions are met: · The blind spot monitor main switch (steering pad switch assembly...
- C1AC1When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is...
- C1AC1When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is...
- C1AC2When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is...
- C1AC2When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is...
- U0100Lost communication with ECM
- U0125Lost communication with airbag sensor assembly
- U0126Lost communication with steering sensor
- U0129Lost communication with electronically controlled brake system
- U0142Lost communication with main body ECU (multiplex network body ECU)
- U0163Lost communication with multi-media module receiver assembly
- U0232The blind spot monitor sensor LH cannot receive signals from the blind spot monitor sensor RH.
- U1331Destination information of the main body ECU (multiplex network body ECU) and blind spot monitor sensor do...
- C1611· EEPROM Status (Initial read) · AISIC Output Status
- C1612· IG voltage is low · IG voltage is high
- C1613· ACC voltage is low · ACC voltage is high
- C1621An open or short in the rear television camera signal circuit
- C1622An open or short in the rear television camera signal circuit
- C1625Open or short in steering angle sensor +B
- C1626A fail flag is transmitted from the steering angle sensor.
- C1647G sensor malfunction.
- C1649Variable gear ratio steering system malfunction
- C164DWheel speed sensor malfunction.
- C1681Front television camera power supply failure
- C1682An open or short in the front television camera signal circuit
- C1683Side Camera Feedback Malfunction
- C1684Side Camera Current Malfunction
- C1686Side Camera Feedback Malfunction
- C1687Side Camera Current Malfunction
- C168DVehicle Information Unmatched
- C1694Maximum steering angle has not been memorized
- C1697Camera initial setting has not been memorized
- C2A60Front television camera assembly malfunction
- C2A61Side television camera assembly LH malfunction
- C2A62Slide television camera assembly RH malfunction
- C2A63Rear television camera assembly malfunction
- C2A6AAbnormal response from the rear television camera assembly
- C2A6BAbnormal response from the side television camera assembly LH
- C2A6CAbnormal response from the side television camera assembly RH
- C2A6DAbnormal response from the front television camera assembly
- U0073Control module communication bus off
- U0100Lost communication with ECM
- U0114Lost communication with 4WD Control ECU
- U0124U0124
- U0126Lost communication with steering angle sensor
- U0129Lost communication with brake actuator assembly (skid control ECU)
- U0130Lost communication with VGRS
- U0140Lost communication with main body ECU
- U0233Lost communication with blind spot monitor sensor LH
- U023BDetect the send abnormality on the local bus
- U0265Lost Communication with rear television camera assembly
- U0266Lost Communication with side television camera assembly LH
- U0267Lost Communication with front television camera assembly
- U0268Lost Communication with side television camera assembly RH
- U1000ECU malfunction
- U1110Lost communication with clearance warning ECU assembly
- B1206No communication between master switch and main body ECU (cowl side junction block LH) for 10 seconds or more.
- B1206No communication between multiplex network master switch assembly and main body ECU (multiplex network body...
- B1249No communication from the double door lock relay assembly for more than 10 seconds.
- B1249No communication from the double door lock relay for more than 10 seconds.
- B1273No communication between the sliding roof ECU and main body ECU (cowl side junction block LH) for 10 seconds...
- B1273No communication between the sliding roof ECU and main body ECU (multiplex network body ECU) for 10 seconds...
- B2287There is an open, short or ECU communication malfunction between the main body ECU (cowl side junction block...
- B2321No communication between the front power window regulator motor LH*1 or RH*2 and main body ECU (cowl side...
- B2321No communication between the front power window regulator motor LH*1 or RH*2 and main body ECU (multiplex...
- B2322No communication between the front power window regulator motor RH*1 or LH*2 and main body ECU (cowl side...
- B2322No communication between the front power window regulator motor RH*1 or LH*2 and main body ECU (multiplex...
- B2323No communication between the rear power window regulator motor RH and main body ECU (cowl side junction block...
- B2323No communication between the rear power window regulator motor RH and main body ECU (multiplex network body...
- B2324No communication between the rear power window regulator motor LH and main body ECU (cowl side junction block...
- B2324No communication between the rear power window regulator motor LH and main body ECU (multiplex network body...
- B2325The main body ECU (cowl side junction block LH) detects a malfunction in the LIN communication bus between...
- B2325The main body ECU (multiplex network body ECU) detects a malfunction in the LIN communication bus between...
- B2785The certification ECU (smart key ECU assembly) detects a malfunction in the LIN communication bus between...
- B2785The certification ECU (smart key ECU assembly) detects a malfunction in the LIN communication bus between...
- B2786Periodic transmission from the steering lock ECU stops for 10 seconds or more.
- B2786Periodic transmission from the steering lock ECU stops for 10 seconds or more.
- B2789No communication between the certification ECU (smart key ECU assembly) and ID code box (immobiliser code...
- B2789No communication between the certification ECU (smart key ECU assembly) and ID code box (immobiliser code...
- B2621Periodic signal from the specified ECU has stopped.
- B2624· The auto away function is disabled with the last vehicle speed signal* at 10 km/h (6 mph) or more. ·...
- B2779There is no communication from the accessory bus buffer
- U0104There is no communication from the distance control ECU assembly.
- U0114/38 There is no communication from the 4WD control ECU.
- U0124There is no communication from the yaw rate sensor assembly (lateral acceleration sensor).
- U0125There is no communication from the yaw rate sensor assembly.
- U0126There is no communication from the steering angle sensor.
- U0127There is no communication from the tire pressure warning ECU and receiver.
- U0129There is no communication from the master cylinder solenoid (skid control ECU).
- U0130There is no communication from the steering control ECU.
- U0131There is no communication from the power steering ECU assembly.
- U0132There is no communication from the suspension control ECU.
- U0141There is no communication from the No. 2 main body ECU.
- U0199There is no communication from the outer mirror control ECU assembly.
- U0208There is no communication from the position control ECU and switch.
- U0230There is no communication from the power back door unit assembly (power back door ECU).
- U0327There is no communication from the certification ECU (smart key ECU assembly).
- U1002(CAN MS BUS)
- U1002(CAN No. 2 BUS)
- U1100There is no communication from the seat belt control ECU.
- U110BThere is no communication from the parking assist ECU.
- U1110There is no communication from the clearance warning ECU assembly.
- U1111There is no communication from the windshield wiper ECU.
- U1115There is no communication from the multiplex tilt and telescopic ECU.
- U1117There is no communication from the accessory bus buffer
- U0104There is no communication from the distance control ECU assembly.
- U0114/38 There is no communication from the 4WD control ECU.
- U0124There is no communication from the yaw rate sensor assembly (lateral acceleration sensor).
- U0125There is no communication from the yaw rate sensor assembly.
- U0126There is no communication from the steering angle sensor.
- U0127There is no communication from the tire pressure warning ECU.
- U0129There is no communication from the master cylinder solenoid (skid control ECU).
- U0130There is no communication from the steering control ECU.
- U0131There is no communication from the power steering ECU assembly.
- U0132There is no communication from the suspension control ECU.
- U0141There is no communication from the No. 2 main body ECU.
- U0199There is no communication from the outer mirror control ECU.
- U0208There is no communication from the position control ECU and switch.
- U0230There is no communication from the power back door unit assembly (power back door ECU).
- U0327There is no communication from the certification ECU (smart key ECU assembly).
- U1002(CAN MS BUS)
- U1002(CAN No. 2 BUS)
- U1100There is no communication from the seat belt control ECU.
- U110BThere is no communication from the parking assist ECU.
- U1110There is no communication from the clearance warning ECU assembly.
- U1111There is no communication from the windshield wiper ECU.
- U1115There is no communication from the multiplex tilt and telescopic ECU.
- B1003The central gateway ECU detects an internal malfunction.
- B1003The central gateway ECU detects an internal malfunction.
- U0141There is no communication from the No. 2 main body ECU.
- U0141There is no communication from the No. 2 main body ECU.
- U0141There is no communication from the No. 2 main body ECU.
- U0141There is no communication from the No. 2 main body ECU.
- U0199There is no communication from the outer mirror control ECU assembly LH.
- U0199There is no communication from the outer mirror control ECU assembly LH.
- U0199There is no communication from the outer mirror control ECU assembly RH.
- U0199There is no communication from the outer mirror control ECU assembly RH.
- U0200There is no communication from the outer mirror control ECU assembly LH.
- U0200There is no communication from the outer mirror control ECU assembly LH.
- U0200There is no communication from the outer mirror control ECU assembly RH.
- U0200There is no communication from the outer mirror control ECU assembly RH.
- U0208There is no communication from the power seat switch assembly.
- U0208There is no communication from the power seat switch assembly.
- U0208There is no communication from the power seat switch assembly.
- U0208There is no communication from the power seat switch assembly.
- U0230There is no communication from the power back door unit assembly (power back door ECU).
- U0230There is no communication from the power back door unit assembly (power back door ECU).
- U0230There is no communication from the power back door unit assembly (power back door ECU).
- U0230There is no communication from the power back door unit assembly (power back door ECU).
- U0235There is no communication from the millimeter wave radar sensor assembly.
- U0235There is no communication from the millimeter wave radar sensor assembly.
- U023AThere is no communication from the forward recognition camera.
- U023AThere is no communication from the forward recognition camera.
- U1002Driving support ECU assembly cannot receive signals from all ECUs that have been memorized as those connected...
- U1002Driving support ECU assembly cannot receive signals from all ECUs that have been memorized as those connected...
- U1002Main body ECU (multiplex network body ECU) cannot receive signals from all ECUs that have been memorized as...
- U1002Main body ECU (multiplex network body ECU) cannot receive signals from all ECUs that have been memorized as...
- U1002Main body ECU (multiplex network body ECU) cannot receive signals from all ECUs that have been memorized as...
- U1002Main body ECU (multiplex network body ECU) cannot receive signals from all ECUs that have been memorized as...
- U1115There is no communication from the multiplex tilt and telescopic ECU.
- U1115There is no communication from the multiplex tilt and telescopic ECU.
- U1115There is no communication from the multiplex tilt and telescopic ECU.
- U1115There is no communication from the multiplex tilt and telescopic ECU.
- B1242One of following conditions is met: · Short in RDA or RSSI to ground between the certification ECU (smart key...
- B1242· Short in RDAM to ground between the certification ECU (smart key ECU assembly) and door control receiver. ·...
- B1242The applicable RDA signal cannot be received within 1 second of the PRG signal being output from the main...
- B1242The applicable RDA signal cannot be received within 1 second of the PRG signal being output from the main...
- B2271The IG1 No. 3 relay actuation circuit or integration relay (IG2 relay) actuation circuit inside the main body...
- B2271When either of the following conditions is met (1-trip detection logic*1): · The IG circuit in the...
- B2272The IG1 No. 3 relay actuation circuit inside the main body ECU or other related circuit is malfunctioning.
- B2273The integration relay (IG2 relay) actuation circuit inside the main body ECU or other related circuit is...
- B2274Malfunction in the ACC relay circuit in the certification ECU (smart key ECU assembly) or in the external...
- B2274The ACC relay actuation circuit inside the main body ECU or other related circuit is malfunctioning.
- B2275The engine start request signal circuit inside the main body ECU or other related circuit is malfunctioning.
- B2276The ACCR output circuit inside the main body ECU or other related circuit is malfunctioning.
- B2277The submersion circuit monitor inside the main body ECU detects that the vehicle is submerged in water.
- B2277The water submersion detection circuit in the certification ECU (smart key ECU assembly) detects water...
- B2278Communication is abnormal between the main body ECU and engine switch or the engine switch is defective.
- B2281Communication or the communication line is abnormal between the main body ECU and shift lock control ECU.
- B2282The vehicle speed signal sent by the combination meter assembly via direct line and the vehicle speed signal...
- B2282When the following conditions are met: · Signals between the main body ECU and combination meter are...
- B2283Either of the following malfunctions is detected (a vehicle speed sensor malfunction is detected) (1-trip...
- B2283When both of the conditions below are met: · Vehicle speed decreases significantly. · Vehicle speed does not...
- B2284The brake signal sent via direct line and the brake signal sent via CAN communication (1-trip detection...
- B2284The brake signal sent via direct line and the brake signal sent via CAN communication (1-trip detection...
- B2284The circuit between the main body ECU and stop light switch, and the CAN communication signal between the...
- B2285The cable and LIN information between the main body ECU and steering lock ECU is inconsistent.
- B2285The steering lock position signal sent by the steering lock ECU (steering lock actuator assembly) via direct...
- B2286The cable and CAN information between the main body ECU and ECM is inconsistent.
- B2286The engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN...
- B2286The engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN...
- B2288After turning the engine switch from off to on (IG), the steering wheel does not unlock for a certain period...
- B2289When either of the following conditions is met: · Communication or the communication line is abnormal among...
- B27A1An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and front...
- B27A2An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and front...
- B27A3An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and rear...
- B27A4An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and rear...
- B27A5An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 1...
- B27A6An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 2...
- B27A7An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 3...
- B27A8An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and...
- P0335The engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN...
- P0335The engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN...
- U0100CAN communication error between the certification ECU (smart key ECU assembly) and ECM (1-trip detection*)
- U0140CAN communication error between the certification ECU (smart key ECU assembly) and main body ECU (1-trip...
- U0142CAN communication error between the certification ECU (smart key ECU assembly) and main body ECU (1-trip...
- U0155CAN communication error between the certification ECU (smart key ECU assembly) and combination meter assembly...
- U1117Data from the option connector (bus buffer ECU) cannot be received.
- B2779One of the following conditions is met (1 trip detection logic*): · A remote start communication error...
- B2784The antenna coil is open/shorted.
- B2784The transponder key amplifier coil built into the engine switch is open (see below) or shorted (determined by...
- B278AA short to GND in the power supply of the transponder key amplifier of the engine switch (VC5 - VC5)...
- B278AThe engine switch power source supply line is open or shorted.
- B2790An internal malfunction occurs in the ID code box (immobiliser code ECU) (EEPROM access malfunction). (1 trip...
- B2790The ID code box detects an internal malfunction.
- B2799Either condition is met (1 trip detection logic*): · A malfunction in the communication or communication...
- B2799Either condition is met (1 trip detection logic*): · A malfunction in the communication or communication...
- B2799One of following conditions is met: · Error in the communication between the ECM and the ID code box...
- B279AThe communication line (IMI - EFIO) between the ECM and ID code box (immobiliser code ECU) is stuck high (1...
- B279AThe communication line (IMI - EFIO) between the ECM and ID code box (immobiliser code ECU) is stuck high (1...
- B279AWhen the communication line (EFIO-IMI) between the ECM and the ID code box (immobiliser code ECU) is stuck on...
- B279CAn ECM that is incompatible with the engine immobiliser system is installed. (1-trip detection logic*)
- B279CWhen an ECM that is incompatible with the engine immobiliser system is installed.
- B2780The unlock warning switch assembly is not detected as being on when the ignition switch is ON (1 trip...
- B2780The unlock warning switch assembly is not detected as being on when the ignition switch is ON (1 trip...
- B2784The antenna coil built into the transponder key amplifier is open or shorted (determined by communication...
- B2784The antenna coil in the transponder key coil is open/shorted.
- B2793A transponder chip malfunction (1 trip detection logic*).
- B2793A transponder chip malfunction (1 trip detection logic*).
- B2794A key with an incomplete key ID code is inserted into the ignition key cylinder (1 trip detection logic*).
- B2794A key with an incomplete key code is inserted into the ignition key cylinder (1 trip detection logic*).
- B2795A key with a different vehicle serial number is inserted into the ignition key cylinder (1 trip detection...
- B2795A key with a different vehicle serial number is inserted into the ignition key cylinder (1 trip detection...
- B2796The key ID code cannot be transmitted to the transponder key ECU assembly (1 trip detection logic*).
- B2796The key code cannot be transmitted (1 trip detection logic*).
- B2797A key with a BCC malfunction is inserted into the ignition key cylinder (1 trip detection logic*).
- B2797A key with a Bcc malfunction is inserted into the ignition key cylinder (1 trip detection logic*).
- B2798Key ID code identification cannot be completed within the specified time (1 trip detection logic*).
- B2798Key code identification cannot be completed within the specified time (1 trip detection logic*).
- B2799Either condition is met (1 trip detection logic*3): · A malfunction occurs in the communication or...
- B2799One of the following conditions is met: · Error in communication between ECM and transponder key ECU...
- B279ACommunication line (EFIO-IMI) between the ECM and transponder key ECU assembly is stuck high.
- B279AThe communication line (IMI - EFIO) between the ECM and transponder key ECU assembly is stuck on HI output (1...
- B279CAn ECM that is incompatible with immobiliser system is installed.
- B279CAn ECM that is incompatible with the engine immobiliser system is installed (1 trip detection logic*).
- B2761Intrusion and tilt sensor (theft warning ultrasonic sensor) outputs signal for sensor malfunction
- B2761Intrusion sensor (theft warning ultrasonic sensor) outputs signal for sensor malfunction
- B2761Intrusion sensor outputs signal for sensor malfunction
- B2762After normal/trouble signal is output from intrusion and tilt sensor (theft warning ultrasonic sensor) as...
- B2762After normal/trouble signal is output from intrusion sensor (theft warning ultrasonic sensor) as result of...
- B2762After normal/trouble signal is output from intrusion sensor as result of self-diagnosis, following...
- B2764After normal/trouble signal is output from intrusion and tilt sensor (theft warning ultrasonic sensor) as...
- B2764After normal/trouble signal is output from intrusion sensor (theft warning ultrasonic sensor) as result of...
- B2764After normal/trouble signal is output from intrusion sensor as result of self-diagnosis, following...
- B2768If one of the following is detected: · A yaw rate sensor power supply malfunction. · A yaw rate sensor open...
- B2768If one of the following is detected: · Theft warning tilt sensor (yaw rate sensor) power supply malfunction ·...
- B2769After a normal/trouble signal is output from the yaw rate sensor as the result of self-diagnosis, either of...
- B2769If one of the following is detected: · Theft warning tilt sensor (yaw rate sensor) power supply malfunction ·...
- B276AAfter normal/trouble signal is output from the yaw rate sensor as result of self-diagnosis, the following...
- B276ATerminal CSIF of theft warning tilt sensor (yaw rate sensor) has not received signal for 5 seconds or more
- B1500When the combination meter detects a fuel sender gauge malfunction.
- B1500When the combination meter detects a fuel sender gauge malfunction.
- B1501When the combination meter detects a fuel sender gauge malfunction.
- B1501When the combination meter detects a fuel sender gauge malfunction.
- B1507When IG voltage is 9.5 V or more and the following condition is detected: · Open in turn signal light circuit
- B1508When IG voltage is 9.5 V or more and the following condition is detected: · Short in turn signal light...
- B150AAfter the combination meter assembly receives a registration information signal, which is sent by the...
- U0100When the vehicle speed is 5 km/h (3 mph) or more and IG voltage is 10.5 V or more while no communication with...
- U0100· IG voltage is 9.5 V to 11.5 V. · No communication with the ECM continues for 2 seconds or more.
- U0129When 15 seconds have elapsed after the engine is started and IG voltage is 10.5 V or more while no...
- U0129· IG voltage is 9.5 V to 11.5 V. · No communication with the hydraulic brake booster (skid control ECU)...
- U0130· IG voltage is 9.5 V to 11.5 V. · No communication with the power steering control ECU continues for 3...
- U0142· IG voltage is 9.5 V to 11.5 V. · No communication with the main body ECU (multiplex network body ECU)...
- U0151· IG voltage is 9.5 V to 11.5 V. · No communication with the airbag ECU continues for 10 seconds or more.
- U0163· IG voltage is 9.5 V to 11.5 V. · No communication with the multi-media module receiver assembly continues...
- U0182· IG voltage is 9.5 V to 11.5 V. · No communication with the headlight swivel ECU assembly continues for 10...
- U023A· IG voltage is 9.5 V to 11.5 V. · No communication with the forward recognition camera continues for 10...
- U1104· IG voltage is 9.5 V to 11.5 V. · No communication with the driving support ECU continues for 10 seconds or...
- B1000/31 A center airbag sensor malfunction.
- B1000/31 A center airbag sensor malfunction.
- B1610/13 When one of the following conditions is met: · A front airbag sensor RH malfunction. · A center airbag sensor...
- B1610/13 When one of the following conditions is met: · A front airbag sensor RH malfunction. · A center airbag sensor...
- B1612/83 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1612/83 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1613/83 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1613/83 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1615/14 When one of the following conditions is met: · A front airbag sensor LH malfunction. · A center airbag sensor...
- B1615/14 When one of the following conditions is met: · A front airbag sensor LH malfunction. · A center airbag sensor...
- B1617/84 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1617/84 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1618/84 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1618/84 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B161A/8A One of the following conditions is met: · The center airbag sensor assembly detects a line short circuit...
- B161A/8A One of the following conditions is met: · The center airbag sensor assembly detects a line short circuit...
- B1630/23 When one of the following conditions is met: · A rear airbag sensor RH malfunction. · A center airbag sensor...
- B1630/23 When one of the following conditions is met: · A rear airbag sensor RH malfunction. · A center airbag sensor...
- B1632/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1632/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1633/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1633/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1635/24 When one of the following conditions is met: · A side airbag sensor LH malfunction. · A center airbag sensor...
- B1635/24 When one of the following conditions is met: · A side airbag sensor LH malfunction. · A center airbag sensor...
- B1637/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1637/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1638/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1638/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1642/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1642/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1647/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1647/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1651/33 When all the conditions below are met: · The center airbag sensor receives a line short circuit signal, an...
- B1651/33 When all the conditions below are met: · The center airbag sensor receives a line short circuit signal, an...
- B1653/35 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1653/35 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1655/37 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1655/37 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1656/38 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1656/38 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1660/43 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal, a...
- B1660/43 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal, a...
- B1661/44 When one of the following conditions is met: · The center airbag sensor receives an open signal or short to...
- B1661/44 When one of the following conditions is met: · The center airbag sensor receives an open signal or short to...
- B1661/44 When one of the following conditions is met: · The center airbag sensor receives an open signal or short to...
- B1662/45 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal, a...
- B1675/18 When one of the following conditions is met: · A rear floor airbag sensor malfunction. · A center airbag...
- B1675/18 When one of the following conditions is met: · A rear floor airbag sensor malfunction. · A center airbag...
- B1676/85 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1676/85 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1677/85 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1677/85 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1690/15 When one of the following conditions is met: · A side airbag sensor RH malfunction. · A center airbag sensor...
- B1690/15 When one of the following conditions is met: · A side airbag sensor RH malfunction. · A center airbag sensor...
- B1692/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1692/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1693/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1693/81 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1695/16 When one of the following conditions is met: · A side airbag sensor LH malfunction. · A center airbag sensor...
- B1695/16 When one of the following conditions is met: · A side airbag sensor LH malfunction. · A center airbag sensor...
- B1697/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1697/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1698/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1698/82 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal,...
- B1800/51 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1800/51 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1801/51 When one of the following conditions is met: · The A center airbag sensor receives an open circuit signal in...
- B1801/51 When one of the following conditions is met: · The A center airbag sensor receives an open circuit signal in...
- B1802/51 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1802/51 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1803/51 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1803/51 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1805/52 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1805/52 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1806/52 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1806/52 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1807/52 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1807/52 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1808/52 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1808/52 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1810/53 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1810/53 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1811/53 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1811/53 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1812/53 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1812/53 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1813/53 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1813/53 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1815/54 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1815/54 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1816/54 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1816/54 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1817/54 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1817/54 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1818/54 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1818/54 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1820/55 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1820/55 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1821/55 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1821/55 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1822/55 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1822/55 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1823/55 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1823/55 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1825/56 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1825/56 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1826/56 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1826/56 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1827/56 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1827/56 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1828/56 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1828/56 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1830/57 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1830/57 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1831/57 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1831/57 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1832/57 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1832/57 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1833/57 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1833/57 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1835/58 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1835/58 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1836/58 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1836/58 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1837/58 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1837/58 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1838/58 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1838/58 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1840/59 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1840/59 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1841/59 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1841/59 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1842/59 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1842/59 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1843/59 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1843/59 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1845/61 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1845/61 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1846/61 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1846/61 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1847/61 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1847/61 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1848/61 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1848/61 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1850/62 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1850/62 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1851/62 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1851/62 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1852/62 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1852/62 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1853/62 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1853/62 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1855/63 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1855/63 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1856/63 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1856/63 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1857/63 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1857/63 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1858/63 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1858/63 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1860/64 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1860/64 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1861/64 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1861/64 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1862/64 When one of the following conditions is met: · The airbag sensor center receives a short circuit to ground...
- B1862/64 When one of the following conditions is met: · The airbag sensor center receives a short circuit to ground...
- B1863/64 When one of the following conditions is met: · The airbag sensor center receives a short circuit to B+ signal...
- B1863/64 When one of the following conditions is met: · The airbag sensor center receives a short circuit to B+ signal...
- B1865/65 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1865/65 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1866/65 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1866/65 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1867/65 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1867/65 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1868/65 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1868/65 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1900/73 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1900/73 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1901/73 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1901/73 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1902/73 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1902/73 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1903/73 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1903/73 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1905/74 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1905/74 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1906/74 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1906/74 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1907/74 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1907/74 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1908/74 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1908/74 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1920/77 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1920/77 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1921/77 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1921/77 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1922/77 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1922/77 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1923/77 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1923/77 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1925/78 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1925/78 When one of the following conditions is met: · The center airbag sensor receives a line short circuit signal...
- B1926/78 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1926/78 When one of the following conditions is met: · The center airbag sensor receives an open circuit signal in...
- B1927/78 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1927/78 When one of the following conditions is met: · The center airbag sensor receives a short circuit to ground...
- B1928/78 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B1928/78 When one of the following conditions is met: · The center airbag sensor receives a short circuit to B+ signal...
- B2000· Short to B+ in the seat belt motor RH circuit continues for 1 second or more. · Short in the seat belt...
- B2001· Short to ground in seat belt motor RH circuit continues for 1 second or more. · Short in seat belt motor RH...
- B2002Open in the seat belt motor RH circuit continues for 1 second or more.
- B2005· Short to B+ in the seat belt motor LH circuit continues for 1 second or more. · Short in the seat belt...
- B2006· Short to ground in seat belt motor LH circuit continues for 1 second or more. · Short in seat belt motor LH...
- B2007Open in the seat belt motor LH circuit continues for 1 second or more.
- B2015Open in the right side upper MOS.
- B2016Open in the right side lower MOS.
- B2020Open in the left side upper MOS.
- B2021Open in the left side lower MOS.
- B2025Malfunction in the right side current detection HI circuit.
- B2026Malfunction in the right side current detection LO circuit.
- B2027Overcurrent in the right side circuit.
- B2030Malfunction in the left side current detection HI circuit.
- B2031Malfunction in the left side current detection LO circuit.
- B2032Overcurrent in the left side circuit.
- B2035Adherence malfunction in the power supply relay.
- B2036· Malfunction in seat belt control ECU · Power source voltage (+B) is not input to the seat belt control ECU.
- B2040EEPROM malfunction.
- B2041Decline in raised voltage.
- B2043Decline in B+ voltage.
- B2047Malfunction in the inner circuit of the seat belt control ECU.
- B2055There is a malfunction in the millimeter wave radar sensor or there is a problem with the initialization.
- B2056The engine switch is on (IG) and the beam axis of the millimeter wave radar sensor is determined to be...
- B2057The vehicle speed is 5 km/h (3 mph) or more and a malfunction is detected in the yaw rate sensor.
- B2058The vehicle speed is 50 km/h (31 mph) or more and a malfunction is detected in the steering angle sensor.
- B2059The vehicle speed information from the ECM and the vehicle speed information from the master cylinder...
- B2060Malfunction in the brake system is detected.
- B2070While the ignition switch is ON, the skid control ECU buzzer circuit malfunction signal is received by the...
- B2071Malfunction in the brake system is detected.
- B2074Malfunction in the front seat inner belt (buckle switch) circuit.
- B2075Malfunction in the front seat inner belt (buckle switch) circuit.
- C1A01When the engine switch is on (IG), the driving support ECU assembly detects an internal malfunction for...
- C1A02Inconsistent vehicle specification information between the main body ECU (multiplex network body ECU) and...
- C1A0AWhen the engine switch is on (IG), the country specification information from the driving support ECU...
- C1A10When the engine switch is on (IG), the driving support ECU assembly receives information that there is a...
- C1A11When the engine switch is on (IG), misalignment of the millimeter wave radar sensor assembly is detected for...
- C1A14When the vehicle is being driven at a speed of 10 km/h (6 mph) or more, misalignment of the millimeter wave...
- C1A46While the vehicle speed is 5 km/h (3 mph) or more, the driving support ECU assembly receives yaw rate sensor...
- C1A47While the vehicle speed is 50 km/h (31 mph) or more, the driving support ECU assembly receives a steering...
- C1A4AWhen the engine switch is on (IG) and the pre-crash alarm control is operating, either of the following...
- C1A4BEither of the following conditions is met: · When the engine switch is on (IG), the IG1 terminal voltage is...
- C1A50While the engine switch is on (IG), the driving support ECU assembly receives a VSC system malfunction signal...
- C1A63With the ignition switch ON, the driving support ECU assembly receives an accelerator pedal position sensor...
- C1A64While the engine switch is on (IG), the driving support ECU assembly receives a VSC system malfunction signal...
- C1AA0While the engine switch is on (IG), the forward recognition camera detects an internal malfunction for...
- C1AA9When the pre-crash safety system is operating, the driving support ECU assembly detects that Recognition...
- C1AAEWhen the engine switch on (IG), the driving support ECU assembly receives a forward recognition with heater...
- U0100ECM communication error.
- U0100ECM communication error.
- U0122Skid control ECU communication error.
- U0125Lost Communication with Yaw Rate Sensor Module
- U0126Lost Communication with Steering Angle Sensor Module
- U0129Lost Communication with Brake System Control Module
- U0151Center airbag sensor communication error.
- U0235Lost Communication with Cruise Control Front Distance Range Sensor
- U0235The ECM detects a communication error signal sent from the millimeter wave radar sensor to the distance...
- U023ALost Communication with Front Camera Module
- U1002Lost Communi cation with Gateway Module
- U1101Distance control ECU communication error.
- U1102The ECM detects a communication error signal sent from the distance control ECU to the millimeter wave radar...
- U1104Lost Communication with Driving Support ECU
- B1411/11 An open or short in the front room temperature sensor circuit.
- B1411/11 An open or short in the front room temperature sensor circuit.
- B1412An open or short in the cooler thermistor (ambient temperature sensor) circuit is detected for 8.5 minutes or...
- B1412/12 An open or short in the ambient temperature sensor circuit.
- B1412/12 An open or short in the ambient temperature sensor circuit.
- B1412/12 An open or short in the ambient temperature sensor circuit.
- B1413An open or short in the No. 1 cooler thermistor circuit is detected for 8.5 minutes or more.
- B1413/13 An open or short in the No. 1 cooler thermistor (evaporator temperature sensor) circuit.
- B1413/13 An open or short in the No. 1 cooler thermistor (evaporator temperature sensor) circuit.
- B1413/13 An open or short in the No. 1 cooler thermistor circuit.
- B1417/17 An open or short in the No. 2 cooler thermistor (room temperature sensor) circuit.
- B1417/17 An open or short in the No. 2 cooler thermistor circuit.
- B1419/19 An open or short in the cooler thermistor (rear room temperature sensor LH*1 or RH*2) circuit.
- B1419/19 An open or short in the rear room temperature sensor LH*1 or RH*2 circuit.
- B1422An open or short in the compressor lock sensor circuit.
- B1422/22 An open or short in the compressor lock sensor circuit.
- B1422/22 An open or short in the compressor lock sensor circuit.
- B1422/22 An open or short in the compressor lock sensor circuit.
- B1423Either condition is met: · An open or short in the air conditioner pressure sensor circuit. · Refrigerant...
- B1423/23 · An open or short in the air conditioner pressure sensor circuit · Refrigerant pressure on the high pressure...
- B1423/23 · An open or short in the air conditioner pressure sensor circuit · Refrigerant pressure on the high pressure...
- B1423/23 · An open or short in the air conditioner pressure sensor circuit · Refrigerant pressure on the high pressure...
- B1429/29 An open or short in the air duct temperature sensor RH*1 or LH*2 circuit.
- B1429/29 An open or short in the air duct temperature sensor RH*1 or LH*2 circuit.
- B1441/41 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1441/41 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1442The air inlet damper position does not change for 30 seconds or more when the air conditioning amplifier...
- B1442/42 The air inlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1442/42 The air inlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1442/42 The air inlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1443The air outlet damper position does not change for 30 seconds or more when the air conditioning amplifier...
- B1443/43 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1443/43 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1443/43 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1445The air outlet damper position does not change for 30 seconds or more when the air conditioning amplifier...
- B1445/45 The cool air bypass damper position does not change even if the air conditioning amplifier assembly operates...
- B1445/45 The cool air bypass damper position does not change even if the air conditioning amplifier assembly operates...
- B1445/45 The cool air bypass damper position does not change even if the air conditioning amplifier assembly operates...
- B1446The air mix damper position does not change for 30 seconds or more when the air conditioning amplifier...
- B1446/46 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1446/46 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1446/46 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1447/47 The rear air mix damper position does not change even if the air conditioning amplifier assembly operates the...
- B1447/47 The rear air mix damper position does not change even if the air conditioning amplifier assembly operates the...
- B1448/48 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1448/48 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1449/49 The rear air outlet damper position does not change even if the air conditioning amplifier assembly operates...
- B1449/49 The rear mode damper servo motor position does not change even if the air conditioning amplifier assembly...
- B1455/55 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1455/55 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1457/57 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1457/57 The air mix damper position does not change even if the air conditioning amplifier assembly operates the...
- B1458/58 The air mix damper position does not change even if the air conditioning amplifier assembly operates the air...
- B1458/58 The air mix damper position does not change even if the air conditioning amplifier assembly operates the...
- B1467/67 An open or short in the air duct temperature sensor LH*1 or RH*2 circuit.
- B1467/67 An open or short in the air duct temperature sensor LH*1 or RH*2 circuit.
- B1468/68 An open or short in the cooler thermistor (rear room temperature sensor RH*1 or LH*2) circuit.
- B1468/68 An open or short in the rear room temperature sensor RH*1 or LH*2 circuit.
- B1486/86 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1486/86 The air outlet damper position does not change even if the air conditioning amplifier assembly operates the...
- B1488/88 The rear air mix damper position does not change even if the air conditioning amplifier assembly operates the...
- B1488/88 The rear air mix damper position does not change even if the air conditioning amplifier assembly operates the...
- B1497An error or open in the communication line.
- B1497/97 An open or error in the communication line.
- B1497/97 An open or error in the communication line.
- B1497/97 An open or error in the communication line.
- B14A2An open or short in the driver side solar sensor circuit.
- B14A3An open or short in the passenger side solar sensor circuit.
- B14B2Lost communication with the air conditioning control assembly
- B14B2Lost communication with the air conditioning control assembly
- B14B3Lost communication with the No. 2 air conditioning control assembly.
- B14B8When the following conditions is detected using the refrigerant shortage check in normal operation : The...
- B14B8When the following conditions is detected using the refrigerant shortage check in normal operation : The...
- U0100No communication with ECM
- U0100No communication with ECM
- U0100No communication with ECM
- U0100No communication with ECM
- U0131No communication with power steering ECU
- U0131No communication with power steering ECU
- U0142No communication with main body ECU (cowl side junction block LH)
- U0142No communication with main body ECU (cowl side junction block LH)
- U0142No communication with main body ECU (multiplex network body ECU)
- U0142No communication with main body ECU (multiplex network body ECU)
- U0151No communication with airbag sensor assembly
- U0151No communication with combination meter assembly
- U0155No communication with combination meter assembly
- U0155No communication with combination meter assembly
- U0155No communication with combination meter assembly
- U0155No communication with combination meter assembly
- U0163No communication with multi-media module receiver assembly
- B2311When either condition below is met: (a) The power window regulator motor malfunctions. (b) When the ECU in...
- B2311When either condition below is met: (a) The power window regulator motor malfunctions. (b) When the ECU in...
- B2312· The multiplex network master switch assembly is stuck. · The multiplex network master switch assembly is...
- B2312· The multiplex network master switch is stuck. · The multiplex network master switch is held in the same...
- B2313· The power window regulator motor is not initialized. · The power window regulator motor malfunctions.
- B2313· The power window regulator motor is not initialized. · The power window regulator motor malfunctions.
- B2341Sensor (motor) failure
- B2341Sensor (motor) failure
- B2342Sliding roof drive gear (sliding roof ECU) detects sliding roof switch in map light is stuck for 30 seconds...
- B2342Sliding roof drive gear sub-assembly (sliding roof ECU) detects sliding roof switch in map light assembly...
- B2343The sliding roof drive gear (sliding roof ECU) has not been initialized
- B2343The sliding roof drive gear sub-assembly (sliding roof ECU) has not been initialized
- B2344Position failure
- B2344Position failure
- B225AA close position switch malfunction (open or short circuit) signal is received from the lower tail gate lock.
- B225AA close position switch malfunction (open or short circuit) signal is received from the lower tail gate lock.
- B225BA half-latch switch, pawl switch or lower tail gate courtesy switch malfunction (open or short circuit)...
- B225BA half-latch switch, pawl switch or lower tail gate courtesy switch malfunction (open or short circuit)...
- B225CA close position switch malfunction (open or short circuit) signal from the lower tail gate lock LH is...
- B225CA close position switch malfunction (open or short circuit) signal from the lower tail gate lock LH is...
- B225DA half-latch switch, pawl switch or lower tail gate courtesy switch malfunction (open or short circuit)...
- B225DA half-latch switch, pawl switch or lower tail gate courtesy switch malfunction (open or short circuit)...
- B2222Power back door unit does not operate
- B2222Power back door unit does not operate
- B2225Voltage and current malfunction in clutch circuit of power back door unit
- B2225Voltage and current malfunction in clutch circuit of power back door unit
- B2250While back door closer is operating, malfunction is detected in position information from closer position...
- B2250While back door closer is operating, malfunction is detected in position information from closer position...
- B2251While back door closer is operating, malfunction is detected in position information from each switch within...
- B2251While back door closer is operating, malfunction is detected in position information from each switch within...
- B1244When either condition below is met: · Malfunction of the automatic light control sensor. · Open or short in...
- B1244When either condition below is met: · Malfunction of the automatic light control sensor. · Open or short in...
- B124AMalfunction in inner rear view mirror
- B124BMalfunction in automatic high beam system
- B124BMalfunction in automatic high beam system
- B124CMalfunction detected in forward recognition camera*1 or inner rear view mirror assembly*2
- B124CMalfunction in inner rear view mirror camera portion
- B124DMalfunction in LIN communication system
- B2415Malfunction in the vehicle speed sensor.
- B2415Malfunction in the vehicle speed sensor.
- B2416w/o Active Height Control Suspension: · Malfunction in the rear height control sensor LH. · Open or short in...
- B2416· Malfunction in the rear height control sensor LH. · Open or short in the rear height control sensor LH...
- B2417· Malfunction in the headlight leveling motor LH. · Open or short in the headlight leveling motor LH circuit.
- B2417· Malfunction in the headlight leveling motor LH. · Open or short in the headlight leveling motor LH circuit.
- B2418· Malfunction in the headlight leveling motor RH. · Open or short in the headlight leveling motor RH circuit.
- B2418· Malfunction in the headlight leveling motor RH. · Open or short in the headlight leveling motor RH circuit.
- B241A· Malfunction in the rear height control sensor LH. · Open or short in the rear height control sensor LH...
- B241A· Malfunction in the rear height control sensor LH. · Open or short in the rear height control sensor LH...
- B2420· A malfunction in the headlight leveling ECU. (w/ Static Headlight Auto Leveling) · A malfunction in the...
- B2420· A malfunction in the headlight leveling ECU. (w/ Static Headlight Auto Leveling) · A malfunction in the...
- B2424· Malfunction in the headlight leveling motor LH. · Open or short in the headlight leveling motor LH...
- B2424· Malfunction in the headlight leveling motor LH. · Open or short in the headlight leveling motor LH...
- B2425· Malfunction in the headlight leveling motor RH. · Open or short in the headlight leveling motor RH...
- B2425· Malfunction in the headlight leveling motor RH. · Open or short in the headlight leveling motor RH...
- B2427CAN communication malfunction between the headlight swivel ECU and other ECUs.
- B2427CAN communication malfunction between the headlight swivel ECU and other ECUs.
- B2430LED headlight LH circuit malfunction
- B2431LED headlight RH circuit malfunction
- B2432Malfunction in LIN communication system
- B2450· Initialization of the headlight leveling ECU has not been performed. (w/ Static Headlight Auto Leveling) ·...
- B2450· Initialization of the headlight leveling ECU has not been performed. (w/ Static Headlight Auto Leveling) ·...
- B2451Vehicle specifications have not been stored.
- B2451Vehicle specifications have not been stored.
- B2452The sensor value received from the rear height control sensor LH is out of range when performing...
- B2452The sensor value received from the rear height control sensor LH is out of range when performing...
- B2453The vehicle variation is not stored.
- B2453The vehicle variation is not stored.
- U0142Lose communication with main body ECU (multiplex network body ECU)
- U023ACommunication malfunction detected in forward recognition camera (automatic high beam sensor)
Common jobs · 1GR-FE (13)
- Ignition coil: removal · installation
- Drive belt: on-vehicle inspection · removal · installation
- Water pump: on-vehicle inspection · removal · installation
- Thermostat: inspection · removal · installation
- Radiator: on-vehicle inspection
- Fuel pump: inspection
- Fuel filter: replacement
- Injectors: inspection · removal · installation
- Throttle body: on-vehicle inspection · inspection · removal · installation
- Cylinder head: inspection · replacement · disassembly · reassembly
- Engine assembly: on-vehicle inspection · inspection · removal · installation
- Alternator: inspection · removal · disassembly · reassembly · installation
- Starter: inspection · disassembly · reassembly
Common jobs · 1UR-FE (13)
- Ignition coil: removal · installation
- Drive belt: on-vehicle inspection · removal · installation
- Coolant: replacement
- Water pump: on-vehicle inspection · removal · installation
- Thermostat: inspection · removal · installation
- Radiator: on-vehicle inspection
- Fuel pump: inspection
- Injectors: inspection
- Throttle body: on-vehicle inspection · inspection · removal · installation
- Cylinder head gasket: removal
- Engine assembly: on-vehicle inspection · inspection · removal · disassembly · reassembly · installation
- Alternator: inspection · removal · disassembly · reassembly · installation
- Starter: inspection · disassembly · reassembly
Common jobs · 3UR-FE (14)
- Read / clear codes
- DTC list
- Ignition coil: removal · installation
- Drive belt: on-vehicle inspection · removal · installation
- Coolant: replacement
- Water pump: on-vehicle inspection · removal · installation
- Thermostat: inspection · removal · installation
- Radiator: on-vehicle inspection
- Fuel pump: inspection
- Injectors: inspection
- Throttle body: on-vehicle inspection · inspection · removal · installation
- Engine assembly: on-vehicle inspection · inspection · disassembly
- Alternator: inspection · disassembly · reassembly
- Starter: inspection · disassembly · reassembly
Common jobs · 1VD-FTV (11)
- Drive belt: on-vehicle inspection · removal
- Coolant: replacement
- Thermostat: inspection
- Radiator: on-vehicle inspection
- Fuel pump: inspection
- Fuel filter: inspection · replacement
- Injectors: inspection
- Cylinder head: inspection · replacement · disassembly · reassembly
- Engine assembly: inspection · removal · installation
- Alternator: inspection · removal · disassembly · reassembly · installation
- Starter: disassembly · reassembly
Common jobs · chassis & body (8)
- Clutch: inspection · removal · installation
- Front brakes: inspection · removal · disassembly · reassembly
- Rear brakes: inspection · removal · disassembly · reassembly
- Brake fluid: on-vehicle inspection · replacement · bleeding
- Parking brake: inspection · disassembly
- Front drive shaft: inspection · removal · disassembly
- Headlights: removal · disassembly · reassembly · installation · adjustment
- A/C refrigerant: replacement
Repair Manual
General543 documents
Engine / Hybrid System2619 documents
Drivetrain1112 documents
Suspension388 documents
Brake448 documents
Steering355 documents
Audio / Visual / Telematics1151 documents
Power Source / Network456 documents
Vehicle Interior1876 documents
Vehicle Exterior1257 documents