Home › Vehicle Exterior › BODY PANEL › FRAME REAR BUMPER REINFORCEMENT
BM2660E _01 Vehicle Exterior _054376 BODY WELD POINT _0264608 FRAME REAR BUMPER REINFORCEMENT F

BODY WELD POINT  FRAME REAR BUMPER REINFORCEMENT  ASSEMBLY REPLACEMENT  


w/ Towing Hitch


K127169

a.

REMOVAL

Symbol Meaning
K108826

Cut with Disc Sander etc.

K127236


b.

INSTALLATION

Symbol Meaning
K108830

Fillet Weld

INSTALLATION POINT
1.

Make sure that proper welding can be performed by setting up the welding conditions as necessary before performing work.

2.

To prevent heat deformation, weld the right and left side of each part before continuing to the next part.

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K127237C01
6.844,8.573 7.156,8.729 0.313,0.156 10 false *a 4.771,7.542 5.604,7.813 0.833,0.271 10 false 260 (10.24) 2.802,1.229 3.646,1.427 0.844,0.198 10 false 260 (10.24)
*a mm (in.) - -