Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.
Wipe off the remaining double-sided tape using a clean cloth or equivalent.
If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.
After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.
The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.
w/ Tire Carrier
INSTALL SYMBOL EMBLEM
| *1 | Boss |
INSTALL REAR NO. 3 BODY NAME PLATE
| *A | for Type A | *B | for Type B |
| *a | 222.5 mm (8.76 in.) | *b | 16 mm (0.630 in.) |
| *c | 224.5 mm (8.83 in.) | *d | 17 mm (0.669 in.) |
INSTALL NO. 5 BACK DOOR NAME PLATE
| *A | for Type A | - | - |
| *a | 221 mm (8.70 in.) | *b | 159 mm (6.26 in.) |
| *c | 177.9 mm (7.00 in.) | *d | 222.7 mm (8.76 in.) |
| *e | 386.4 mm (15.2 in.) | *f | 220 mm (8.66 in.) |
| *g | 219.5 mm (8.64 in.) | *h | 228.4 mm (8.99 in.) |
| *i | 223.6 mm (8.80 in.) | - | 436.9 mm (17.2 in.) |
| *A | for Type B | - | - |
| *a | 221 mm (8.70 in.) | *b | 159 mm (6.26 in.) |
| *c | 220 mm (8.66 in.) | *d | 219.5 mm (8.64 in.) |
INSTALL REAR LICENSE LIGHT COVER
| *1 | Double-sided Tape |
w/o Tire Carrier
INSTALL SYMBOL EMBLEM
| *1 | Boss |
INSTALL REAR NO. 3 BODY NAME PLATE
for Type A:
| *A | for Type A | - | - |
| *a | 267.5 mm (10.2 in.) | *b | 31.5 mm (1.24 in.) |
for Type B:
| *A | for Type B | - | - |
| *a | 266 mm (10.5 in.) | *b | 32 mm (1.26 in.) |
for Type C:
| *A | for Type C | - | - |
| *a | 160.5 mm (6.32 in.) | *b | 271 mm (10.7 in.) |
| *c | 148 mm (5.83 in.) | *d | 269 mm (10.6 in.) |
INSTALL NO. 5 BACK DOOR NAME PLATE
for Type A:
| *A | for Type A | - | - |
| *a | 32.5 mm (1.28 in.) | *b | 266 mm (10.4 in.) |
| *c | 240.8 mm (9.48 in.) | - | - |
for Type B:
| *A | for Type B | - | - |
| *a | 32.5 mm (1.28 in.) | *b | 266 mm (10.4 in.) |
for Type C:
| *A | for Type C | - | - |
| *a | 32.5 mm (1.28 in.) | *b | 266 mm (10.4 in.) |
INSTALL BACK DOOR NAME PLATE
| *A | for Type C | - | - |
| *a | 33 mm (1.30 in.) | *b | 274 mm (10.8 in.) |
INSTALL NO. 6 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *A | for Type C | - | - |
| *a | 188.5 mm (7.42 in.) | *b | 274 mm (10.8 in.) |