PLASTIC PROPERTIES CHART
When repairing, some parts may be deformed by the heat. Therefore, confirm the properties of the plastic parts, and remove parts beforehand as necessary.
| Code | Material Name | Heat Resistant Temperature Limit* °C (°F) | Resistance to Alcohol or Gasoline | Notes |
|---|---|---|---|---|
| AAS | Acrylonitrile Acrylic Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| ABS | Acrylonitrile Butadiene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| AES | Acrylonitrile Ethylene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| ASA | Acrylonitrile Styrene Acrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| CAB | Cellulose Acetate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| EPDM | Ethylene Propylene | 100 (212) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| EVA | Ethylene Acetate | 70 (158) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| E/VAC | Ethylene/Vinyl Acetate Copolymer Resin | 70 (158) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| FRP | Fiber Reinforced Plastics | 180 (356) | Alcohol and gasoline are harmless. | Avoid alkali. |
| PA | Polyamide (Nylon) | 80 (176) | Alcohol and gasoline are harmless. | Avoid battery acid. |
| PBT | Polybutylene Terephthalate | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PC | Polycarbonate | 120 (248) | Alcohol is harmless. | Avoid gasoline, brake fluid, wax, wax removers and organic solvents. Avoid alkali. |
| PE | Polyethylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PEI | Polyetherimide | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PET | Polyethylene Terephthalate | 75 (167) | Alcohol and gasoline are harmless. | Avoid dipping in water. |
| PGM | Polypropylene Glass Fiber Pulp | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PMMA | Polymethyl Methacrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| POM | Polyoxymethylene (Polyacetal) | 100 (212) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PP | Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPC | Polyphthlate Carbonate | 149 (300) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPE | Polyphenylene Ether | 80 (176) | Alcohol is harmless if applied only for short time in small amounts (e.g., quick wiping to remove grease). | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PPF | Composite Reinforced Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPO | Modified Polyphenylene Oxide | 100 (212) | Alcohol is harmless. | Gasoline is harmless if applied only for quick wiping to remove grease. |
| PS | Polystyrene | 60 (140) | Alcohol and gasoline are harmless if applied only for short time in small amounts. | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PUR | Polyurethane | 80 (176) | Alcohol is harmless if applied only for very short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PVC | Polyvinylchloride (Vinyl) | 80 (176) | Alcohol and gasoline are harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| SAN | Styrene Acrylonitrile | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TPE | Thermoplastic Elastomer | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPO | Thermoplastic Olefine | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPU | Thermoplastic Polyurethane | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TSOP | TOYOTA Super Olefine Polymer | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| UP | Unsaturated Polyester | 110 (233) | Alcohol and gasoline are harmless. | Avoid alkali. |
*The heat resistant temperature means a temperature that may cause heat deformation during a procedure.
THE PLASTIC BODY PARTS MATERIAL LIST
| *A | w/ Bumper Guard | *B | w/ Winch Cover |
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Hole Cover (ABS/PP, PP) |
| *3 | Radiator Grille (ABS, ABS/ASA, ASA) | *4 | Cool Air Intake Duct (PE) |
| *5 | Air Precleaner (PP) | *6 | Radiator Grille Emblem (AES/PC, AES/ABS, ABS) |
| *7 | Headlight Washer Cover (ABS) | *8 | Headlight (PC/PP) |
| *9 | Front Fog Light (PC) | *10 | Cowl Top Ventilator Louver (PP) |
| *11 | Windshield Outside Moulding (PVC/PP) | *12 | Front Pillar Lower Cover (ASA) |
| *13 | Outer Rear View Mirror (ASA/ABS) | *14 | Side Turn Signal Light (PMMA/ASA) |
| *15 | Side Turn Signal Light (PMMA/ABS) | *16 | Roof Drip Side Finish Moulding (PP/EPDM/TPO/AES) |
| *17 | Front Fender Mudguard (PP) | *18 | Quarter Panel Mudguard (PP) |
| *19 | Door Outside Moulding (ABS) | *20 | Rocker Panel Moulding (TSOP) |
| *21 | Step Plate Cover (TSOP/PP/EPDM) | *22 | Front Bumper Guard (PP/ABS) |
| *23 | Front Bumper Winch Cover (PP) | - | - |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
| *A | w/ Tire Carrier | *B | Kannon Door Type |
| *1 | Roof Carrier (ABS) | *2 | Door Window Frame Moulding (ASA) |
| *3 | Door Outside Handle (PC/PBT/PA) | *4 | Antenna Outer Cover (PC/ABS) |
| *5 | Rear Spoiler (ABS) | *6 | Back Door Outside Garnish (ABS, ABS/AES) |
| *7 | Back Door Lock Cover (PP/PE) | *8 | License Plate Light (PC, PMMA/ABS) |
| *9 | Rear Combination Light (PMMA/ASA) | *10 | Rear Light (PMMA/ASA/ABS) |
| *11 | Rear Fog Light (PC) | *12 | Rear Bumper Cover (TSOP, TSOP/PP) |
| *13 | Rear Bumper Lower Cover (TSOP, PP) | *14 | Emblem (ABS) |
| *15 | Spare Wheel Cover (TSOP, PP) | - | - |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.