Home › General › ENGINE › 1GR-FE ENGINE
NM2660E _V1 General _054359 ENGINE _0266961 1GR-FE ENGINE UN GENERAL/CONTROL/DETAILS F

ENGINE  1GR-FE ENGINE  GENERAL/CONTROL/DETAILS  FEATURES OF 1GR-FE ENGINE  


FEATURES OF 1GR-FE ENGINE


a.

This engine has been able to achieve the following performance features through the use of the items listed below:

(1) High performance and reliability

(2) Low noise and vibration

(3) Lightweight and compact design

(4) Good serviceability

(5) Clean emissions and fuel economy


*: Models with air injection system

Item (1) (2) (3) (4) (5)
Engine Proper Upright intake ports are used. ○ - ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
A steel laminate type cylinder head gasket is used. ○ - - - -
A cylinder block sub-assembly made of aluminum alloy is used. - - ○ - -
Cylinder block water jacket spacers are used. ○ - - - -
The piston skirt is coated with resin. ○ ○ - - ○
A No. 1 oil pan made of aluminum alloy is used. - ○ ○ - -
Valve Mechanism Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used. ○ - - - ○
Timing chains and chain tensioners are used. ○ ○ ○ - -
Valve lash adjuster assemblies are used. ○ ○ - ○ ○
Valve rocker arm sub-assemblies are used. ○ - - - ○
Lubrication System An oil filter with a replaceable element is used. - - - ○ -
Cooling System Toyota genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System A linkless-type throttle body is used. - - ○ ○ -
An intake air surge tank made of plastic is used. - - ○ - -
Stainless steel exhaust manifolds are used. - - ○ - -
Ceramic type Three-Way Catalytic converters (TWCs) are used. - - - - ○
Fuel System 12-hole type fuel injector assemblies are used to improve the atomization of fuel. ○ - - - ○
A fuel delivery pipe sub-assembly that is made of plastic is used. - - ○ - -
Ignition System The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
Long-reach type iridium-tipped spark plugs are used. ○ - - ○ ○
Charging System A segment conductor type generator is used. ○ - ○ - -
A generator pulley with a clutch is used. - - - - ○
Starting System A Planetary reduction-Segment (PS) type starter is used. - - ○ - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System Magnetic Resistance Element (MRE) type VVT sensors are used. ○ - - - -
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The Dual Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
An air injection system is used.* - - - - ○
A starter control (cranking hold function) is used. ○ - - - -
An evaporative emission control system is used. - - - - ○

HINT:

○: Applicable

-: Not applicable