Home › General › ENGINE › 1GR-FE ENGINE
NM2660E _V1 General _054359 ENGINE _0266961 1GR-FE ENGINE UN GENERAL/CONTROL/DETAILS F

ENGINE  1GR-FE ENGINE  GENERAL/CONTROL/DETAILS  VALVE MECHANISM  


General


a.

The intake camshafts are driven by the crankshaft via the No.1 chain. The intake camshaft of the respective bank drives the exhaust camshafts via the No.2 chain.


b.

A Dual Variable Valve Timing-intelligent (VVT-i) system is used. As a result, the valve timing has been optimized, achieving lower fuel consumption, higher engine performance and lower exhaust emissions.


c.

A valve rocker arm sub-assemblies with built-in needle bearings are used. This reduces the friction that occurs between the cams and the valve rocker arm sub-assemblies that push the valves down, thus improving fuel economy.


d.

Valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.

W133207C01
5.875,1.74 6.26,1.615 false 5.802,2.021 6.333,1.979 false 5.563,2.25 6.125,2.323 false 5.417,2.521 5.979,2.708 false 5.365,2.719 5.906,3.01 false 5.167,3.135 5.646,3.573 false 5.083,1.75 5.51,1.948 false 2.625,1.125 2.99,0.667 true 3.396,1.5 3.76,1.042 true 3.531,1.906 3.99,2.198 true 0.729,1.333 1.156,1.5 true 0.979,0.938 1.323,1.292 true 2.344,2.24 3.083,3.979 true 2.031,1.917 2.177,3.958 true 2.51,2.198 3.521,3.458 true 1.25,0.635 1.49,1.188 true 0.781,2.615 1.656,2.177 true 2.083,0.635 1.833,1.427 true 0.542,1.219 0.865,1.51 0.323,0.292 10 false *1 0.823,0.781 1.146,1.083 0.323,0.302 10 false *2 4.031,2.156 4.375,2.427 0.344,0.271 10 false *3 3,0.49 3.354,0.771 0.354,0.281 10 false *4 0.594,2.563 0.948,2.823 0.354,0.26 10 false *5 1.125,0.458 1.479,0.719 0.354,0.26 10 false *6 6.313,1.51 6.656,1.76 0.344,0.25 10 false *7 4.896,1.635 5.208,1.896 0.313,0.26 10 false *8 5.698,3.583 5.969,3.917 0.271,0.333 10 false *9 5.969,3.021 6.313,3.302 0.344,0.281 10 false *10 6.042,2.656 6.406,2.885 0.365,0.229 10 false *11 6.177,2.26 6.521,2.5 0.344,0.24 10 false *12 6.396,1.906 6.896,2.198 0.5,0.292 10 false *13 3.771,0.865 4.125,1.146 0.354,0.281 10 false *4 2.052,0.458 2.396,0.729 0.344,0.271 10 false *3 3.552,3.458 3.906,3.719 0.354,0.26 10 false *6 3.104,4.031 3.427,4.323 0.323,0.292 10 false *1 2.125,4.01 2.448,4.313 0.323,0.302 10 false *2
*1 Camshaft Timing Gear Assembly (Exhaust) *2 Camshaft Timing Gear Assembly (Intake)
*3 Exhaust Camshaft *4 Intake Camshaft
*5 No. 1 Chain *6 No. 2 Chain
*7 Valve Rocker Arm Sub-assembly *8 Valve Spring Retainer
*9 Valve *10 Valve Spring Seat
*11 Valve Guide Bush *12 Compression Spring
*13 Valve Lash Adjuster Assembly - -




Camshaft


a.

The camshafts are made of a cast iron alloy.


b.

A camshaft timing gear assembly has been added at the front end of the exhaust camshafts to vary the timing of the exhaust valves.


c.

Oil passages are provided on the intake and exhaust camshafts in order to supply engine oil to the VVT-i system.


d.

Together with the use of the valve rocker arm sub-assemblies, the cam profile has been optimized. This results in increased valve lift when the valve begins to open and as it finishes closing, helping to achieve enhanced output performance.

W133208C01
0.708,3.583 2.552,5.406 1.844,1.823 1.26,5.125 1.458,4.708 true 1.208,3.927 1.396,4.333 true 5.656,0.667 6.167,0.375 6.167,0.375 6.063,0.656 true 1.167,1.177 1.5,1.76 true 2.708,0.865 3.042,1.448 true 3.688,0.854 3.479,1.438 true 4.271,1.167 4.01,1.854 true 5.708,2.427 6.125,2.427 true 6.052,3.135 6.344,3.5 true 5.229,3.396 5.604,4.01 true 4.146,3.802 3.896,4.458 true 3.594,3.115 3.125,3.604 true 2.5,2.521 2.115,3.083 true 3.729,3.219 3.635,3.99 true 2.375,2.292 1.792,2.646 true 4.229,0.979 4.479,1.208 0.25,0.229 10 false *1 3.667,0.656 3.969,0.917 0.302,0.26 10 false *2 6.177,2.365 6.542,2.74 0.365,0.375 10 false *3 6.396,3.531 6.74,3.813 0.344,0.281 10 false *4 1.969,3.083 2.302,3.354 0.333,0.271 10 false *5 1.031,1 1.448,1.25 0.417,0.25 10 false *6 3.531,4.052 3.844,4.333 0.313,0.281 10 false *7 2.583,0.667 2.948,0.938 0.365,0.271 10 false *8 5.74,1.385 6.177,1.76 0.438,0.375 10 false *a 6.188,0.25 6.49,0.521 0.302,0.271 10 false *b 0.781,3.646 1.094,3.948 0.313,0.302 10 false *c 1.167,5.156 1.542,5.396 0.375,0.24 10 false *d 1.073,3.76 1.448,4 0.375,0.24 10 false *d 2.99,3.615 3.25,3.938 0.26,0.323 10 false *5 3.781,4.5 4.198,4.75 0.417,0.25 10 false *6 1.594,2.646 1.927,2.906 0.333,0.26 10 false *7 5.646,4.042 6.01,4.313 0.365,0.271 10 false *8
*1 No. 1 Camshaft (Intake) *2 No. 2 Camshaft (Exhaust)
*3 No. 3 Camshaft (Intake) *4 No. 4 Camshaft (Exhaust)
*5 Camshaft Timing Gear Assembly (Intake) *6 Camshaft Timing Gear Assembly (Exhaust)
*7 Timing Rotor for VVT Sensor (Intake) *8 Timing Rotor for VVT Sensor (Exhaust)
*a Cam with Indented R *b Indented R Portion of Cam (Profile)
*c Cross Section of End of Intake Camshaft *d Oil Passage




Timing Chain and Chain Tensioner


a.

Both the No. 1 and No. 2 chains use roller chains with a pitch of 9.525mm (0.375 in.).


b.

The timing chain is lubricated by timing chain oil jet.


c.

The No. 1 chain uses one timing chain tensioner and each of the No. 2 chains for the right and left banks uses one timing chain tensioner.


d.

The chain tensioners use a spring and oil pressure to maintain proper chain tension at all times. They suppress noise generated by the timing chains.


e.

The No. 1 chain tensioner is the ratchet type with a non-return mechanism.

W133209C01
5.927,1.542 6.344,1.125 true 6.219,1.719 6.573,1.51 true 4.885,2.354 6.271,2.354 true 5.375,2.531 6.104,2.823 true 5.167,2.802 6.052,3.26 true 4.823,3.104 5.781,3.906 true 4.385,3.26 4.177,4.104 true 3.875,2.25 3.583,3.198 true 3.427,1.917 3.292,2.208 true 3.75,1.51 4.01,0.521 true 4.438,1.635 4.719,0.854 4.719,0.854 5.073,1.813 true 1.625,1.958 1.302,1.958 true 1.635,1.896 1.344,1.635 true 2.021,2.083 1.698,2.083 true 2.063,2.281 1.74,2.281 true 1.906,3.146 1.781,2.771 1.781,2.771 1.677,2.771 true 2.667,3.125 2.438,3.125 true 2.667,3.573 2.448,3.51 true 2.448,3.792 2.281,3.792 2.281,3.792 2.146,3.563 true 6.115,3.25 6.354,3.49 0.24,0.24 10 false *1 6.656,1.417 7.042,1.813 0.385,0.396 10 false *2 3.458,3.25 3.771,3.5 0.313,0.25 10 false *3 3.979,0.302 4.26,0.563 0.281,0.26 10 false *4 6.385,0.979 6.677,1.26 0.292,0.281 10 false *5 6.177,2.802 6.542,3.063 0.365,0.26 10 false *6 4.656,0.656 4.958,0.948 0.302,0.292 10 false *7 6.344,2.271 6.667,2.573 0.323,0.302 10 false *8 4.063,4.135 4.438,4.427 0.375,0.292 10 false *9 5.833,3.938 6.396,4.313 0.563,0.375 10 false *10 1.104,1.51 1.448,1.719 0.344,0.208 10 false *11 1.042,1.875 1.406,2.135 0.365,0.26 10 false *12 2.063,2 2.333,2.208 0.271,0.208 10 false *13 2.115,2.219 2.427,2.438 0.313,0.219 10 false *14 1.427,2.667 1.698,2.885 0.271,0.219 10 false *15 2.719,3.531 3.063,3.781 0.344,0.25 10 false *16 2.49,3.698 2.813,3.979 0.323,0.281 10 false *17 2.698,3.042 3.01,3.26 0.313,0.219 10 false *14 3.167,2.24 3.552,2.635 0.385,0.396 10 false *2
*1 No. 1 Chain *2 No. 2 Chain
*3 No. 1 Chain Tensioner *4 No. 2 Chain Tensioner
*5 No. 3 Chain Tensioner *6 No. 1 Chain Vibration Damper
*7 No. 2 Chain Vibration Damper *8 No. 1 Idle Gear
*9 Chain Tensioner Slipper *10 Timing Chain Oil Jet
*11 Ball *12 Ball Spring
*13 Main Spring *14 Plunger
*15 Spring *16 Cam
*17 Cam Spring - -




Timing Chain Cover


a.

The timing chain cover has an integrated construction consisting of the cooling system (water pump and water passage) and the lubrication system (oil pump and oil passage). Thus, the number of parts has been reduced to reduce weight.

W133210C01
0.115,0.198 3.865,3.563 3.75,3.365 3.958,0.198 7.125,3.563 3.167,3.365 4.51,3.365 4.844,3.188 false 5.167,2.271 5.438,2.677 false 5.333,0.458 5.604,0.865 false 6.365,2.927 6.365,3.333 true 1.698,0.521 1.969,0.927 false 1.177,1.552 1.385,2.042 false 0.948,2.885 0.719,3.229 false 2.656,2.167 3.5,2.375 true 4.26,2.708 4.417,2.458 false 0.552,3.25 0.844,3.5 0.292,0.25 10 false *1 1.052,1.365 1.479,1.729 0.427,0.365 10 false *2 1.542,0.365 1.969,0.615 0.427,0.25 10 false *3 4.323,3.323 4.698,3.542 0.375,0.219 10 false *4 5.021,2.094 5.365,2.313 0.344,0.219 10 false *5 4.125,2.75 4.49,3.063 0.365,0.313 10 false *6 0.188,0.271 0.615,0.667 0.427,0.396 10 false *a 4.031,0.271 4.479,0.594 0.448,0.323 10 false *b 3.552,2.344 3.854,2.646 0.302,0.302 10 false *c 6.281,3.375 6.542,3.583 0.26,0.208 10 false *d 5.198,0.292 5.625,0.542 0.427,0.25 10 false *3
*1 Water Pump Assembly *2 Water Pump Gasket
*3 Timing Chain Cover *4 Oil Pump Housing
*5 Oil Pump Rotor *6 Oil Passage
*a Front Side View *b Back Side View
*c Water Pump Swirl Chamber *d Oil Pump Chamber




Valve Lash Adjuster Assembly


a.

The valve lash adjuster assembly, which is located at the fulcrum of the valve rocker arm sub-assembly, consists primarily of a plunger, plunger spring, check ball and check ball spring.


b.

The engine oil that is supplied by the cylinder head and the built-in spring actuate the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the valve rocker arm sub-assembly against the cam, in order to adjust the valve clearance that is created during the opening and closing of the valve. As a result, engine noise is reduced.

W133211C01
2.427,1.021 2.844,0.604 false 4.604,0.969 5.01,0.458 true 4.667,1.458 5.604,1.094 true 3.583,2.813 4.427,2 true 3.542,1.438 4.344,1.854 true 1.177,1.51 1.979,1.927 false 1.052,2.125 2.208,2.573 true 1.26,2.719 2.229,2.719 true 1.271,3.354 2.156,2.813 true 2.896,0.458 3.24,0.792 0.344,0.333 10 false *1 0.854,2.031 1.24,2.302 0.385,0.271 10 false *2 1.031,2.635 1.438,2.917 0.406,0.281 10 false *3 1.083,3.333 1.49,3.635 0.406,0.302 10 false *4 3.427,2.823 3.74,3.063 0.313,0.24 10 false *5 5,0.281 5.333,0.521 0.333,0.24 10 false *6 5.677,0.99 6.042,1.26 0.365,0.271 10 false *7 3.354,1.302 3.677,1.563 0.323,0.26 10 false *a 0.99,1.385 1.354,1.688 0.365,0.302 10 false *a
*1 Plunger *2 Check Ball
*3 Check Ball Spring *4 Plunger Spring
*5 Valve Lash Adjuster Assembly *6 Cam
*7 Valve Rocker Arm Sub-assembly - -
*a Oil Passage - -


HINT:

Valve clearance adjustment is not necessary because valve lash adjuster assemblies are used.