Home › General › CHASSIS › STEERING
NM2660E _V1 General _054360 CHASSIS _0267100 STEERING UN GENERAL/CONTROL/DETAILS F

CHASSIS  STEERING  GENERAL/CONTROL/DETAILS  VARIABLE FLOW CONTROL (VFC) POWER STEERING  


General


a.

The Variable Flow Control (VFC) power steering is provided with a solenoid valve in the vane pump, which is controlled by the power steering ECU. The solenoid valve controls the discharge flow rate of the power steering fluid in accordance with the operating conditions of the steering wheel, vehicle speed, and engine speed. Thus, it reduces the load on the engine applied by the actuation of the vane pump, and improves fuel economy.



System Diagram


X133402E01
3.125,1.833 4.094,2.427 0.969,0.594 10 false Power Steering ECU Assembly 0.917,0.146 1.417,0.49 0.5,0.344 10 false ECM 0.469,0.604 1.854,0.948 1.385,0.344 10 false Engine Speed Signal 0.542,1.188 1.708,1.531 1.167,0.344 10 false Skid Control ECU 0.448,1.635 1.865,1.979 1.417,0.344 10 false Vehicle Speed Signal 0.531,2.208 1.708,2.552 1.177,0.344 10 false 4WD Control ECU 0.375,2.667 1.865,3.021 1.49,0.354 10 false Transfer Position Signal 0.438,3.24 1.844,3.583 1.406,0.344 10 false Steering Angle Sensor 0.458,3.698 1.854,4.042 1.396,0.344 10 false Steering Angle Signal 0.479,4.167 1.844,4.521 1.365,0.354 10 false Steering Speed Signal 5.625,0.875 6.427,1.24 0.802,0.365 10 false Vane Pump 5.375,1.313 6.604,1.677 1.229,0.365 10 false VFC Solenoid Valve 5.406,3.083 6.656,3.427 1.25,0.344 10 false Combination Meter 5.083,3.531 6.917,3.885 1.833,0.354 10 false Power Steering Warning Light


Layout of Main Components


X133403C01
2.031,2.208 1.5,1.417 true 1.365,2.583 0.417,3.083 true 3.5,3.833 2.729,2.698 true 1.396,1.25 1.708,1.448 0.313,0.198 10 false *1 0.26,3.01 0.573,3.208 0.313,0.198 10 false *2 3.479,3.833 3.792,4.031 0.313,0.198 10 false *3
*1 ECM *2 Vane Pump Assembly
·

VFC Solenoid Valve


*3 Hydraulic Brake Booster
·

Skid Control ECU


- -


X133404C01
2.583,1.667 2.167,0.75 true 2.896,3.469 2.896,2.302 true 2.031,3.417 2.563,2.688 true 5.5,1.25 6.25,0.917 true 5.104,1.24 5.5,0.417 true 2.063,0.594 2.375,0.792 0.313,0.198 10 false *1 1.896,3.406 2.208,3.604 0.313,0.198 10 false *2 2.813,3.469 3.125,3.667 0.313,0.198 10 false *3 6.26,0.823 6.573,1.021 0.313,0.198 10 false *4 5.448,0.25 5.76,0.448 0.313,0.198 10 false *5
*1 Combination Meter *2 DLC3
*3 Steering Angle Sensor *4 Power Steering ECU Assembly
*5 4WD Control ECU - -



System Operation


a.

The power steering ECU assembly effects the following controls:

Control Function
Flow Rate Control
·

It effects control in accordance with the vehicle speed, steering angle, and steering speed conditions. It effects assist control when the steering wheel is being operated and standby control when the steering wheel is not being operated. Thus, it prevents the vane pump from discharging excessive flow, which lightens the load on the engine and improves fuel economy.

·

Control characteristics have been achieved, which prevent the discharge flow rate from changing as much as possible in accordance with changes of the steering speed and vehicle speed when the transfer position L4 is selected. Also, the following corrections are made to determine an optimal discharge flow rate.


Steering Angle Correction Determines the discharge flow rate in accordance with driving conditions such as steering at standstill, cornering, or straightline driving.
Engine Speed Correction Determines the discharge flow rate in accordance with the engine speed.
Fail-safe If the steering control ECU detects a malfunction in the VFC power steering system, it makes the steering feel heavier than normal, in order to inform the driver of a system failure.