Home › General › ENGINE › 1VD-FTV ENGINE
NM2660E _V1 General _054359 ENGINE _0267381 1VD-FTV ENGINE UN GENERAL/CONTROL/DETAILS F

ENGINE  1VD-FTV ENGINE  GENERAL/CONTROL/DETAILS  VALVE MECHANISM  


General


a.

Each cylinder has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased by means of the larger total port areas.


b.

The timing gear train uses a combination of gears and a timing chain.


c.

This engine uses roller rocker arms with built-in needle bearings. This reduces the friction that occurs between the cams and the areas (roller rocker arms) that push the valves down, thus improving fuel economy.


d.

Valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.

W133088C01
2.5,0.823 2.792,0.292 true 1.75,1.167 1.344,0.375 true 4.188,3.375 3.615,2.458 true 4.854,1.344 4.313,1.615 true 6.281,1.323 6.396,1.708 true 5.896,1.792 6.146,2.177 true 5.677,2.094 6.063,2.365 true 5.583,4.104 5.969,4.375 true 5.927,3.177 6.313,3.448 true 6.563,2.375 6.781,2.521 true 6.021,2.917 6.438,3.156 true 1.208,0.188 1.521,0.344 0.313,0.156 10 false *1 4.875,1.24 5.188,1.396 0.313,0.156 10 false *2 6.177,1.135 6.49,1.292 0.313,0.156 10 false *3 5.729,1.615 6.042,1.771 0.313,0.156 10 false *4 5.479,1.927 5.792,2.083 0.313,0.156 10 false *5 6.021,4.302 6.333,4.458 0.313,0.156 10 false *6 6.521,3.135 6.771,3.302 0.25,0.167 10 false *8 4.188,3.417 4.5,3.573 0.313,0.156 10 false *1 2.802,0.156 3.115,0.313 0.313,0.156 10 false *2 6.385,3.438 6.698,3.594 0.313,0.156 10 false *7 6.833,2.5 7.083,2.667 0.25,0.167 10 false *9
*1 Exhaust Camshaft *2 Intake Camshafts
*3 Valve Rocker Arm Sub-assembly *4 Valve Spring Retainer
*5 Compression Spring *6 Valve
*7 Valve Spring Seat *8 Valve Guide Bush
*9 Valve Lash Adjuster Assembly - -




Timing Gear Train


a.

An intake camshaft is driven by gears and a timing chain, and the exhaust camshaft is driven by a cam gear attached to the intake camshaft.


b.

Timing chains use bush chains with a pitch of 9.525mm (0.375 in.).


c.

The timing chains are lubricated by an oil jet.


d.

Chain tensioners use a spring and oil pressure to maintain proper chain tension at all times. They suppress noise generated by the timing chains


e.

The chain tensioners are the ratchet type with a non-return mechanism.


f.

The No. 1 Idle gear and cam gear are constructed with a scissors gear to reduce noise.

W133089C01
4.021,1.208 3.823,0.427 true 3.375,0.979 3.146,0.365 true 3.417,1.469 2.646,0.51 true 2.49,1.031 1.969,0.667 true 2.438,1.313 1.823,1.094 true 2.146,1.646 1.635,1.604 true 3.271,3.479 3.385,1.781 true 1.865,2.833 1.656,2.688 true 1.885,3.438 1.542,3.76 true 2.25,3.229 2.354,3.99 true 2.302,2.708 2.208,2.875 true 4.563,3.646 4.167,3.052 true 4.958,2.99 4.26,2.51 true 5.875,2.385 5.042,1.76 true 6.24,1.615 5.833,1.646 true 6.24,1.198 5.521,1.333 true 6.031,0.854 5.563,1.031 true 5.052,0.594 4.844,0.99 true 4.771,0.438 4.656,0.813 true 5.469,0.594 4.625,1.542 true 3.719,0.198 4.031,0.354 0.313,0.156 10 false *1 3.031,0.188 3.344,0.344 0.313,0.156 10 false *2 2.469,0.323 2.781,0.479 0.313,0.156 10 false *3 1.781,0.51 2.094,0.667 0.313,0.156 10 false *4 1.594,0.99 1.906,1.146 0.313,0.156 10 false *5 1.438,1.51 1.75,1.667 0.313,0.156 10 false *6 1.49,2.51 1.802,2.667 0.313,0.156 10 false *8 1.354,2.25 1.667,2.406 0.313,0.156 10 false *7 1.385,3.771 1.635,3.927 0.25,0.156 10 false *9 2.271,4.031 2.521,4.188 0.25,0.156 10 false *10 2.25,2.5 2.5,2.656 0.25,0.156 10 false *11 3.115,3.552 3.365,3.708 0.25,0.156 10 false *12 4.604,3.656 4.854,3.813 0.25,0.156 10 false *13 5.021,3.01 5.271,3.167 0.25,0.156 10 false *14 5.969,2.396 6.219,2.552 0.25,0.156 10 false *15 6.302,1.542 6.615,1.698 0.313,0.156 10 false *6 6.292,1.135 6.542,1.292 0.25,0.156 10 false *16 5.073,0.396 5.323,0.552 0.25,0.156 10 false *18 6.094,0.74 6.344,0.896 0.25,0.156 10 false *17 4.729,0.208 4.979,0.365 0.25,0.156 10 false *19 5.49,0.458 5.802,0.615 0.313,0.156 10 false *3
*1 Supply Pump Drive Gear *2 No. 1 Chain Vibration Damper
*3 Oil Jet *4 No. 1 Timing Chain
*5 No. 1 Camshaft Timing Sprocket *6 Cam Gear
*7 No. 1 Chain Tensioner Assembly *8 Plunger
*9 Spring *10 Cam Spring
*11 Cam *12 No. 1 Chain Tensioner Slipper
*13 Crankshaft Timing Gear *14 No. 1 Idle Gear
*15 No. 2 Chain Vibration Damper *16 No. 2 Camshaft Timing Sprocket
*17 No. 2 Timing Chain *18 No. 2 Chain Tensioner Slipper
*19 No. 2 Chain Tensioner Assembly - -




Timing Chain Cover


a.

The timing chain cover has an integrated construction consisting of the cooling system (water pump and water passage). Thus, the number of parts has been reduced for weight reduction.

W133090C01
2.906,2.49 2.542,2.063 true 3.573,2.469 3.208,2.042 true 4.948,2.531 4.583,2.104 true 5.177,0.917 4.552,1.396 true 2.896,2.563 3.208,2.719 0.313,0.156 10 false *1 3.635,2.51 3.948,2.667 0.313,0.156 10 false *2 5,2.521 5.313,2.677 0.313,0.156 10 false *3 5.198,0.833 5.51,0.99 0.313,0.156 10 false *a
*1 Water Pump Assembly *2 Water Pump Gasket
*3 Timing Chain Cover - -
*a Water Pump Swir lChamber - -




Hydraulic Lash Adjuster


a.

The valve lash adjuster assembly, which is located at the fulcrum of the roller rocker arm sub-assembly, consists primarily of a plunger, plunger spring, check ball, and check ball spring.


b.

The engine oil that is supplied by the cylinder head and the built-in spring actuates the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the roller rocker arm sub-assembly against the cam, in order to adjust the valve clearance that is created during the opening and closing of the valve. As a result, engine noise is reduced.

W133091C01
1.115,1.073 1.594,1.427 true 1.198,1.615 1.875,1.969 true 1.271,2.042 1.844,2.083 true 1.271,2.417 1.781,2.219 true 2.094,0.51 2.333,0.292 true 3.552,0.448 4.365,0.844 true 4.302,0.188 4.521,0.354 true 3.406,0.875 4.219,1.125 true 3.375,1.823 4.323,1.26 true 0.99,1.531 1.302,1.688 0.313,0.156 10 false *1 1.01,1.958 1.323,2.115 0.313,0.156 10 false *2 1.052,2.385 1.365,2.542 0.313,0.156 10 false *3 2.375,0.188 2.688,0.344 0.313,0.156 10 false *4 0.938,0.927 1.25,1.083 0.313,0.156 10 false *a 3.385,0.354 3.698,0.51 0.313,0.156 10 false *6 4.083,0.052 4.396,0.208 0.313,0.156 10 false *5 3.219,0.75 3.531,0.906 0.313,0.156 10 false *a 3.219,1.823 3.531,1.979 0.313,0.156 10 false *7
*1 Check Ball *2 Check Ball Spring
*3 Plunger Spring *4 Plunger
*5 Cam *6 Roller Rocker Arm Sub-assembly
*7 Valve Lash Adjuster Assembly - -
*a Oil Passage - -


HINT:

Valve clearance adjustment is not necessary because a valve lash adjusters are used in this model.