Home › General › ENGINE › 1VD-FTV ENGINE
NM2660E _V1 General _054359 ENGINE _0267381 1VD-FTV ENGINE UN GENERAL/CONTROL/DETAILS F

ENGINE  1VD-FTV ENGINE  GENERAL/CONTROL/DETAILS  FUEL SYSTEM  


General


a.

A common-rail system is used in the fuel injection system.


b.

3-plunger type (HP4 type) supply pump assembly, which is compact and lightweight, is used.


c.

An injector compensation value and a QR code are printed on the injector assembly to realize high-precision control.


d.

A fuel filter, in which the fuel filter element alone can be replaced, is used.


e.

A fuel filter warning switch is provided in the fuel filter.


f.

A recirculation type fuel heater is provided in the fuel filter.*1


g.

2 fuel cooler assemblies are used in the fuel return path.*2


h.

Quick connectors are used to connect the fuel lines for ease of serviceability.


i.

The dual fuel tank comprising a fuel tank sub-assembly and fuel sub tank sub-assembly is provided. A multi-layer plastic fuel tank is used for the fuel tank sub-assembly. (The fuel sub tank sub-assembly however is made of steel.)*3


j.

A fuel pump and jet pump are provided in the fuel tank sub-assembly to transfer fuel from the fuel sub tank sub-assembly to the fuel tank sub-assembly.*3


k.

A fuel pressure discharge valve is used.*4


l.

8 solenoid type injector assemblies are used.*2


m.

8 piezo type injector assemblies are used.*4


n.

2 exhaust fuel addition injector assemblies are used.*4


o.

A fuel feeding pipe for the exhaust fuel addition injector assembly is provided on the supply pump assembly.*4

*1: Models for Europe and optional equipment on models for general countries.

*2: Except models compliant with EURO 5 emission regulations

*3: Models with dual fuel tank

*4: Models compliant with EURO 5 emission regulations


W133117C01
1.969,2.396 1.563,1.188 true 1.51,2.51 0.76,1.5 true 0.948,3.844 1.677,2.75 true 1.646,4.26 1.875,2.802 true 2.604,4.365 2.417,2.844 true 4.688,4.104 4.198,2.677 true 6.5,3.625 5.813,2.344 true 3.958,2.219 4.021,0.448 true 3.01,2.552 2.917,0.625 true 1.427,1.01 1.74,1.167 0.313,0.156 10 false *1 0.625,1.313 0.938,1.469 0.313,0.156 10 false *2 0.844,3.865 1.156,4.021 0.313,0.156 10 false *3 1.542,4.313 2.052,4.531 0.51,0.219 10 false *4 (*A) 2.542,4.427 2.854,4.583 0.313,0.156 10 false *5 4.698,4.167 5.01,4.323 0.313,0.156 10 false *6 6.458,3.667 6.969,3.865 0.51,0.198 10 false *7 (*B) 3.979,0.042 4.479,0.219 0.5,0.177 10 false *8 (*B) 3.979,0.24 4.448,0.427 0.469,0.188 10 false *9 (*C) 2.792,0.417 3.375,0.625 0.583,0.208 10 false *10 (*A)
*A Except Models Compliant with EURO 5 Emission Regulations *B Models with Dual Fuel Tank
*C Except Models with Dual Fuel Tank - -
*1 Common-rail Assembly *2 Injector Assembly
*3 Supply Pump Assembly *4 Fuel Cooler Assembly
*5 Fuel Filter *6 Fuel Tank Sub-assembly
*7 Fuel Sub Tank Sub-assembly *8 Fuel Suction Tube with Pump and Gauge Assembly
·

Fuel Pump

·

Jet Pump

·

Fuel Sender Gauge


*9 Fuel Suction Tube with Pump and Gauge Assembly
·

Fuel Sender Gauge


*10 Fuel Cooler Assembly


Models Compliant with EURO 5 Emission Regulations
W133118C01
1.927,1.563 3.302,1.229 true 2.177,2.375 3.469,1.792 true 4.698,1.531 5.573,1.635 true 1.927,0.229 2.24,0.385 0.313,0.156 10 false *a 1.667,1.521 1.979,1.677 0.313,0.156 10 false *1 1.99,2.365 2.302,2.521 0.313,0.156 10 false *2 5.594,1.594 5.906,1.75 0.313,0.156 10 false *3
*1 Supply Pump Assembly *2 Exhaust Fuel Addition Injector Assembly (Bank 2)
*3 Exhaust Fuel Addition Injector Assembly (Bank 1) - -
*a Front - -




Common-rail System


a.

Except Models Compliant with EURO 5 Emission Regulations

i.

In this system, the high-pressurized fuel that is supplied by the supply pump assembly is stored in the common-rail assembly, and the ECM sends signals to the injector assemblies via the injector driver in order to control the injection timing and injection volume.

Models without Fuel Heater
W133119C01
0.208,4.396 0.417,4.042 true 0.479,3.094 0.313,2.781 true 1.031,3.198 1.073,2.854 true 5.75,1.625 6.167,1.208 true 5.073,4.479 5.323,4.625 true 5.76,4.479 6.01,4.625 true 5.729,5.125 5.948,5.354 true 5.438,2.917 5.573,2.635 true 0.104,4.417 0.417,4.573 0.313,0.156 10 false *1 0.146,2.594 0.458,2.75 0.313,0.156 10 false *2 1.01,2.677 1.323,2.833 0.313,0.156 10 false *3 1.823,5.552 2.135,5.708 0.313,0.156 10 false *4 1.625,4.75 1.938,4.906 0.313,0.156 10 false *5 2.479,3.646 2.833,3.833 0.354,0.188 10 false *6 2.146,0.677 2.458,0.833 0.313,0.156 10 false *7 4.156,0.333 4.469,0.49 0.313,0.156 10 false *8 4.167,0.99 4.479,1.146 0.313,0.156 10 false *9 3.844,1.594 4.313,1.75 0.469,0.156 10 false *10 6.208,1.115 6.677,1.271 0.469,0.156 10 false *11 5.49,2.438 5.948,2.656 0.458,0.219 10 false *12 5.375,4.573 5.844,4.729 0.469,0.156 10 false *13 3.99,4.906 4.458,5.063 0.469,0.156 10 false *14 5.99,5.365 6.458,5.521 0.469,0.156 10 false *15 4.781,5.823 5.094,5.979 0.313,0.156 10 false *a 4.792,6.188 5.104,6.344 0.313,0.156 10 false *b 4.792,6.49 5.104,6.646 0.313,0.156 10 false *c 6.052,4.615 6.521,4.771 0.469,0.156 10 false *13
*1 Supply Pump Assembly *2 Fuel Temperature Sensor
*3 SCV *4 Fuel Tank Sub-assembly
*5 Fuel Filter *6 Fuel Cooler Assembly (Air-cooled Type)
*7 ECM *8 No. 1 Injector Driver
*9 No. 2 Injector Driver *10 Common-rail Assembly (RH)
*11 Fuel Pressure Sensor *12 Fuel Cooler Assembly (Water-cooled Type)
*13 Injector Assembly *14 Common-rail Assembly (LH)
*15 Pressure Limiter - -
*a High Pressure Fuel *b Return Fuel
*c Suctioned Fuel - -




b.

Models Compliant with EURO 5 Emission Regulations

i.

In this system, the high-pressurized fuel that is supplied by the supply pump assembly is stored in the common-rail assembly, and the ECM sends signals to the injector assemblies via the injector driver in order to control the injection timing and injection volume.


ii.

A common-rail assembly with the fuel pressure discharge valve and piezo type injector assembly with maximum injection pressure of 200 MPa are used to improve driveability and reduce Noise and Vibration (NV).

W133120C01
0.354,4.198 0.542,3.865 true 0.625,3.052 0.417,2.677 true 1.083,3.146 1.156,2.792 true 5.833,1.729 6.292,1.396 true 3.615,4.177 3.698,4.073 true 4.042,4.198 4.125,4.094 true 5.344,4.198 5.51,4.323 true 5.979,4.208 6.146,4.333 true 2.792,4.667 2.688,4.313 true 5.896,5.219 5.792,4.865 true 0.198,4.198 0.51,4.354 0.313,0.156 10 false *1 0.313,2.5 0.625,2.656 0.313,0.156 10 false *2 1.104,2.604 1.417,2.76 0.313,0.156 10 false *3 1.76,5.26 2.073,5.417 0.313,0.156 10 false *4 1.583,4.531 1.896,4.688 0.313,0.156 10 false *5 1.865,4.521 2.302,4.698 0.438,0.177 10 false *6 (*A) 2.208,0.688 2.521,0.844 0.313,0.156 10 false *7 4.188,0.323 4.5,0.479 0.313,0.156 10 false *8 4.167,0.969 4.479,1.125 0.313,0.156 10 false *9 4.125,1.677 4.594,1.833 0.469,0.156 10 false *10 6.323,1.292 6.792,1.448 0.469,0.156 10 false *11 3.417,4.156 3.885,4.313 0.469,0.156 10 false *12 5.552,4.313 6.021,4.469 0.469,0.156 10 false *13 2.552,4.115 3.021,4.271 0.469,0.156 10 false *14 4.198,4.656 4.667,4.813 0.469,0.156 10 false *15 5.781,5.25 6.25,5.406 0.469,0.156 10 false *16 1.802,5.885 2.271,6.042 0.469,0.156 10 false : *a 3.844,4.188 4.313,4.344 0.469,0.156 10 false *12 6.177,4.313 6.646,4.469 0.469,0.156 10 false *13 1.813,6.208 2.281,6.365 0.469,0.156 10 false : *b 3.979,5.896 4.448,6.052 0.469,0.156 10 false : *c 3.979,6.198 4.448,6.354 0.469,0.156 10 false : *d
*A Models with Fuel Heater - -
*1 Supply Pump Assembly *2 Fuel Temperature Sensor
*3 SCV *4 Fuel Tank Sub-assembly
*5 Fuel Filter *6 Fuel Heater
*7 ECM *8 No. 1 Injector Driver
*9 No. 2 Injector Driver *10 Common-rail Assembly (RH)
*11 Fuel Pressure Sensor *12 Exhaust Fuel Addition Injector Assembly
*13 Injector Assembly *14 Fuel Pressure Discharge Valve
*15 Common-rail Assembly (LH) *16 Pressure Limiter
*a High Pressure Fuel *b Return Fuel
*c Suctioned Fuel *d Fuel to Exhaust Fuel Addition Injector Assembly





Supply Pump


a.

General

i.

The supply pump assembly consists of an inner cam (eccentric cam), outer cam (polygon ring), and 3 plungers, Suction Control Valve (SCV) and a feed pump. Each plunger is placed outside of the outer cam.


ii.

A fuel feeding pipe is provided on the supply pump assembly to supply fuel to the exhaust fuel addition injector assembly. The function, structure and operation are the same as those of the conventional supply pump assembly.*

*: Models compliant with EURO 5 emission regulations


W133121C01
0.479,0.344 3.375,3.573 2.896,3.229 3.833,0.354 6.729,3.583 2.896,3.229 0.917,0.688 1.24,0.75 true 2.427,2.448 2.958,2.844 true 2.917,1.802 3.094,1.615 true 2.542,1.031 2.771,0.813 true 4.281,0.698 4.604,0.76 true 5.813,2.458 6.344,2.854 true 5.948,1.042 6.177,0.823 true 0.51,0.365 0.823,0.542 0.313,0.177 12 false *A: 3.875,0.385 4.24,0.594 0.365,0.208 12 false *B: 0.698,0.594 0.917,0.823 0.219,0.229 10 false *1 2.99,2.802 3.302,2.958 0.313,0.156 10 false *2 3.073,1.448 3.385,1.604 0.313,0.156 10 false *3 2.823,0.688 3.135,0.844 0.313,0.156 10 false *4 4.063,0.604 4.281,0.833 0.219,0.229 10 false *1 6.354,2.854 6.667,3.01 0.313,0.156 10 false *2 6.198,0.677 6.51,0.833 0.313,0.156 10 false *4
*A Models Compliant with EURO 5 Emission Regulations *B Except Models Compliant with EURO 5 Emission Regulations
*1 Fuel Temperature Sensor *2 Feed Pump
*3 Fuel Feeding Pipe *4 SCV


Supply Pump Assembly Cross Section
W133122C01
1.229,0.833 2.135,1.26 true 0.875,1.521 1.99,1.958 true 5.771,0.594 6.115,0.25 true 3.135,2.708 2.833,2.344 true 2.208,3.042 2.104,2.354 true 4.396,2.688 5.052,2.063 true 4.177,2.208 5.208,1.896 true 4.51,0.813 4.698,1.479 true 5.365,2.646 5.99,3.167 true 6.042,1.604 6.667,2.125 true 4.385,0.625 4.698,0.781 0.313,0.156 10 false *1 0.688,1.417 1,1.573 0.313,0.156 10 false *2 4.25,2.698 4.563,2.854 0.313,0.156 10 false *3 3.156,2.76 3.469,2.917 0.313,0.156 10 false *4 2.156,3.094 2.469,3.25 0.313,0.156 10 false *3 3.99,2.156 4.302,2.313 0.313,0.156 10 false *2 6.021,3.135 6.333,3.292 0.313,0.156 10 false *1 6.708,2.167 7.021,2.323 0.313,0.156 10 false *1 1.031,0.698 1.344,0.854 0.313,0.156 10 false *1 6.135,0.167 6.448,0.323 0.313,0.156 10 false *5
*1 Plunger *2 Inner Cam
*3 Outer Cam *4 Feed Pump
*5 SCV -




b.

Operation

i.

Due to the rotation of the inner cam (eccentric cam), the outer cam pushes plunger "A" upward as illustrated below. The force of the spring pulls plungers "B" and "C". As a result, plungers "B" and "C" draw fuel in, and plunger "A" pumps fuel at the same time.


ii.

The SCV controls the volume of fuel that is drawn into the plungers in accordance with the signals from the ECM.

W133123C01
0.323,1.479 0.51,1.698 true 2.104,0.906 2.406,1.094 true 2.833,1.938 2.823,2.333 true 1.677,1.583 1.927,1.906 true 2.365,1.917 2.313,2.25 true 2.865,1.323 2.542,1.573 true 0.167,1.302 0.479,1.458 0.313,0.156 10 false *1 1.885,0.813 2.198,0.969 0.313,0.156 10 false *2 2.729,2.375 3.042,2.531 0.313,0.156 10 false *3 1.531,1.406 1.844,1.563 0.313,0.156 10 false *4 2.229,2.281 2.542,2.438 0.313,0.156 10 false *5 0.99,2.323 1.302,2.479 0.313,0.156 10 false *a 2.896,1.229 3.208,1.385 0.313,0.156 10 false *6 4.146,1.5 4.458,1.656 0.313,0.156 10 false *b 5.01,0.854 5.323,1.01 0.313,0.156 10 false *: c 5.01,1.052 5.323,1.208 0.313,0.156 10 false *: d 5.01,1.281 5.323,1.438 0.313,0.156 10 false *: e
*1 SCV *2 Plunger "A"
*3 Plunger "B" *4 Plunger "C"
*5 Outer Cam *6 Inner Cam
*a Suction *b To Injector Assembly
*c Pumping Finish *d Pumping Start
*e Suction - -





Common-rail


a.

The function of the common-rail assembly is to store the fuel that has been pressurized by the supply pump assembly.


b.

The common-rail assembly is provided with a fuel pressure sensor, which detects the fuel pressure in the common-rail assembly, and a pressure limiter that mechanically relieves the pressure in case the internal pressure of the common-rail assembly rises abnormally.


c.

Internally, the common-rail assembly contains a main hole and five branch holes that intersect the main hole. Each branch hole functions as an orifice that dampens the fluctuation of the fuel pressure.


d.

A fuel pressure discharge valve is used.*


e.

The fuel pressure discharge valve regulates the fuel pressure within the fuel pressure range normally. In the fuel pressure discharge valve, the plunger opens and closes in accordance with the actuation signals from the injector driver. Thus, it regulates pressure by releasing excess pressure from the common-rail assembly.*

*: Models compliant with EURO 5 emission regulations


Except Models Compliant with EURO 5 Emission Regulations
W133124C01
5.229,0.802 6.333,1.823 1.104,1.021 5.229,2.896 6.333,3.917 1.104,1.021 5.74,1.292 6.021,1.01 true 5.74,3.354 6.021,3.073 true 1.563,1.01 1.875,1.229 true 4.833,1.896 4.635,1.563 true 2.104,3.292 1.906,2.958 true 1.844,3.542 1.844,3.99 true 1.385,0.896 1.698,1.052 0.313,0.156 10 false *1 4.813,1.948 5.125,2.104 0.313,0.156 10 false *2 1.771,2.781 2.083,2.938 0.313,0.156 10 false *3 1.771,4.021 2.083,4.177 0.313,0.156 10 false *4 0.917,1.313 1.229,1.469 0.313,0.156 10 false *a 2.115,0.385 2.427,0.542 0.313,0.156 10 false *b 3,0.385 3.313,0.542 0.313,0.156 10 false *c 1.323,4.219 1.635,4.375 0.313,0.156 10 false *d 3.292,4.313 3.604,4.469 0.313,0.156 10 false *e 2.531,0.385 2.844,0.542 0.313,0.156 10 false *b 3.448,0.396 3.76,0.552 0.313,0.156 10 false *b 3.875,0.396 4.188,0.552 0.313,0.156 10 false *b 2.406,4.313 2.719,4.469 0.313,0.156 10 false *b 2.844,4.323 3.156,4.479 0.313,0.156 10 false *b 3.75,4.354 4.063,4.51 0.313,0.156 10 false *b 4.177,4.354 4.49,4.51 0.313,0.156 10 false *b 2.958,0.885 3.271,1.042 0.313,0.156 10 false A 2.938,1.698 3.25,1.854 0.313,0.156 10 false A 3.625,2.99 3.938,3.146 0.313,0.156 10 false B 3.646,3.792 3.958,3.948 0.313,0.156 10 false B 5.281,0.854 5.594,1.01 0.313,0.156 10 false *f 5.26,2.927 5.573,3.125 0.313,0.198 10 false *g 6.063,0.906 6.375,1.104 0.313,0.198 10 false *h 6.052,2.99 6.365,3.188 0.313,0.198 10 false *h
*1 Common-rail Assembly (RH) *2 Fuel Pressure Sensor
*3 Common-rail Assembly (LH) *4 Pressure Limiter
*a From Supply Pump Assembly *b To Injector Assembly
*c To Common-rail Assembly (LH) *d To Fuel Tank Sub-assembly (Excess Pressure)
*e From Common-rail Assembly (RH) *f A - A Cross Section
*g B - B Cross Section *h Branch Hole


Models Compliant with EURO 5 Emission Regulations
W133125C01
5.208,0.792 6.365,1.823 1.156,1.031 5.208,2.833 6.365,3.865 1.156,1.031 5.729,1.323 6,1.063 true 5.729,3.375 6,3.115 true 1.875,1.271 1.625,0.875 true 4.906,1.927 4.656,1.531 true 1.594,2.99 1.344,2.594 true 0.875,3.833 1.063,3.51 true 4.833,3.958 4.688,3.583 true 1.469,0.729 1.781,0.885 0.313,0.156 10 false *1 4.854,1.969 5.167,2.125 0.313,0.156 10 false *2 1.229,2.406 1.542,2.563 0.313,0.156 10 false *3 0.708,3.906 1.021,4.063 0.313,0.156 10 false *4 0.969,1.333 1.281,1.49 0.313,0.156 10 false *a 2.167,0.365 2.479,0.521 0.313,0.156 10 false *b 2.979,0.344 3.292,0.5 0.313,0.156 10 false *c 0.792,2.646 1.104,2.802 0.313,0.156 10 false *d 2.625,4.313 2.938,4.469 0.313,0.156 10 false *e 5.25,0.844 5.563,1 0.313,0.156 10 false *f 5.24,2.875 5.531,3.083 0.292,0.208 10 false *g 6.031,0.917 6.344,1.073 0.313,0.156 10 false *h 2.552,0.365 2.865,0.521 0.313,0.156 10 false *b 3.354,0.385 3.667,0.542 0.313,0.156 10 false *b 3.771,0.385 4.083,0.542 0.313,0.156 10 false *b 1.792,4.313 2.104,4.469 0.313,0.156 10 false *b 2.25,4.302 2.563,4.458 0.313,0.156 10 false *b 3.073,4.344 3.385,4.5 0.313,0.156 10 false *b 3.49,4.333 3.802,4.49 0.313,0.156 10 false *b 6.052,2.99 6.365,3.146 0.313,0.156 10 false *h 4.781,4 5.094,4.156 0.313,0.156 10 false *5 2.5,0.875 2.813,1.031 0.313,0.156 10 false A 2.49,1.646 2.802,1.802 0.313,0.156 10 false A 2.969,3.01 3.281,3.167 0.313,0.156 10 false B 2.969,3.781 3.281,3.938 0.313,0.156 10 false B 4.125,2.615 4.438,2.771 0.313,0.156 10 false *d
*1 Common-rail Assembly (RH) *2 Fuel Pressure Sensor
*3 Common-rail Assembly (LH) *4 Pressure Limiter
*5 Fuel Pressure Discharge Valve - -
*a From Supply Pump Assembly *b To Injector Assembly
*c To Common-rail Assembly (LH) *d To Fuel Tank Sub-assembly (Excess Pressure)
*e From Common-rail Assembly (RH) *f A - A Cross Section
*g B - B Cross Section *h Branch Hole


Fuel Pressure Discharge Valve Cross Section
W133126

HINT:
·

Fuel pressure sensor has its sealing portion plastic-deformed in order to keep sealing performance, so do not reuse it after disassembling.

·

The fuel pressure sensor and pressure limiter are supplied as a set with the common-rail assembly.

·

Do not disassemble the pressure limiter.

·

Do not disassemble the fuel pressure discharge valve.

·

If parts that affect the alignment have been changed, make sure to replace the pipe with a new one as well. The parts that require the replacement of a pipe are listed below.

-

Injection Pipe: Injector Assembly, Common-rail Assembly, Cylinder Head and Intake Manifold

-

Fuel Inlet Pipe: Supply Pump Assembly, Common-rail Assembly, Cylinder Head and Intake Manifold


·

For details, refer to the Repair Manual.





Injector


a.

Except Models Compliant with EURO 5 Emission Regulations

i.

General

1.

The injector assembly consists of a nozzle needle, piston and solenoid valve.

2.

An injector compensation value and QR (Quick Response) code containing encoded characteristics of the injector assembly are printed on each injector assembly.

3.

The injector compensation value and QR code contain various pieces of information regarding the injector assembly, such as model code, injection volume correction and injection timing correction values.

W133127C01
3.042,0.792 3.625,0.99 true 3.021,1.854 3.615,1.958 true 3.021,3.385 3.615,3.333 true 2.844,0.24 3.427,0.438 true 2.833,0.667 3.146,0.823 0.313,0.156 10 false *2 2.823,1.76 3.135,1.917 0.313,0.156 10 false *3 2.802,3.323 3.115,3.479 0.313,0.156 10 false *4 2.615,0.177 2.927,0.333 0.313,0.156 10 false *1
*1 Injector Assembly *2 Solenoid Valve
*3 Piston *4 Nozzle Needle



HINT:
·

If the ECM is replaced, use the Global TechStream (GTS) and input the injector compensation values of all 8 injector assemblies. If one of the injector assemblies is replaced, input the injector compensation value of the replaced injector assembly. Then, the proper compensation will be made so that the injection volume precision prior to the replacement will remain unchanged. For details, refer to the Repair Manual.

·

The QR code, which requires a special scan tool, is not used at TOYOTA dealers.

W133128C01
3.969,2.021 4.167,1.469 true 5.396,0.906 5.865,0.458 true 3.854,2.094 4.167,2.25 0.313,0.156 10 false *1 5.885,0.365 6.198,0.521 0.313,0.156 10 false *2
*1 QR Code *2 Injector Compensation Value


·

What is Quick Response (QR) Code?:

-

QR code, a matrix symbology consisting of an array of nominally square cells, allows omni-directional, high-speed reading of large amounts of data.

-

QR code encodes many types of date such as numeric, alphanumeric, kanji, kana and binary code. A maximum of 7,089 characters (numeric) can be encoded.

-

QR code (2D code) contains information in the vertical and horizontal direction, whereas a bar code contains data in one direction only. QR code (2D code) holds a considerably greater volume of information than a bar code.





ii.

Operation

(A): When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.

(B): The orifice of the control chamber opens, allowing the fuel to flow out.

(C): The fuel pressure in the control chamber drops.

(D): Simultaneously, fuel flows from the orifice to the bottom of the piston and raises the piston up (to enhance response).

(E): As a result, the piston raises the nozzle needle to inject fuel.

W133189C01
1.458,0.208 1.906,0.354 true 1.479,0.479 2.125,0.49 true 1.5,0.813 2.281,0.802 true 1.521,1.625 2.25,1.542 true 1.573,2.469 2.281,2.271 true 4.75,0.792 5.604,0.542 true 4.75,0.979 5.75,1.01 true 4.75,1.177 5.771,1.396 true 4.76,2.063 5.438,2.26 true 5.052,1.781 5.729,1.979 true 4.063,2.521 4.563,2.219 true 2.49,1.146 3.208,0.688 true 1.25,0.115 1.563,0.271 0.313,0.156 10 false *1 1.26,0.427 1.573,0.583 0.313,0.156 10 false *2 1.271,0.74 1.583,0.896 0.313,0.156 10 false *3 1.302,1.573 1.615,1.729 0.313,0.156 10 false *4 1.354,2.448 1.667,2.604 0.313,0.156 10 false *5 1.281,1.104 1.594,1.26 0.313,0.156 10 false *a 3.25,0.625 3.563,0.781 0.313,0.156 10 false *b 5.635,0.469 5.948,0.625 0.313,0.156 10 false (A) 5.865,1.323 6.177,1.479 0.313,0.156 10 false (C) 5.844,0.938 6.156,1.094 0.313,0.156 10 false (B) 5.792,1.896 6.104,2.052 0.313,0.156 10 false (D) 5.479,2.229 5.792,2.385 0.313,0.156 10 false (E) 3.865,2.51 4.177,2.667 0.313,0.156 10 false (E) 3.656,1.073 3.969,1.229 0.313,0.156 10 false *a
*1 Injector Assembly *2 Solenoid Coil
*3 Solenoid Valve *4 Piston
*5 Nozzle Needle - -
*a Fuel *b Control Chamber





b.

Models Compliant with EURO 5 Emission Regulations

i.

General

1.

8 piezo type injector assemblies are used. Each injector assembly consists of a nozzle needle, 2 pistons, a three-way valve and a piezo actuator.

2.

An injector compensation value and QR (Quick Response) code containing encoded characteristics of the injector assembly are printed on each injector assembly.

3.

The injector compensation value and QR code contain various pieces of information regarding the injector assembly, such as model code, injection volume correction and injection timing correction values.

W133129C01
2.969,0.49 3.448,0.594 true 3.031,1.719 3.51,1.823 true 3.042,2.26 3.521,2.365 true 3.031,2.521 3.51,2.521 true 3.083,2.771 3.531,2.688 true 3.563,3.208 3.969,3.281 true 2.781,0.406 3.094,0.563 0.313,0.156 10 false *1 2.833,1.615 3.146,1.771 0.313,0.156 10 false *2 2.844,2.167 3.156,2.323 0.313,0.156 10 false *3 2.823,2.427 3.135,2.583 0.313,0.156 10 false *4 2.896,2.74 3.208,2.896 0.313,0.156 10 false *5 4,3.229 4.313,3.385 0.313,0.156 10 false *6
*1 Injector Assembly *2 Piezo Actuator
*3 No. 1 Piston *4 No. 2 Piston
*5 Three-way Valve *6 Nozzle Needle



HINT:
·

If the ECM is replaced, use the Global TechStream (GTS) and input the injector compensation values of all 8 injector assemblies. If one of the injector assemblies is replaced, input the injector compensation value of the replaced injector assembly. Then, the proper compensation will be made so that the injection volume precision prior to the replacement will remain unchanged. For details, refer to the Repair Manual.

·

The QR code, which requires a special scan tool, is not used at TOYOTA dealers.

W133190C01
3.625,1.802 3.927,1.281 true 4.927,0.979 5.281,0.698 true 3.5,1.865 3.813,2.021 0.313,0.156 10 false *1 5.344,0.552 5.656,0.708 0.313,0.156 10 false *2
*1 QR Code *2 Injector Compensation Value


·

What is Quick Response (QR) Code?:

-

QR code, a matrix symbology consisting of an array of nominally square cells, allows omni-directional, high-speed reading of large amounts of data.

-

QR code encodes many types of date such as numeric, alphanumeric, kanji, kana and binary code. A maximum of 7,089 characters (numeric) can be encoded.

-

QR code (2D code) contains information in the vertical and horizontal direction, whereas a bar code contains data in one direction only. QR code (2D code) holds a considerably greater volume of information than a bar code.





ii.

Operation

(A): When current is applied to the piezo actuator, the No. 1 piston, No. 2 piston and three-way valve are pushed down.

(B): The orifice on the upper part of the three-way valve opens and the fuel in the control chamber flows out.

(C): The fuel pressure in the control chamber drops.

(D): As a result, the nozzle needle is pushed up due to fuel pressure, causing fuel injection.

(E): Current to the piezo actuator is shut off and the No. 1 and No. 2 pistons and the three-way valve are pushed up due to spring tension.

(F): The orifice on the upper part of the three-way valve closes to stop fuel flow.

(G): The fuel pressure in the control chamber rises.

(H): As a result, the nozzle needle goes down to stop fuel injection.

W102699C03
2.521,2.344 1.802,2.26 true 2.083,0.625 2.542,0.365 true 1.927,2.51 2.521,2.792 true 1.854,2.958 2.531,3.156 true 1.802,1.49 2.521,1.188 true 1.802,1.833 2.521,1.521 true 5.094,2.281 5.813,1.969 true 4.375,2.792 5.063,2.583 true 4.333,1.979 5.052,2.167 true 5.083,1.552 5.802,1.25 true 5.094,1.875 5.813,1.563 true 5.208,2.396 5.823,2.302 5.823,2.302 5.188,2.573 true 1.219,0.344 1.51,0.594 true 1.208,0.667 1.729,0.969 true 1.219,1.25 1.74,1.396 true 1.188,1.646 1.729,1.813 true 1.188,1.969 1.781,2.094 true 1.24,2.365 1.708,2.281 true 1.844,2.552 1.26,2.729 true 1.292,3.323 1.844,3.135 true 5.135,2.844 5.792,2.802 true 1,0.208 1.167,0.385 0.167,0.177 10 false *1 2.563,0.24 2.781,0.417 0.219,0.177 10 false (B) 5.854,1.135 6.073,1.313 0.219,0.177 10 false (E) 4.146,1.875 4.365,2.052 0.219,0.177 10 false (F) 5.854,1.458 6.073,1.635 0.219,0.177 10 false (E) 5.854,1.885 6.073,2.063 0.219,0.177 10 false (E) 5.854,2.719 6.073,2.896 0.219,0.177 10 false (H) 5.854,2.198 6.073,2.375 0.219,0.177 10 false (G) 2.542,2.698 2.76,2.875 0.219,0.177 10 false (C) 2.563,3.083 2.781,3.26 0.219,0.177 10 false (D) 1,0.552 1.167,0.729 0.167,0.177 10 false *2 1.99,0.146 2.156,0.323 0.167,0.177 10 false *a 2.438,0.865 2.604,1.042 0.167,0.177 10 false *b 5.719,0.865 5.885,1.042 0.167,0.177 10 false *b 1.01,1.167 1.177,1.344 0.167,0.177 10 false *3 1.021,1.552 1.188,1.729 0.167,0.177 10 false *4 1.021,1.885 1.188,2.063 0.167,0.177 10 false *5 1.042,2.313 1.208,2.49 0.167,0.177 10 false *6 1.063,2.708 1.229,2.885 0.167,0.177 10 false *7 1.083,3.281 1.25,3.458 0.167,0.177 10 false *8 4.198,2.729 4.365,2.906 0.167,0.177 10 false *7 2.563,1.052 2.781,1.229 0.219,0.177 10 false (A) 2.563,1.375 2.781,1.552 0.219,0.177 10 false (A) 2.563,2.25 2.781,2.427 0.219,0.177 10 false (A)
*1 Injector Assembly *2 Piezo Actuator
*3 No. 1 Piston *4 No. 2 Piston
*5 Orifice *6 Three-way Valve
*7 Control Chamber *8 Nozzle Needle
*a Return Fuel *b Fuel from Common-rail assembly






Fuel Tank


a.

General

i.

The multi-layer plastic fuel tank sub-assembly consists of 6 layers of 4 types of materials, one of which is a recyclable material to address environmental concerns.


ii.

A jet pump, which automatically transfers fuel from the fuel sub tank sub-assembly to the fuel tank sub-assembly, and a fuel pump, which drives the jet pump, are provided in the fuel tank sub-assembly.*

*: Models with dual fuel tank


Cross Section of Fuel Tank
W131387C01
1.854,0.719 2.417,0.802 true 1.854,1.125 2.417,0.969 true 4.729,1.25 5.167,1.531 true 4.76,1.146 5.208,1.146 true 4.771,0.896 5.219,0.813 true 4.75,0.604 5.167,0.427 true 1.625,0.615 1.938,0.771 0.313,0.156 10 false *1 5.198,1.542 5.51,1.698 0.313,0.156 10 false *2 5.26,1.073 5.573,1.229 0.313,0.156 10 false *3 1.635,1.042 1.948,1.198 0.313,0.156 10 false *1 5.292,0.719 5.604,0.875 0.313,0.156 10 false *4 5.219,0.333 5.531,0.49 0.313,0.156 10 false *2 3.5,0.292 3.813,0.448 0.313,0.156 10 false *a 3.5,1.323 3.813,1.479 0.313,0.156 10 false *b
*1 Adhesive *2 High Density Polyethylene
*3 Recyclable Material *4 Ethylene Vinyl Alcohol Copolymer
*a Interior of Fuel Tank *b Exterior of Fuel Tank


HINT:

A drain mark has been provided at the lowest position of the fuel tank. When dismantling (scraping) the vehicle, drain fuel by drilling holes at the drain mark.

W132285C01
4.083,1.104 3.781,0.365 true 3.646,0.177 3.958,0.333 0.313,0.156 10 false *a 3.438,2.396 3.75,2.552 0.313,0.156 10 false *b
*a Drain Mark *b View from Bottom Side





b.

Construction of Dual Fuel Tank

i.

General

·

A jet pump and fuel pump are provided in the fuel tank sub-assembly in order to automatically transfer fuel from the fuel sub tank sub-assembly to the fuel tank sub-assembly.

·

Fuel pump operation is controlled by the ECM in accordance with the actual fuel amount in the fuel tanks.

·

For the fuel filler pipe, the structure that is united right under the fuel inlet and forked into two in the middle is used in its configuration. Therefore, the driver can refuel without the need to distinguish the fuel tank sub-assembly from the fuel sub tank sub-assembly.

System Diagram
W133130C01
2.531,0.708 2.365,0.25 true 1.708,1.438 2.427,1.292 true 1.5,2.344 1.958,2.208 true 1.5,1.927 2.646,2.073 true 3.01,2.219 3.333,2.49 true 4.677,2.198 5.031,2.427 true 3.573,0.813 4.292,0.542 true 3.625,0.458 3.875,0.26 true 2.229,0.063 2.542,0.219 0.313,0.156 10 false *1 1.906,0.615 2.219,0.771 0.313,0.156 10 false *2 1.885,1.042 2.198,1.198 0.313,0.156 10 false *3 1.51,1.375 1.823,1.531 0.313,0.156 10 false *4 1.271,1.813 1.583,1.969 0.313,0.156 10 false *5 1.292,2.292 1.604,2.448 0.313,0.156 10 false *6 3.344,2.5 3.656,2.656 0.313,0.156 10 false *7 5.104,2.385 5.417,2.542 0.313,0.156 10 false *8 4.344,0.417 4.656,0.573 0.313,0.156 10 false *9 3.917,0.146 4.229,0.302 0.313,0.156 10 false *10
*1 Return Tube *2 Engine
*3 Supply Pump Assembly *4 Main Tube
*5 Fuel Pump *6 Fuel Tank Sub-assembly
*7 Jet Pump *8 Fuel Sub Tank Sub-assembly
*9 Fuel Filler Pipe *10 Fuel Inlet




ii.

Fuel Inlet

There is only one fuel filler pipe directly below the fuel inlet, which branches into two pipes at a midway point.

W132955C01
3.25,0.406 3.667,0.542 true 2.958,1.125 3.375,1.26 true 2.948,1.865 3.365,2 true 3.052,0.281 3.365,0.438 0.313,0.156 10 false *1 2.771,1.01 3.083,1.167 0.313,0.156 10 false *2 2.771,1.76 3.083,1.917 0.313,0.156 10 false *3 2.958,2.354 3.271,2.51 0.313,0.156 10 false *a 3.375,2.594 3.688,2.75 0.313,0.156 10 false *b
*1 Fuel Supply Nozzle *2 Fuel Inlet
*3 Fuel Filler Pipe - -
*a To Sub Fuel Tank Sub-assembly *b To Fuel Tank Sub-assembly




iii.

Operation

·

The fuel from the fuel pump actuates the jet pump in the fuel tank sub-assembly, in order to draw fuel from the fuel sub tank sub-assembly to the fuel tank sub-assembly.

W133131C01
2.115,0.875 1.906,0.323 true 0.844,1.896 1.813,1.688 true 0.823,2.896 2.156,2.854 true 2.76,3.073 3.427,3.313 true 0.635,3.406 1.063,3.271 true 5.208,3.156 5.875,3.396 true 1.719,0.156 2.031,0.313 0.313,0.156 10 false *1 1.052,0.802 1.365,0.958 0.313,0.156 10 false *2 1.052,1.406 1.365,1.563 0.313,0.156 10 false *3 0.677,1.833 0.99,1.99 0.313,0.156 10 false *4 0.594,2.823 0.906,2.979 0.313,0.156 10 false *5 0.458,3.427 0.771,3.583 0.313,0.156 10 false *6 3.479,3.25 3.792,3.406 0.313,0.156 10 false *7 5.969,3.365 6.125,3.521 0.156,0.156 10 false *8
*1 Return Tube *2 Engine
*3 Supply Pump Assembly *4 Main Tube
*5 Fuel Pump *6 Fuel Tank Sub-assembly
*7 Jet Pump *8 Fuel Sub Tank Sub-assembly


·

The fuel from the fuel pump passes through the orifice in the jet pump and returns to the fuel tank sub-assembly. Because the flow speed of the fuel from the fuel pump increases as it passes through the orifice, a vacuum is created near the exit of the orifice. This vacuum causes the fuel to be drawn from the fuel sub tank sub-assembly to the fuel tank sub-assembly.

W132957C01
4.292,1.354 4.708,0.938 true 3.958,1.771 4.677,1.979 true 4.781,0.792 5.094,0.948 0.313,0.156 10 false *1 3.854,0.177 4.104,0.406 0.25,0.229 10 false *b 3,0.063 3.25,0.292 0.25,0.229 10 false *a 3.844,3.604 4.115,3.771 0.271,0.167 10 false *c 4.74,1.938 5.01,2.104 0.271,0.167 10 false *d
*1 Jet Pump - -
*a From Fuel Sub Tank Sub-assembly *b From Fuel Pump
*c To Fuel Tank Sub-assembly *d Orifice






Fuel Filter


a.

General

i.

While the fuel filter element of the conventional fuel filter has been integrated with the fuel filter case, the new fuel filter consists of a separate fuel filter element and fuel filter case. A paper filter element that offers high filtering efficiency and captures the minutest particles is used.


ii.

A fuel filter warning switch, which turns ON/OFF when the internal vacuum of the filter increases, is provided in the fuel filter.


iii.

A recirculation type fuel heater is provided, in order to improve the fuel heating performance.*

*: Models for Europe and optional equipment on models for general countries


W133132C03
3.719,0.125 6.625,3.615 2.906,3.49 0.51,0.125 3.417,3.615 2.906,3.49 1.771,0.573 1.635,0.333 true 1.229,2.177 0.958,2.021 true 2.563,2.583 1.958,2.406 true 2.833,1.885 2.25,1.875 true 5.281,1.333 4.771,0.594 true 5.594,2.188 6.292,2.917 true 0.552,0.167 0.865,0.323 0.313,0.156 10 false *a 3.771,0.167 4.083,0.323 0.313,0.156 10 false *b 4.427,3.135 4.74,3.292 0.313,0.156 10 false *c 5.104,3.292 5.417,3.448 0.313,0.156 10 false *d 1.469,0.177 1.781,0.333 0.313,0.156 10 false *1 0.75,1.885 1.063,2.042 0.313,0.156 10 false *2 2.604,2.521 2.917,2.677 0.313,0.156 10 false *3 2.865,1.802 3.177,1.958 0.313,0.156 10 false *4 4.615,0.406 4.927,0.563 0.313,0.156 10 false *5 6.135,2.969 6.667,3.135 0.531,0.167 10 false *6 (*A)
*A Models with Fuel Heater - -
*1 Priming Pump *2 Fuel Filter Case
*3 Fuel Sedimenter Level Warning Switch *4 Fuel Filter Element
*5 Fuel Filter Warning Switch *6 Fuel Heater
*a Cross Section *b Top View
*c From Fuel Tank Sub-assembly *d To Supply Pump Assembly


System Diagram
W133133E01
0.615,0.156 2.323,0.427 1.708,0.271 10 false Fuel Tank Sub-assembly 2.563,0.719 3.406,1.01 0.844,0.292 10 false Fuel Heater* 1.344,1.198 2.625,1.49 1.281,0.292 10 false Fuel Filter Element 5.135,0.719 6.417,1 1.281,0.281 10 false Injector Assembly 0.438,1.667 1.99,2.198 1.552,0.531 10 false Fuel Sedimenter Level Warning Switch 2.323,1.667 3.354,2.198 1.031,0.531 10 false Fuel Filter Warning Switch 1.281,2.375 2.573,2.656 1.292,0.281 10 false Combination Meter 0.125,0.656 0.917,0.906 0.792,0.25 10 false Fuel Filter 5.177,1.917 6.698,2.198 1.521,0.281 10 false Supply Pump Assembly 5.01,2.406 6.677,2.771 1.667,0.365 10 false *: Models with fuel heate



b.

Fuel Filter Warning Switch

i.

A fuel filter warning switch, which turns ON/OFF when the internal vacuum of the filter increases, is provided in the fuel filter. This switch, which turns OFF when the internal vacuum of the fuel filter increases to a predetermined level, is connected by wire to the meter ECU.


ii.

When the meter ECU detects that the internal vacuum of the fuel filter has increased (by way of the fuel filter warning switch OFF signal), it determines that the fuel filter has become clogged. Then it illuminates the fuel system warning light*1 (or displays a message on the multi-information display*2) on the combination meter to urge the driver to replace the fuel filter. For details on fuel filter warning light control, see the body electrical section.

*1: Models with analog type combination meter

*2: Models with optitron display type combination meter


W102352E14
0.938,0.906 1.198,0.906 true 2.302,2.458 2.542,2.458 true 1.354,0.938 1.354,0.302 1.354,0.302 1.51,0.302 true 2.948,1.583 3.073,0.719 3.073,0.719 3.125,0.719 true 2.729,1.781 2.677,1.719 2.677,1.719 1.802,1.719 true 1.448,2.76 1.281,2.833 true 6.042,2.167 6.042,2.438 true 3.469,2.698 3.365,2.698 3.365,2.698 3.365,2.156 true 1.938,0.927 2.667,1.25 0.729,0.323 10 false Meter ECU 0.104,0.802 0.927,1.927 0.823,1.125 10 false Combination Meter Assembly 1.083,1.615 1.813,1.958 0.729,0.344 10 false Diaphragm 0.094,1.792 0.833,2.688 0.74,0.896 10 false From Fuel Tank Sub-assembly 3.51,2.615 4.177,3.74 0.667,1.125 10 false To Supply Pump Assembly 2.583,2.385 3.146,3 0.563,0.615 10 false Filter Element 0.573,2.823 1.24,3.323 0.667,0.5 10 false Fuel Filter Assembly 1.26,3.25 2.823,3.552 1.563,0.302 10 false - Normal Fuel Filter - 4.271,3.25 5.875,3.552 1.604,0.302 10 false - Fuel Filter Clogged Up - 1.552,0.208 3.313,0.583 1.76,0.375 10 false Fuel System Warning Light 3.188,0.625 4.24,1.417 1.052,0.792 10 false Fuel Filter Warning Switch 5.052,0.927 5.781,1.25 0.729,0.323 10 false Meter ECU 5.667,2.49 6.802,3.115 1.135,0.625 10 false Negative Pressure (Vacuum)



c.

Fuel Sedimenter Level Warning Switch

i.

When the water in the sedimenter section reaches a certain amount, the level warning switch comes ON and the fuel system warning light in the combination meter blinks*1 (or a message is displayed on the multi-information display*2).


ii.

When the fuel system warning light blinks, the buzzer in the combination meter sounds.*3


iii.

For details on fuel filter warning light control, see the body electrical section.

*1: Models with analog type combination meter

*2: Models with optitron display type combination meter

*3: Except models for Europe




d.

Fuel Heater

i.

This heater heats the fuel by recirculating the returned fuel, which becomes to have a high temperature by the fuel pumping of the supply pump assembly, to the fuel filter.


ii.

The fuel heater uses a recirculation valve (bimetal), which is mounted on the fuel return line and opens and closes in accordance with the fuel temperatures to draw return fuel to the fuel filter.


iii.

While the engine is cold, the recirculation valve inside the fuel heater will open due to the bimetal action, so the return fuel will return to the fuel filter and the fuel tank sub-assembly.


iv.

While the engine is warm, the recirculation valve will close due to the bimetal action, so all the return fuel will return to the fuel tank sub-assembly.

W133134C01
2.99,0.521 3.177,0.26 true 1.396,1.26 1.708,1.417 0.313,0.156 10 false *1 2.708,1.51 3.021,1.667 0.313,0.156 10 false *2 3.979,1.25 4.292,1.406 0.313,0.156 10 false *3 5.51,1.25 5.823,1.406 0.313,0.156 10 false *4 3.198,0.125 3.51,0.281 0.313,0.156 10 false *5 3.969,0.656 4.281,0.813 0.313,0.156 10 false *a
*1 Fuel Tank Sub-assembly *2 Fuel Filter
*3 Supply Pump Assembly *4 Injector Assembly
*5 Recirculation Type Fuel heater - -
*a Return - -





Fuel Cooler


a.

The two types of the fuel cooler assemblies are used; one is the water-cooled type, and the other is the air-cooled type. These fuel cooler assemblies, which are provided in the fuel return path, cool the return fuel that has reached a high temperature as a result of the pumping of the supply pump assembly. This prevents the reduction in fuel viscosity that is caused by the rise in fuel temperature, and improves the reliability of the fuel system.*

*: Except models compliant with EURO 5 emission regulations


Water-cooled Type Fuel Cooler
W133135C01
4.208,0.375 6.865,2.552 2.656,2.177 1.531,2.396 1.948,1.979 true 2.031,1.26 1.771,0.604 true 0.854,0.323 1.167,0.479 0.313,0.156 10 false *a 1.385,2.406 1.698,2.563 0.313,0.156 10 false *b 2.448,0.438 2.76,0.594 0.313,0.156 10 false *c 2.094,0.615 2.406,0.771 0.313,0.156 10 false *d 1.646,0.385 1.958,0.542 0.313,0.156 10 false *e 0.302,1.313 0.615,1.469 0.313,0.156 10 false A 2.729,1.885 3.042,2.042 0.313,0.156 10 false A 4.26,0.458 4.573,0.615 0.313,0.156 10 false *f
*1 Fuel Cooler Assembly - -
*a Fuel (From Left Bank) *b Fuel (From Right Bank)
*c Fuel (To Fuel Tank Sub-assembly) *d Water Out
*e Water IN *f A - A Cross Section


Air-cooled Type Fuel Cooler
W133136C01
3.656,0.531 6.885,1.76 3.229,1.229 0.604,0.625 0.969,1.104 true 0.448,0.438 0.76,0.594 0.313,0.156 10 false *1 0.594,1.583 0.906,1.74 0.313,0.156 10 false *a 0.615,1.927 0.927,2.083 0.313,0.156 10 false *b 3.677,0.573 3.99,0.729 0.313,0.156 10 false *c
*1 Fuel Cooler Assembly - -
*a From Common-rail Assembly *b To Fuel Tank Sub-assembly
*c Fuel Cooler Cross Section - -




Exhaust Fuel Addition Injector


a.

An exhaust fuel addition injector assembly is installed on each cylinder head. This injector supplies additional fuel into the exhaust port and maintains the proper catalyst temperature for the purpose of PM recovery.


b.

An exhaust fuel addition injector assembly consists of a needle valve body, a needle valve, and a solenoid valve.

W133137C01
3.042,1.229 3.677,1.167 true 3.177,2.583 3.813,2.479 true 3.208,1.948 3.885,1.885 true 2.865,1.188 3.177,1.344 0.313,0.156 10 false *1 3.021,1.875 3.333,2.031 0.313,0.156 10 false *2 2.917,2.531 3.229,2.688 0.313,0.156 10 false *3
*1 Solenoid Valve *2 Needle Valve
*3 Needle Valve Body - -