Home › General › CHASSIS › A750F AUTOMATIC TRANSMISSION
NM2660E _V1 General _054360 CHASSIS _0267093 A750F AUTOMATIC TRANSMISSION UN GENERAL/CONTROL/DETAILS F

CHASSIS  A750F AUTOMATIC TRANSMISSION  GENERAL/CONTROL/DETAILS  ELECTRONIC CONTROL SYSTEM  


GENERAL


a.

The electronic control system of the A750F automatic transmission consists of the control functions listed below.

System Function
Shift Timing Control The ECM sends current to shift solenoid valves S1, S2 or SR based on signals from various sensors in order to shift the gears.
Clutch Pressure Control
·

Controls the pressure that is applied directly to B1 brake and C1 clutch by actuating the shift solenoid valves SL1 and SL2 in accordance with the ECM signals.

·

The shift solenoid valve SLT and SL1 minutely controls the clutch pressure in accordance with the engine output and driving conditions.


Line Pressure Optimal Control Actuates the shift solenoid valve SLT to control the line pressure in accordance with information from the ECM and the operating conditions of the transmission.
Engine Torque Control Retards the engine ignition timing temporarily to improve shift feeling while upshifts or downshifts occur.
Lock-up Timing Control The ECM sends current to the shift solenoid valve SLU based on signals from various sensors and engages or disengages the lock-up.
Flex Lock-up Clutch Control Controls the shift solenoid valve SLU, provides an intermediate mode for when the lock-up clutch is between ON and OFF, increasing the operating range of the lock-up clutch to improve fuel economy.
"N" to "D" Squat Control When the shift lever is shifted from "N" to "D" position, 2nd gear is temporarily engaged before 1st to reduce vehicle squat.
"R" to "D" Squat Control When the shift lever is shifted from "R" to "D" position, 3rd gear is temporarily engaged before 1st to reduce vehicle squat.
2nd Start Control Enabling the vehicle to take off in the 2nd gear and thus make it easy to take off snowy, sandy or muddy terrain.
AI (Artificial Intelligence)-SHIFT Control Based on the signals from various sensors, the ECM determines the road conditions and the intention of the driver. Thus, an appropriate shift pattern is automatically determined, thus improving drivability.
Multi-mode Automatic Transmission The ECM appropriately controls the automatic transmission in accordance with the range position selected while the shift lever is in the S mode position.
Diagnosis When the ECM detects a malfunction, the ECM records the malfunction and memorizes the information that relates to the fault.
Fail-safe If a malfunction is detected in the sensors or solenoids, the ECM effects fail-safe control to prevent the vehicle's drivability from being affected significantly.



CONSTRUCTION


a.

The configurations of the electronic control system for the A750F automatic transmission is as shown in the following chart.

X133303E01
0.688,0.292 2.344,0.594 1.656,0.302 10 false MASS AIR FLOW METER 0.708,0.938 2.365,1.406 1.656,0.469 10 false CRANKSHAFT POSITION SENSOR 0.51,1.854 2.729,2.188 2.219,0.333 10 false THROTTLE POSITION SENSOR 0.781,2.5 2.354,3.021 1.573,0.521 10 false ACCELERATOR PEDAL POSITION SENSOR 0.635,3.323 2.365,4 1.729,0.677 10 false ENGINE COOLANT TEMPERATURE SENSOR 0.646,4.198 2.427,4.792 1.781,0.594 10 false NO. 1 ATF TEMPERATURE SENSOR 0.667,5 2.385,5.625 1.719,0.625 10 false NO. 2 ATF TEMPERATURE SENSOR 0.625,5.844 2.438,6.344 1.813,0.5 10 false PARK/NEUTRAL POSITION SWITCH 0.677,6.854 2.469,7.438 1.792,0.583 10 false TRANSMISSION CONTROL SWITCH 5.292,7.146 6.948,7.448 1.656,0.302 10 false Spark Plugs 4.917,6.542 6.573,6.844 1.656,0.302 10 false Ignition Coil (with Igniter) 5.531,6.031 6.656,6.375 1.125,0.344 10 false ESA 4.76,5.281 6.979,5.76 2.219,0.479 10 false SHIFT SOLENOID VALVE SR 4.708,4.438 6.938,4.823 2.229,0.385 10 false SHIFT SOLENOID VALVE SLU 4.74,3.604 7.063,3.99 2.323,0.385 10 false SHIFT SOLENOID VALVE SLT 4.719,2.781 6.917,3.156 2.198,0.375 10 false SHIFT SOLENOID VALVE SL2 4.719,1.958 6.854,2.292 2.135,0.333 10 false SHIFT SOLENOID VALVE SL1 4.771,1.135 7.021,1.417 2.25,0.281 10 false SHIFT SOLENOID VALVE S2 4.74,0.271 6.729,0.573 1.99,0.302 10 false SHIFT SOLENOID VALVE S1 3.406,4.031 4.094,4.625 0.688,0.594 10 false ECM 2.646,1.792 3.094,2.083 0.448,0.292 10 false VTA1 2.646,2.073 3.094,2.365 0.448,0.292 10 false VTA2 2.667,2.604 3.115,2.896 0.448,0.292 10 false VPA 2.667,2.896 3.115,3.188 0.448,0.292 10 false VPA2 2.719,1.031 3.167,1.323 0.448,0.292 10 false NE 2.708,0.24 3.156,0.531 0.448,0.292 10 false VG 4.104,0.25 4.552,0.542 0.448,0.292 10 false S1 4.104,1.073 4.552,1.365 0.448,0.292 10 false S2 4.104,1.896 4.552,2.188 0.448,0.292 10 false SL1 4.094,2.729 4.542,3.021 0.448,0.292 10 false SL2 4.083,3.563 4.531,3.854 0.448,0.292 10 false SLT 4.104,4.396 4.552,4.688 0.448,0.292 10 false SLU 4.104,5.188 4.552,5.479 0.448,0.292 10 false SR 4.073,6.156 4.583,6.563 0.51,0.406 10 false IGT1 to IGT6 4.094,6.865 4.542,7.156 0.448,0.292 10 false IGF1 2.75,6.76 3.198,7.052 0.448,0.292 10 false S 2.615,7 3.063,7.292 0.448,0.292 10 false SFTU 2.615,7.25 3.063,7.542 0.448,0.292 10 false SFTD 2.635,5.125 3.083,5.417 0.448,0.292 10 false THO2 2.646,4.281 3.094,4.573 0.448,0.292 10 false THO1 2.646,3.448 3.094,3.74 0.448,0.292 10 false THW 2.667,5.948 3.115,6.24 0.448,0.292 10 false NSW 2.635,6.229 3.052,6.635 0.417,0.406 10 false P, N, R, D

X133304E01
0.885,0.333 2.542,0.656 1.656,0.323 10 false SPEED SENSOR NT 0.833,1.229 2.49,1.552 1.656,0.323 10 false SPEED SENSOR SP2 0.833,2.104 2.49,2.427 1.656,0.323 10 false STOP LIGHT SWITCH 0.844,3 2.5,3.323 1.656,0.323 10 false 4WD CONTROL ECU 0.792,3.906 2.354,4.292 1.563,0.385 10 false TRANSFER INDICATOR SWITCH 0.635,5.104 2.917,5.448 2.281,0.344 10 false PATTERN SELECT SWITCH 5.146,0.219 6.802,0.542 1.656,0.323 10 false COMBINATION METER 5.24,0.677 6.896,1 1.656,0.323 10 false Vehicle Speed Signal 5.167,1.135 6.646,1.708 1.479,0.573 10 false Check Engine Warning Light 5.083,1.927 6.74,2.25 1.656,0.323 10 false ECT Power Indicator Light 5.167,2.323 6.823,2.646 1.656,0.323 10 false 2nd Start Indicator Light 5.104,2.729 6.76,3.052 1.656,0.323 10 false Shift Range Indicator Light 5.198,3.146 6.854,3.469 1.656,0.323 10 false S Mode Indicator Light 5.094,3.552 6.75,3.875 1.656,0.323 10 false ATF Temperature Warning Light 5.656,4.24 6.708,4.604 1.052,0.365 10 false Buzzer 3.458,2.135 5.115,2.458 1.656,0.323 10 false ECM 2.802,0.333 3.208,0.646 0.406,0.313 10 false NT 5.688,5.073 7.063,5.427 1.375,0.354 10 false DLC3 2.719,1.219 3.125,1.531 0.406,0.313 10 false SP2 2.698,2.115 3.104,2.427 0.406,0.313 10 false STP 2.792,3.01 3.198,3.323 0.406,0.313 10 false L4 2.708,4.052 3.115,4.365 0.406,0.313 10 false TFN 2.646,5.104 3.052,5.417 0.406,0.313 10 false PWR 4.208,5.344 4.615,5.656 0.406,0.313 10 false TC 4.438,4.667 5.531,4.927 1.094,0.26 10 false CAN (V Bus) 4.115,2.292 4.521,2.604 0.406,0.313 10 false CANH 4.146,1.302 4.552,1.615 0.406,0.313 10 false W 4.24,0.677 4.646,0.99 0.406,0.313 10 false SPD 2.604,5.302 3.208,5.615 0.604,0.313 10 false SNW1 4.115,2.542 4.521,2.854 0.406,0.313 10 false CANL



LAYOUT OF MAIN COMPONENTS


X133305C01
2.823,1.667 2.031,1.094 true 5.5,3.552 4.208,2.01 true 3.104,3.948 4.104,2.292 true 2.438,6.854 2.854,5.677 true 2.354,6.927 2.417,5.75 true 2.052,7.135 2.021,5.781 true 1.958,7.188 1.635,5.813 true 1.802,7.271 0.906,8.115 true 2.167,7.385 1.531,8.25 true 2.5,7.135 2.094,8.167 true 2.625,7.052 2.625,7.729 true 2.729,6.969 3.073,7.521 true 5.729,7.26 6.146,8.021 true 1.844,0.979 2.156,1.135 0.313,0.156 10 false *1 3.01,3.979 3.323,4.135 0.313,0.156 10 false *2 5.469,3.594 5.781,3.75 0.313,0.156 10 false *3 2.813,5.469 3.125,5.625 0.313,0.156 10 false *4 2.344,5.531 2.656,5.688 0.313,0.156 10 false *5 1.938,5.563 2.25,5.719 0.313,0.156 10 false *6 1.521,5.625 1.833,5.781 0.313,0.156 10 false *7 0.75,8.104 1.063,8.26 0.313,0.156 10 false *8 1.417,8.292 1.729,8.448 0.313,0.156 10 false *9 1.969,8.198 2.438,8.354 0.469,0.156 10 false *10 2.5,7.792 2.969,7.948 0.469,0.156 10 false *11 3.01,7.552 3.479,7.708 0.469,0.156 10 false *12 6.104,8.073 6.573,8.229 0.469,0.156 10 false *13
*1 ECM *2 Speed Sensor NT
*3 Speed Sensor SP2 *4 Shift Solenoid Valve S2
*5 Shift Solenoid Valve S1 *6 Shift Solenoid Valve SL1
*7 Shift Solenoid Valve SLT *8 No. 2 ATF Temperature Sensor
*9 No. 1 ATF Temperature Sensor *10 Shift Solenoid Valve SL2
*11 Shift Solenoid Valve SLU *12 Shift Solenoid Valve SR
*13 Park/Neutral Position Switch - -


X133596C02
1.333,1.063 1.677,1.365 true 1.125,4.76 2.115,4.094 true 1.5,5.354 2.375,4.146 true 2.458,5.708 3.344,4.458 true 4.01,1.979 3.823,1.552 true 5.76,1.25 5.281,1.396 true 5.667,1.021 5.198,1.198 true 4.094,0.302 3.646,0.896 true 3.625,0.26 3.302,1.229 true 1.188,0.917 1.5,1.073 0.313,0.156 10 false *1 0.969,4.75 1.281,4.906 0.313,0.156 10 false *2 1.375,5.375 1.688,5.531 0.313,0.156 10 false *3 2.344,5.729 2.656,5.885 0.313,0.156 10 false *4 5.031,6.365 5.344,6.521 0.313,0.156 10 false *5 3.969,2 4.281,2.156 0.313,0.156 10 false *6 5.792,1.167 6.104,1.323 0.313,0.156 10 false *7 5.698,0.917 6.01,1.073 0.313,0.156 10 false *8 4.083,0.135 4.396,0.292 0.313,0.156 10 false *9 3.531,0.063 4,0.219 0.469,0.156 10 false *10
*1 ECT Power Indicator Light *2 Stop Light Switch
*3 DLC3 *4 Lower Shift Lever Assembly
·

Transmission Control Switch


*5 Pattern Select Switch *6 S Mode Indicator Light
*7 2nd Start Indicator Light *8 Check Engine Warning Light
*9 Shift Range Indicator Light *10 ATF Temperature Warning Light



CONSTRUCTION AND OPERATION OF MAIN COMPONENTS


a.

No. 1 and No. 2 ATF Temperature Sensor

i.

No. 1 ATF temperature sensor is used for hydraulic pressure control. This sensor is used for revision of the pressure that is used to apply clutches and brakes in the transmission. This helps to ensure smooth shift quality.


ii.

No. 2 ATF temperature sensor is used as a basis for modifying the ECT shift timing control when the ATF temperature is high. It is also used for the ATF temperature warning light.

X133307C01
3.448,1.531 4.021,0.542 true 3.448,1.969 3.958,3.281 true 3.969,0.354 4.281,0.51 0.313,0.156 10 false *1 3.906,3.323 4.219,3.479 0.313,0.156 10 false *2 0.854,1.823 1.167,1.979 0.313,0.156 10 false *a
*1 No. 1 ATF Temperature Sensor *2 No. 2 ATF Temperature Sensor
*a Front - -




b.

Input Speed Sensor and Output Speed Sensor

i.

The A750F automatic transmission use a speed sensor NT (for NT signal) and speed sensor SP2 (for SP2 signal). Thus, the ECM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to various conditions.


ii.

These speed sensors are the pick-up coil type.

·

The speed sensor NT detects the input speed of the transmission. The clutch drum is used as the timing rotor for this sensor.

·

The speed sensor SP2 detects the speed of the output shaft. The parking gear on the rear planetary gear is used as the timing rotor for this sensor.


X133308C01
3.323,0.885 3.156,0.302 true 3.625,1.396 3.115,2.448 true 4.833,1.125 5.563,2.052 true 4.406,0.76 4.302,0.344 true 3.042,0.104 3.354,0.26 0.313,0.156 10 false *1 2.99,2.49 3.302,2.646 0.313,0.156 10 false *2 5.563,2.094 5.875,2.25 0.313,0.156 10 false *3 4.198,0.146 4.51,0.302 0.313,0.156 10 false *4
*1 Clutch Drum (Timing Rotor) *2 Speed Sensor NT
*3 Parking Gear (Timing Rotor) *4 Speed Sensor SP2




c.

Park/Neutral Position Switch

i.

The park/neutral position switch sends the P, R, N and D position signals to the ECM.

Wiring Diagram
X133597E01
1.292,0.646 1.75,0.844 0.458,0.198 10 false NSW 2.781,0.646 3.24,0.844 0.458,0.198 10 false STA 0.333,1.25 1.167,1.917 0.833,0.667 10 false From Starter Cut Relay 0.479,2.385 1.292,2.781 0.813,0.396 10 false IG1 Relay 1.292,3.552 3.375,3.927 2.083,0.375 10 false Park/Neutral Position Switch 2.708,1.229 3.167,1.427 0.458,0.198 10 false L 2.708,1.667 3.167,1.865 0.458,0.198 10 false DL 2.708,2.083 3.167,2.281 0.458,0.198 10 false NL 2.719,2.5 3.177,2.698 0.458,0.198 10 false RL 2.708,2.927 3.167,3.125 0.458,0.198 10 false PL 3.281,1.313 4.344,1.885 1.063,0.573 10 false To Starter Relay 5.135,1.979 5.708,2.385 0.573,0.406 10 false ECM 4.323,3.615 5.646,3.99 1.323,0.375 10 false CAN (V Bus) 5.604,3.583 6.979,3.875 1.375,0.292 10 false Shift Position Signal 4.771,4.292 6.51,4.573 1.74,0.281 10 false Combination Meter 4.542,4.75 6.542,4.979 2,0.229 10 false Shift Range Indicator Light 1.292,1.229 1.75,1.427 0.458,0.198 10 false B 1.396,2.313 1.854,2.51 0.458,0.198 10 false RB



d.

Transmission Control Switch

i.

The transmission control switch is installed inside the shift lever assembly to detect the shift lever position and to inform the ECM.


ii.

The transmission control switch detects whether the shift lever is in the D position or in the S mode position, and detects the operating conditions of the shift lever ("+" position or "-" position) if the S mode is selected, and sends signals to the ECM.

Wiring Diagram
X133598E01
4.458,0.292 4.688,0.74 0.229,0.448 10 false IG 5.156,0.833 7.052,1.292 1.896,0.458 10 false Transmission Control Switch 4.708,1.427 5.281,1.76 0.573,0.333 10 false S 3.323,1.438 3.906,1.792 0.583,0.354 10 false SFTD 4,1.427 4.563,1.781 0.563,0.354 10 false SFTU 2.677,0.677 4.583,1.177 1.906,0.5 10 false E 3.333,1.938 3.917,2.292 0.583,0.354 10 false SFTD 4.021,1.938 4.583,2.292 0.563,0.354 10 false SFTU 4.708,1.938 5.281,2.271 0.573,0.333 10 false S 3.875,2.49 4.458,2.844 0.583,0.354 10 false ECM 1.771,2.99 2.844,3.323 1.073,0.333 10 false CAN (V Bus) 1.354,3.979 2.802,4.385 1.448,0.406 10 false Shift Position Signal 3.76,3.104 5.844,3.458 2.083,0.354 10 false Combination Meter 3.573,3.615 5.542,3.906 1.969,0.292 10 false Shift Range Indicator Light 3.688,4.094 5.688,4.406 2,0.313 10 false S Mode Indicator Light 4.813,0.073 6.417,0.344 1.604,0.271 10 false To IG No.1 Relay




CLUTCH PRESSURE CONTROL


a.

Clutch to Clutch Pressure Control

i.

This control is used for shifting from 4th to 5th gear and from 5th to 4th gear.


ii.

The ECM actuates shift solenoid valves SL1 and SL2 in accordance with various signals. The output from these solenoid valves acts directly on control valves B1 and C1 in order to regulate the line pressure that acts on the B1 brake and C1 clutch.


iii.

As a result, high response and excellent shift characteristics have been realized.

X133311E01
1.896,0.229 2.385,0.604 0.49,0.375 10 false ECM 0.979,0.792 1.469,1.167 0.49,0.375 10 false SL1 3.198,0.802 3.688,1.177 0.49,0.375 10 false SL2 0.927,1.688 2.198,2 1.271,0.313 10 false C1 Control Valve 1.75,2.479 2.24,2.854 0.49,0.375 10 false C1 3.99,2.49 4.479,2.865 0.49,0.375 10 false B1 4.667,0.25 6.833,0.5 2.167,0.25 10 false - Speed Sensor NT 4.729,3.563 5.573,3.813 0.844,0.25 10 false 4th to 5th 4.729,4.156 5.521,4.448 0.792,0.292 10 false 5th to 4th 5.729,2.969 6.219,3.344 0.49,0.375 10 false C1 6.49,2.969 6.979,3.344 0.49,0.375 10 false B1 5.74,3.583 6.229,3.958 0.49,0.375 10 false Off 5.771,4.208 6.26,4.583 0.49,0.375 10 false On 0.448,3.781 2.021,4.177 1.573,0.396 10 false Line Pressure 3.208,1.74 4.563,2.031 1.354,0.292 10 false B1 Control Valve 6.49,4.188 6.979,4.563 0.49,0.375 10 false Off 6.479,3.573 6.969,3.948 0.49,0.375 10 false On 4.667,0.583 6.833,0.833 2.167,0.25 10 false - Speed Sensor SP2 4.667,0.917 6.833,1.167 2.167,0.25 10 false - Throttle Position Sensor 4.667,1.25 6.833,1.5 2.167,0.25 10 false - Mass Air Flow Meter 4.667,1.583 6.833,1.833 2.167,0.25 10 false - No. 1 ATF Temp. Sensor 4.667,1.917 6.833,2.167 2.167,0.25 10 false - Engine Coolant Temp. Sensor 4.667,2.25 6.833,2.5 2.167,0.25 10 false - Accelerator Pedal Sensor



b.

Clutch Pressure Optimal Control

i.

The ECM monitors the signals from various types of sensors, such as the input speed sensor, allowing shift solenoid valves SLT and SL1 to minutely control the clutch pressure in accordance with engine output and driving conditions. As a result, smooth shift characteristics are realized.

X128193E02
2.75,4.75 2.927,4.75 2.927,4.75 3.135,4.354 true 3.781,4.302 4.969,4.021 4.969,4.021 5.094,4.021 true 2.979,3.313 4.771,2.365 4.771,2.365 4.917,2.365 true 4.24,3.333 4.667,2.99 4.667,2.99 4.865,2.99 true 3.542,4.313 3.208,4.896 3.208,4.896 3.646,4.896 true 4.375,1.313 4.719,1.615 0.344,0.302 10 false ECM 1.656,0.479 2.5,1.125 0.844,0.646 10 false Target rpm Change Ratio 0.167,0.396 0.427,0.698 0.26,0.302 10 false rpm 0.115,0.917 0.469,1.656 0.354,0.74 10 false Input Shaft 0.552,1.521 2.25,1.854 1.698,0.333 10 false Practical rpm Change Ratio 1.792,1.875 2.125,2.167 0.333,0.292 10 false Time 0.094,5.26 0.667,6.417 0.573,1.156 10 false Clutch Brake Pressure 1.104,4.677 2.75,5.01 1.646,0.333 10 false Accumulator Control Valve 3.688,4.833 4.698,5.5 1.01,0.667 10 false Solenoid Valves SL1, SLT 5.135,3.969 7.073,4.281 1.938,0.313 10 false No. 1 ATF Temperature Sensor 3.875,5.542 4.708,6.188 0.833,0.646 10 false Output Shaft Torque 6.573,6.375 6.917,6.677 0.344,0.302 10 false Time 0.833,6.323 2.188,6.677 1.354,0.354 10 false Solenoid Drive Signal 5,2.292 6.25,2.625 1.25,0.333 10 false Speed Sensor NT 4.948,2.927 6.198,3.26 1.25,0.333 10 false Speed Sensor SP2




LINE PRESSURE OPTIMAL CONTROL


a.

Through the use of the shift solenoid valve SLT, the line pressure is optimally controlled in accordance with the engine torque information, as well as with the internal operating conditions of the torque converter clutch and the transmission.


b.

Accordingly, the line pressure can be controlled minutely in accordance with the engine output, traveling condition, and ATF temperature, thus realizing smooth shift characteristics and optimizing the workload of the oil pump (reducing unnecessary parasitic losses).

X128194E02
0.719,3.76 0.646,3.49 0.646,3.49 0.521,3.49 true 3.854,2.969 4.167,3.188 4.167,3.188 4.396,3.188 false 0.375,0.708 1.24,1.01 0.865,0.302 10 false Line Pressure 0.906,1.875 2.417,2.188 1.51,0.313 10 false Primary Regulator Valve 1.875,2.677 2.438,3.333 0.563,0.656 10 false Fluid Pressure 2.667,3.313 3.188,3.615 0.521,0.302 10 false Current 0.125,3.406 0.5,3.708 0.375,0.302 10 false Pump 3.083,4.135 4.365,4.792 1.281,0.656 10 false Shift Solenoid Valve SLT 2.031,3.771 3.104,4.115 1.073,0.344 10 false Throttle Pressure 4.438,3.115 5.792,3.5 1.354,0.385 10 false Solenoid Drive Signal 5.042,0.438 6.448,0.781 1.406,0.344 10 false Throttle Valve Opening 5.042,0.792 6.198,1.115 1.156,0.323 10 false Intake Air Volume 5.042,1.156 6.823,1.5 1.781,0.344 10 false Engine Coolant Temperature 5.042,1.521 6,1.854 0.958,0.333 10 false Engine Speed 5.042,1.875 5.906,2.177 0.865,0.302 10 false Input Speed 5.042,2.25 6.167,2.604 1.125,0.354 10 false ATF Temperature 5.042,2.615 5.917,2.917 0.875,0.302 10 false Shift Position 4.229,1.333 4.667,1.75 0.438,0.417 10 false ECM



FLEX LOCK-UP CLUTCH CONTROL


a.

In the low-to-mid-speed range, this flex lock-up clutch control regulates the shift solenoid valve SLU to provide an intermediate mode between the ON/OFF operation of the lock-up clutch in order to improve the energy transmitting efficiency in this range.


b.

As a result, the operating range of the lock-up clutch has been increased and fuel economy has been improved. The flex lock-up clutch control operates in the 3rd, 4th and 5th gears in the D position and S5 range, 4th gears in the S4 range.

i.

Even when the vehicle is decelerating (the accelerator pedal is released), the flex lock-up clutch control operates. Therefore, fuel-cut area of the engine has been expanded and fuel-economy has been improved.

X128196E02
2.979,4.208 3.219,3.677 3.219,3.677 3.323,3.677 true 3.302,5.49 3.031,5.49 3.031,5.49 3.406,4.958 true 2.615,5.365 2.771,5.365 2.771,5.365 3.083,4.99 true 5.042,5.396 4.885,5.396 4.885,5.396 3.583,4.948 true 1.135,2.677 1.365,2.677 1.365,2.677 1.563,3.094 true 2.021,1.677 2.25,1.677 2.25,1.677 2.281,2.01 false 0.99,4.469 1.094,4.469 1.094,4.469 1.083,4.031 true 5.167,4.135 5.438,4.135 false 4.99,4.615 5.406,4.615 false 6.052,1.177 5.948,1.729 5.948,1.729 5.74,1.729 false 5.948,1.083 5.844,0.188 5.844,0.188 6.01,0.188 false 0.531,1.448 0.292,0.875 0.292,0.875 0.438,0.875 false 3.198,0.25 3.542,0.552 0.344,0.302 10 false ECM 0.5,0.792 1.719,1.458 1.219,0.667 10 false Engine Coolant Temperature Signal 0.583,2.604 1.135,3.74 0.552,1.135 10 false Throttle Position Sensor 0.052,4.333 0.948,5.521 0.896,1.188 10 false Engine Coolant Temperature Sensor 2.698,2.438 3.521,3.177 0.823,0.74 10 false Engine Speed Signal 3.531,2.469 4.281,3.542 0.75,1.073 10 false Input Speed Sensor Signal 5.469,4.521 6.979,4.917 1.51,0.396 10 false ATF Temperature Signal 5.49,4.031 6.875,4.417 1.385,0.385 10 false Linear Solenoid Signal 6.729,3.5 7.094,3.802 0.365,0.302 10 false Time 5.74,3.01 7.135,3.354 1.396,0.344 10 false Linear Solenoid Signal 4.979,2.563 5.667,2.906 0.688,0.344 10 false Duty Ratio 6.167,1.625 7.083,1.958 0.917,0.333 10 false Vehicle Speed 4.844,1.635 5.708,2.333 0.865,0.698 10 false Input Turbine Speed Signal 6.052,0.115 6.927,0.729 0.875,0.615 10 false Engine Speed Signal 5.229,0.375 5.677,1.083 0.448,0.708 10 false Engine Speed 1.229,5.26 2.583,5.583 1.354,0.323 10 false Lock-up Control Valve 3.354,5.406 4.99,5.708 1.635,0.302 10 false Shift Solenoid Valve SLU 5.094,5.323 7.031,5.646 1.938,0.323 10 false No. 1 ATF Temperature Sensor 3.375,3.604 4.167,4.24 0.792,0.635 10 false Speed Sensor NT 0.573,1.604 2.021,1.938 1.448,0.333 10 false Throttle Position Signal

X128197E01
1.208,0.563 1.573,0.896 0.365,0.333 10 false Large 2.135,0.688 3.729,1.031 1.594,0.344 10 false : Lock-up operating range 0.542,1.75 1.583,2.438 1.042,0.688 10 false Throttle Opening Angle 5.323,3.188 5.688,3.521 0.365,0.333 10 false High 3.271,3.188 4.229,3.542 0.958,0.354 10 false Vehicle Speed 2.135,1.406 4.823,1.76 2.688,0.354 10 false : Flex lock-up operating range (deceleration) 2.135,1.052 4.823,1.417 2.688,0.365 10 false : Flex lock-up operating range (acceleration)

Flex Lock-up Operation Gears in Each Range

x: Off

○: Operates

Range Gear Acceleration Flex Lock-up Deceleration Flex Lock-up
D, S5 1st X X
2nd X X
3rd ○ X
4th ○ ○
5th ○ ○
S4 1st X X
2nd X X
3rd X X
4th X ○




AI (Artificial Intelligence) - SHIFT Control


a.

General

i.

The AI-SHIFT control includes a road condition support control and a driver's intention support control.


ii.

The AI-SHIFT control determines optimal transmission control based on input signals and automatically changes the shift pattern. As a result, a high caliber of transmission operation is achieved.

·

AI-SHIFT control is effect only with the shift lever in the D position, based on the accelerator and brake operation data. AI-SHIFT control will be canceled when the driver selects the S mode.

X128200E01
0.563,0.219 1.385,0.573 0.823,0.354 10 true Input Signals 2.271,0.635 2.854,0.958 0.583,0.323 10 true AI-SHIFT 2.406,0.938 3.354,1.281 0.948,0.344 10 true Road Condition 2.417,3.031 3.427,3.365 1.01,0.333 10 true Driver's Intention 3.031,1.24 4.385,1.563 1.354,0.323 10 true Uphill/Downhill Driving 0.563,0.708 1.427,1.063 0.865,0.354 10 true Sensor Signal 0.385,3.125 1.583,3.438 1.198,0.313 10 true Calculated by ECM 5.99,0.375 6.958,1.146 0.969,0.771 10 false Basic Shift Pattern Control 5.99,1.906 6.958,2.677 0.969,0.771 10 false Road Condition Support Control 6,3.646 7.021,4.438 1.021,0.792 10 false Driver's Intention Support Control 3.167,1.531 4.25,1.875 1.083,0.344 10 false Estimating Grade 2.469,1.927 2.844,2.25 0.375,0.323 10 false Small 4.188,2.104 4.563,2.396 0.375,0.292 10 false Large 2.771,2.24 4.177,2.552 1.406,0.313 10 false : Criterion acceleration 2.771,2.573 4.063,2.885 1.292,0.313 10 false : Actual acceleration 2.354,3.427 3.365,4.073 1.01,0.646 10 false - Acceleration Pedal Operation 2.354,4.063 3.521,4.365 1.167,0.302 10 false - Vehicle Condition 3.99,3.656 5.031,4.292 1.042,0.635 10 false Estimating Driver's Intention 0.531,1.063 1.49,1.688 0.958,0.625 10 false - Throttle Valve Opening Angle 0.552,2.406 1.635,2.75 1.083,0.344 10 false - Brake Signal 0.531,1.688 1.531,2.031 1,0.344 10 false - Vehicle Speed 0.531,2.042 1.51,2.385 0.979,0.344 10 false - Engine Speed 0.365,3.5 1.635,3.844 1.271,0.344 10 false Vehicle Acceleration




b.

Road Condition Support Control

i.

Under road condition support control, the ECM identifies throttle valve opening angle and the vehicle speed to determine whether the vehicle is being driven uphill or downhill.

1.

To achieve an optimal drive force while driving uphill, this control prevents the transmission from up-shifting to 4th or 5th gear.

2.

To achieve an optimal engine braking effect while driving downhill, this control automatically downshifts the transmission to 4th or 3rd gear.

X133312E02
0.76,2.573 1.219,2.771 0.458,0.198 10 false 5th 1.292,2.563 1.75,2.76 0.458,0.198 10 false 4th 1.708,2.563 2.167,2.76 0.458,0.198 10 false 5th 2.052,2.563 2.51,2.76 0.458,0.198 10 false 3rd 2.396,2.563 2.854,2.76 0.458,0.198 10 false 5th 3.177,3.344 3.635,3.542 0.458,0.198 10 false 4th 3.094,2.552 5.177,2.979 2.083,0.427 10 true 5th (Driver needs to apply brakes) 0.76,3.323 1.219,3.521 0.458,0.198 10 false 5th 5.958,2.417 6.948,2.677 0.99,0.26 10 false without Control 1.51,3.333 1.969,3.531 0.458,0.198 10 false 4th 2.052,3.333 2.51,3.531 0.458,0.198 10 false 3rd 4.25,3.344 4.708,3.542 0.458,0.198 10 false 3rd 4.74,3.344 5.198,3.542 0.458,0.198 10 false 4th 5.24,3.354 5.698,3.552 0.458,0.198 10 false 5th 5.958,3.188 6.885,3.375 0.927,0.188 10 false with Control 2.771,2.552 3.229,2.75 0.458,0.198 10 false 4th




c.

Driver's Intention Support Control

i.

This control estimates the driver's intention based on the accelerator operation and vehicle condition and selects a shift pattern that is well-suited to each driver.




MULTI-MODE AUTOMATIC TRANSMISSION


a.

General

i.

A multi-mode automatic transmission is designed to allow the driver to switch the gear ranges (a multi-mode transmission is not for manually selecting single gears). After shifting the shift lever to the S mode position and moving the shift lever to the "+" position or to the "-" position, the driver can select the desired shift range. Thus, the driver is able to shift gears with a manual-like feel.

System Diagram
X133599E01
5.427,6.375 5.125,6.375 5.125,6.375 5,5.75 true 1.052,0.74 2.469,1.052 1.417,0.313 10 false Combination Meter 0.813,1.208 2.635,1.615 1.823,0.406 10 false Shift Range Indicator Light 0.958,1.656 2.375,1.99 1.417,0.333 10 false S Mode Indicator Light 3.635,3.167 5.052,3.479 1.417,0.313 10 false ECM 0.604,2.219 2.021,2.531 1.417,0.313 10 false CAN (V Bus) 3.271,0.969 4.219,1.917 0.948,0.948 10 false Shift-up Signal ("+" Position) 4.104,0.333 6.365,0.635 2.26,0.302 10 false Transmission Control Switch 4.375,0.969 5.49,1.594 1.115,0.625 10 false Shift-down Signal ("-" Position) 5.5,0.979 6.552,1.448 1.052,0.469 10 false S Mode Position Signal 3.354,3.75 4.417,4.344 1.063,0.594 10 false Ignition Advance Control 4.75,3.729 5.406,5.01 0.656,1.281 10 false Fluid Pressure Control Signals 5.51,3.708 6.51,4.76 1,1.052 10 false Solenoid Valve Control Signals 5.49,6.302 7.094,6.677 1.604,0.375 10 false Automatic Transmission 3.125,5.375 4.542,5.688 1.417,0.313 10 false Engine



b.

Operation

i.

The driver selects the S mode position by engaging the shift lever. At this time, the shift range position selects the 4th range. (During AI-SHIFT control, the shift range that has the currently controlled gear position as the maximum usable gear position will be displayed.) Then, the shift range positions change one at a time, as the driver moves the shift lever to the front ("+" position) or to the rear ("-" position).


ii.

Under this control, the ECM effects optimal shift control within the usable gear range that the driver has selected. As with an ordinary automatic transmission, it shifts to the 1st gear when the vehicle is stopped.


iii.

Holding the transmission control switch in the "+" position with the shift lever in the S mode position will change the shift range to the 5th range regardless of range position (1st to 4th).


iv.

When the shift lever is in the S mode position, the S mode indicator light in the combination meter illuminates. The shift range indicator light indicates the state of the shift range position that the driver has selected.

X133314E01
4,3.51 5.667,3.844 1.667,0.333 10 false Shift Pattern 3.177,3.146 4.26,3.448 1.083,0.302 10 false S Mode Position 1.438,4.448 3.104,4.781 1.667,0.333 10 false Transition of Shift Ranges 1.635,5.313 3.302,5.646 1.667,0.333 10 false : Default Shift Range

Usable Gear Chart
Shift Range Shift Range Indicator Light Indication Usable Gears
5th 5 5th←→4th←→3rd←→2nd←→1st
4th 4 4th←→3rd←→2nd←→1st
3rd 3 3rd←→2nd←→1st
2nd 2 2nd←→1st
1st 1 1st




DIAGNOSIS


a.

When the ECM detects a malfunction, it makes a diagnosis and memorizes the failed section. Furthermore, the ECM illuminates or blinks the MIL in the combination meter assembly to inform the driver.


b.

The ECM will also store the Diagnostic Trouble Codes (DTCs) of the malfunctions. The DTCs can be read by connecting a Global TechStream (GTS) to the DLC3.


c.

For details, refer to the Repair Manual.



FAIL-SAFE


a.

The fail-safe function minimizes the loss of operability when any abnormality occurs in a sensor or solenoid.

Fail-safe Control List
Malfunction Part Function
Speed Sensor NT During a speed sensor NT malfunction, shift control is effected based on the speed sensor SP2 signal.
During a speed sensor NT malfunction, up-shifts to 5th, AI-SHIFT and flex lock-up clutch control are prohibited.
Speed Sensor SP2 During a speed sensor SP2 malfunction, shift control is effected based on the speed sensor NT signal.
During a speed sensor SP2 malfunction, up-shifts to 5th, AI-SHIFT and flex lock-up clutch control are prohibited.
No. 1 ATF Temperature Sensor During a No. 1 ATF temperature sensor malfunction, up-shifts to 5th and flex lock-up clutch control are prohibited.
Shift Solenoid Valve S1, S2, and SR When a shift solenoid valve listed at left malfunctions, current to the failed solenoid valve is cut off.
Shift control is changed to a fail-safe mode to shift gears using the shift normal solenoid valves to allow continued driving. Refer to the table on the next page for operation example.
Shift Solenoid Valve SL1 and SL2 During a shift solenoid valve SL1 or SL2 malfunction, up-shifts to 5th and flex lock-up clutch control are prohibited.
Shift Solenoid Valve SLU During a shift solenoid valve SLU malfunction, the current to the solenoid valve is stopped. Because this stops lock-up control and flex lock-up control, fuel economy decreases.
Shift Solenoid Valve SLT During a shift solenoid valve SLT malfunction, the current to the solenoid valve is stopped. Because this stops line pressure optimal control, the shift shock will increase. However, shifting is effected based on normal clutch pressure control.

Position Normal
Shift Solenoid Valve Gear
S1 S2 SR SL1 SL2
D, S5 On Off Off Off On 1st
On On Off Off On 2nd
Off On Off Off On 3rd
Off Off Off Off On 4th
Off Off On On Off 5th
S4 On Off Off Off On 1st
On On Off Off On 2nd
Off On Off Off On 3rd
Off Off Off Off On 4th
S3 On Off Off Off On 1st
On On Off Off On 2nd
Off On Off Off Off 3rd (E/B)
S2 On Off Off Off On 1st
On On On Off Off 2nd (E/B)
S1 On Off Off Off Off 1st (E/B)

Example
Position Shift Solenoid Valve S1 Malfunction
Shift Solenoid Valve Gear
S1 S2 SR SL1 SL2

E/B: Engine braking

D, S5 X Off → On Off Off On 4th → 3rd
X On Off Off On 3rd
X On Off Off On 3rd
X Off Off Off On 4th
X Off On On Off 5th
S4 X Off → On Off Off On 4th → 3rd
X On Off Off On 3rd
X On Off Off On 3rd
X Off Off Off On 4th
S3 X Off → On Off Off On → Off 4th → 3rd (E/B)
X On Off Off On → Off 4th → 3rd (E/B)
X On Off Off Off 3rd (E/B)
S2 X Off Off Off On 1st
X On On Off Off 3rd (E/B)
S1 X Off Off Off Off 1st (E/B)