Home › General › CHASSIS › AB60F AUTOMATIC TRANSMISSION
NM2660E _V1 General _054360 CHASSIS _0267094 AB60F AUTOMATIC TRANSMISSION UN GENERAL/CONTROL/DETAILS F

CHASSIS  AB60F AUTOMATIC TRANSMISSION  GENERAL/CONTROL/DETAILS  ATF FILLING PROCEDURE  


ATF FILLING PROCEDURE


a.

An ATF filling procedure is used in order to improve the accuracy of the ATF level when the transmission is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.

i.

This filling procedure uses a refill plug, overflow plug, No. 2 ATF temperature sensor and shift position indicator light "D".

X131614C01
0.781,3.344 0.938,2.5 true 4.219,2.708 4.781,3.24 true 1.313,1.469 1.625,1.667 0.313,0.198 10 false *1 0.677,3.354 0.99,3.552 0.313,0.198 10 false *a 4.792,3.25 5.104,3.448 0.313,0.198 10 false *2
*1 Refill Plug *2 Overflow Plug
*a Proper Level in ATF Filling Mode - -


HINT:

For details about the ATF filling procedures, see the Repair Manual.