Home › General › CHASSIS › AB60F AUTOMATIC TRANSMISSION
NM2660E _V1 General _054360 CHASSIS _0267094 AB60F AUTOMATIC TRANSMISSION UN GENERAL/CONTROL/DETAILS F

CHASSIS  AB60F AUTOMATIC TRANSMISSION  GENERAL/CONTROL/DETAILS  ELECTRONIC CONTROL SYSTEM  


GENERAL


a.

The electronic control system of the AB60F automatic transmissions consists of the control functions listed below.

Control Function
Shift Timing Control The ECM sends current to shift solenoid valves S1, S2, S3, S4 or SR based on signals from various sensors, in order to shift the gears.
Clutch Pressure Control
·

Controls the pressure that is applied directly to B2 brake and C3 clutch by actuating the linear solenoid valves SL1 and SL2 in accordance with the ECM signals.

·

The shift solenoid valve SLT and SL1 minutely controls the clutch pressure in accordance with the engine output and driving conditions.


Line Pressure Optimal Control Actuates the shift solenoid valve SLT to control the line pressure in accordance with information from the ECM and the operating conditions of the transmission.
Engine Torque Control Reduces the injection quantity temporarily to improve shift feeling while upshifts or downshifts occur.
Lock-up Timing Control The ECM sends current to the shift solenoid valve SLU based on signals from various sensors and engages or disengages the lock-up clutch.
Flex Lock-up Clutch Control Controls the shift solenoid valve SLU, provides an intermediate mode for when the lock-up clutch is between ON and OFF, increasing the operating range of the lock-up clutch to improve fuel economy.
"N" to "D" Squat Control When the shift lever is shifted from "N" to "D" position, 2nd gear is temporarily engaged before 1st to reduce vehicle squat.
"R" to "D" Squat Control When the shift lever is shifted from "R" to "D" position, 3rd gear is temporarily engaged before 1st to reduce vehicle squat.
2nd Start Control Enabling the vehicle to take off in the 2nd gear and thus make it easy to take off snowy, sandy or muddy terrain.
Coast Downshift Control To prevent engine speed from decreasing and thereby maintain fuel cut, the ECM performs downshifts before fuel cut ends.
AI (Artificial Intelligence) -SHIFT Control Based on the signals from various sensors, the ECM determines the road conditions and the intention of the driver. While the pattern select switch is in POWER, the shift pattern is biased toward sporty driving. Thus, an appropriate shift pattern is automatically determined, thus improving drivability.
Multi-mode Automatic Transmission The ECM appropriately controls the automatic transmission in accordance with the range position selected while the shift lever is in the S mode position.
Diagnosis When the ECM detects a malfunction, the ECM records the malfunction and memorizes the information that relates to the fault.
Fail-safe If a malfunction is detected in the sensors or solenoids, the ECM effects fail-safe control to prevent the vehicle's drivability from being affected significantly.



CONSTRUCTION


a.

The configurations of the electronic control system for the AB60F automatic transmission is as shown in the following chart.

Models with 1VD-FTV Engine
X133325E01
0.667,0.24 2.406,0.625 1.74,0.385 10 false MASS AIR FLOW METER 0.667,1.052 2.333,1.458 1.667,0.406 10 false CRANKSHAFT POSITION SENSOR 0.729,2.083 2.354,2.49 1.625,0.406 10 false ACCELERATOR PEDAL POSITION SENSOR 0.688,3.146 2.448,3.781 1.76,0.635 10 false ENGINE COOLANT TEMPERATURE SENSOR 0.646,4.198 2.448,4.594 1.802,0.396 10 false NO. 1 ATF TEMPERATURE SENSOR 0.646,5.24 2.438,5.688 1.792,0.448 10 false NO. 2 ATF TEMPERATURE SENSOR 0.656,7.469 2.448,7.885 1.792,0.417 10 false TRANSMISSION CONTROL SWITCH 0.625,6.281 2.427,6.688 1.802,0.406 10 false PARK/NEUTRAL POSITION SWITCH 4.76,0.229 6.813,0.615 2.052,0.385 10 false SHIFT SOLENOID VALVE S1 4.75,0.698 6.781,1.104 2.031,0.406 10 false SHIFT SOLENOID VALVE S2 4.75,1.188 6.75,1.594 2,0.406 10 false SHIFT SOLENOID VALVE S3 4.76,1.667 6.833,2.031 2.073,0.365 10 false SHIFT SOLENOID VALVE S4 4.698,2.135 6.76,2.521 2.063,0.385 10 false SHIFT SOLENOID VALVE SL1 4.698,2.615 6.833,3 2.135,0.385 10 false SHIFT SOLENOID VALVE SL2 4.74,3.094 6.948,3.5 2.208,0.406 10 false SHIFT SOLENOID VALVE SR 4.719,3.573 6.969,3.948 2.25,0.375 10 false SHIFT SOLENOID VALVE SLT 4.698,4.052 6.885,4.438 2.188,0.385 10 false SHIFT SOLENOID VALVE SLU 4.573,4.813 5.26,5.917 0.688,1.104 10 false No. 1 INJECTOR DRIVER 4.573,6.771 5.24,7.729 0.667,0.958 10 false No. 2 INJECTOR DRIVER 5.615,4.531 6.844,4.917 1.229,0.385 10 false No. 1 INJECTOR 5.615,4.979 6.792,5.396 1.177,0.417 10 false No. 4 INJECTOR 5.615,5.438 6.781,5.813 1.167,0.375 10 false No. 6 INJECTOR 5.604,5.875 6.823,6.313 1.219,0.438 10 false No. 7 INJECTOR 5.604,6.479 6.76,6.896 1.156,0.417 10 false No. 2 INJECTOR 5.594,6.927 6.75,7.292 1.156,0.365 10 false No. 3 INJECTOR 5.594,7.375 6.865,7.771 1.271,0.396 10 false No. 5 INJECTOR 5.583,7.844 6.917,8.229 1.333,0.385 10 false No. 8 INJECTOR 3.406,3.063 4.073,3.646 0.667,0.583 10 false ECM 2.604,0.208 3.271,0.792 0.667,0.583 10 false VG 2.615,1.198 3.281,1.781 0.667,0.583 10 false NE 2.604,2.229 3.271,2.813 0.667,0.583 10 false VPA 2.594,3.26 3.26,3.844 0.667,0.583 10 false THW 2.594,4.313 3.26,4.896 0.667,0.583 10 false THO1 2.594,5.344 3.26,5.927 0.667,0.583 10 false THO2 2.594,6.385 3.26,6.969 0.667,0.583 10 false NSW 2.635,6.625 3.083,7.24 0.448,0.615 10 false P, R, N, D 2.594,7.594 3.26,8.177 0.667,0.583 10 false SFTU 2.604,7.833 3.271,8.417 0.667,0.583 10 false SFTD 4.208,8.094 4.875,8.677 0.667,0.583 10 false INF2 4.104,7.813 4.771,8.396 0.667,0.583 10 false # 8 4.104,7.365 4.771,7.948 0.667,0.583 10 false # 5 4.094,6.927 4.76,7.51 0.667,0.583 10 false # 3 4.094,6.49 4.76,7.073 0.667,0.583 10 false # 2 4.188,6.125 4.854,6.708 0.667,0.583 10 false INJF 4.115,5.865 4.781,6.448 0.667,0.583 10 false # 7 4.115,5.427 4.781,6.01 0.667,0.583 10 false # 6 4.104,4.969 4.771,5.552 0.667,0.583 10 false # 4 4.104,4.51 4.771,5.094 0.667,0.583 10 false # 1 4.104,4.042 4.771,4.625 0.667,0.583 10 false SLU 4.094,3.563 4.76,4.146 0.667,0.583 10 false SLT 4.094,3.083 4.76,3.667 0.667,0.583 10 false SR 4.094,2.604 4.76,3.188 0.667,0.583 10 false SL2 4.083,2.115 4.75,2.698 0.667,0.583 10 false SL1 4.083,1.656 4.75,2.24 0.667,0.583 10 false S4 4.094,1.156 4.76,1.74 0.667,0.583 10 false S3 4.094,0.688 4.76,1.271 0.667,0.583 10 false S2 4.094,0.229 4.76,0.813 0.667,0.583 10 false S1 2.604,2.469 3.271,3.052 0.667,0.583 10 false VPA2 2.75,7.354 3.417,7.938 0.667,0.583 10 false S

X133326E01
0.875,0.615 2.479,0.958 1.604,0.344 10 false SPEED SENSOR NT 0.792,1.51 2.396,1.854 1.604,0.344 10 false SPEED SENSOR SP2 0.833,2.396 2.438,2.74 1.604,0.344 10 false STOP LIGHT SWITCH 0.833,3.302 2.438,3.646 1.604,0.344 10 false 4WD CONTROL ECU 0.75,4.083 2.354,4.729 1.604,0.646 10 false TRANSFER INDICATOR SWITCH 0.594,6.667 2.656,7.031 2.063,0.365 10 false PATTERN SELECT SWITCH 5.615,6.615 6.344,7.083 0.729,0.469 10 false DLC3 5.552,5.313 6.375,5.698 0.823,0.385 10 false Buzzer 5,4.604 6.667,4.958 1.667,0.354 10 false ATF Temperature Warning Light*2 4.99,4.188 6.729,4.531 1.74,0.344 10 false S Mode Indicator Light*2 4.896,3.813 6.865,4.167 1.969,0.354 10 false Shift Range Indicator Light*2 5.042,3.406 6.646,3.75 1.604,0.344 10 false 2nd Start Indicator Light 4.99,3.021 6.594,3.365 1.604,0.344 10 false ECT Power Indicator Light 5.073,2.615 6.677,2.958 1.604,0.344 10 false Master Warning Light*1 4.979,1.635 6.958,1.969 1.979,0.333 10 false Multi-information Display*1 4.906,1.094 6.792,1.448 1.885,0.354 10 false Check Engine Warning Light 5.094,0.615 6.698,0.958 1.604,0.344 10 false Vehicle Speed Signal 5.021,0.167 6.625,0.51 1.604,0.344 10 false COMBINATION METER 3.396,2.979 4.167,3.573 0.771,0.594 10 false ECM 4.813,1.938 6.792,2.271 1.979,0.333 10 false - Shift Range Indicator 4.813,2.25 6.792,2.583 1.979,0.333 10 false - ATF Temp. Warning Indicator 2.594,0.615 3.365,1.208 0.771,0.594 10 false NT 2.583,1.51 3.354,2.104 0.771,0.594 10 false SP2 2.583,2.406 3.354,3 0.771,0.594 10 false STP 2.594,3.302 3.365,3.896 0.771,0.594 10 false L4 2.583,4.25 3.354,4.844 0.771,0.594 10 false TFN 2.635,6.646 3.406,7.24 0.771,0.594 10 false PWR 4.063,2.875 4.833,3.469 0.771,0.594 10 false CANH 4.229,1.073 5,1.667 0.771,0.594 10 false W 4.208,0.625 4.979,1.219 0.771,0.594 10 false SPD 2.615,6.865 3.385,7.458 0.771,0.594 10 false SNW1 4.427,5.958 5.833,6.438 1.406,0.479 10 false CAN (V Bus) 4.188,6.906 4.958,7.5 0.771,0.594 10 false TC 4.063,3.135 4.833,3.729 0.771,0.594 10 false CANL 0.469,7.146 4.781,7.49 4.313,0.344 10 false *1: Only for models with optitron type combination meter 0.469,7.406 4.344,7.729 3.875,0.323 10 false *2: Only for models with analog type combination meter

Models with 1UR-FE or 3UR-FE Engine
X131649E03
2.708,0.167 3.031,0.365 0.323,0.198 10 false VG 2.667,1.917 3.125,2.115 0.458,0.198 10 false VTA1 2.667,2.156 3.115,2.396 0.448,0.24 10 false VTA2 2.719,1.042 3.031,1.24 0.313,0.198 10 false NE 0.625,0.208 2.438,0.542 1.813,0.333 10 false MASS AIR FLOW METER 0.74,0.948 2.438,1.552 1.698,0.604 10 false CRANKSHAFT POSITION SENSOR 0.49,1.979 2.583,2.313 2.094,0.333 10 false THROTTLE POSITION SENSOR 0.813,2.719 2.365,3.333 1.552,0.615 10 false ACCELERATOR PEDAL POSITION SENSOR 0.719,3.656 2.375,4.271 1.656,0.615 10 false ENGINE COOLANT TEMP ERATURE SENSOR 0.656,4.594 2.448,5.24 1.792,0.646 10 false NO. 1 ATF TEMPERATURE SENSOR 0.667,5.542 2.458,6.177 1.792,0.635 10 false NO. 2 ATF TEMPERATURE SENSOR 0.656,6.479 2.479,7.083 1.823,0.604 10 false PARK/NEUTRAL POSITION SWITCH 0.615,7.521 2.365,8.281 1.75,0.76 10 false TRANSMISSION CONTROL SWITCH 2.625,3.042 3.073,3.302 0.448,0.26 10 false VPA2 2.656,2.813 3.052,3.031 0.396,0.219 10 false VPA 2.667,3.75 3.042,3.948 0.375,0.198 10 false THW 2.656,4.677 3.094,4.885 0.438,0.208 10 false THO1 2.646,5.615 3.083,5.823 0.438,0.208 10 false THO2 2.656,6.563 3.063,6.781 0.406,0.219 10 false NSW 2.635,6.813 3.031,7.417 0.396,0.604 10 false P, R, N, D 2.698,7.688 3.125,7.875 0.427,0.188 10 false SFTU 2.708,7.927 3.115,8.125 0.406,0.198 10 false SFTD 4.135,7.354 4.542,7.646 0.406,0.292 10 false IGF2 4.115,6.708 4.542,7.125 0.427,0.417 10 false IGT 2, 3, 5, 8 5.083,6.896 6.333,7.542 1.25,0.646 10 false IGNITION COIL with IGNITER 5.229,7.563 6.219,7.854 0.99,0.292 10 false No. 2, 3, 5, 8 5.177,8.031 6.292,8.333 1.115,0.302 10 false SPARK PLUGS 5.146,5.708 6.344,6.01 1.198,0.302 10 false SPARK PLUGS 5.24,5.229 6.313,5.5 1.073,0.271 10 false No. 1, 4, 6, 7 5.073,4.573 6.313,5.198 1.24,0.625 10 false IGNITION COIL with IGNITER 4.135,5.031 4.531,5.302 0.396,0.271 10 false IGF1 4.104,4.417 4.552,4.813 0.448,0.396 10 false IGT 1, 4, 6, 7 5.51,4.177 6.052,4.458 0.542,0.281 10 false ESA 4.708,3.677 6.792,3.979 2.083,0.302 10 false SHIFT SOLENOID VALVE SLU 4.729,3.25 6.823,3.573 2.094,0.323 10 false SHIFT SOLENOID VALVE SLT 4.708,2.813 6.792,3.104 2.083,0.292 10 false SHIFT SOLENOID VALVE SLU 4.698,2.385 6.844,2.719 2.146,0.333 10 false SHIFT SOLENOID VALVE SL2 4.729,1.948 6.813,2.26 2.083,0.313 10 false SHIFT SOLENOID VALVE SL1 4.76,1.521 6.771,1.833 2.01,0.313 10 false SHIFT SOLENOID VALVE S4 4.75,1.083 6.74,1.417 1.99,0.333 10 false SHIFT SOLENOID VALVE S3 4.76,0.219 6.729,0.563 1.969,0.344 10 false SHIFT SOLENOID VALVE S1 4.75,0.646 6.958,1.031 2.208,0.385 10 false SHIFT SOLENOID VALVE S2 4.094,0.167 4.365,0.365 0.271,0.198 10 false S1 4.094,0.594 4.365,0.792 0.271,0.198 10 false S2 4.083,1.031 4.375,1.25 0.292,0.219 10 false S3 4.094,1.469 4.375,1.667 0.281,0.198 10 false S4 4.094,1.896 4.427,2.094 0.333,0.198 10 false SL1 4.083,2.323 4.417,2.542 0.333,0.219 10 false SL2 4.083,2.75 4.365,2.969 0.281,0.219 10 false SR 4.104,3.177 4.438,3.396 0.333,0.219 10 false SLT 4.094,3.625 4.427,3.844 0.333,0.219 10 false SLU 5.229,6.01 6.302,6.281 1.073,0.271 10 false No. 1, 4, 6, 7 5.521,6.5 6.063,6.781 0.542,0.281 10 false ESA 5.219,8.344 6.208,8.635 0.99,0.292 10 false No. 2, 3, 5, 8 2.865,7.427 3.083,7.635 0.219,0.208 10 false S 3.385,3.188 3.823,3.49 0.438,0.302 10 false ECM

X133326E01
0.875,0.615 2.479,0.958 1.604,0.344 10 false SPEED SENSOR NT 0.792,1.51 2.396,1.854 1.604,0.344 10 false SPEED SENSOR SP2 0.833,2.396 2.438,2.74 1.604,0.344 10 false STOP LIGHT SWITCH 0.833,3.302 2.438,3.646 1.604,0.344 10 false 4WD CONTROL ECU 0.75,4.083 2.354,4.729 1.604,0.646 10 false TRANSFER INDICATOR SWITCH 0.594,6.667 2.656,7.031 2.063,0.365 10 false PATTERN SELECT SWITCH 5.615,6.615 6.344,7.083 0.729,0.469 10 false DLC3 5.552,5.313 6.375,5.698 0.823,0.385 10 false Buzzer 5,4.604 6.667,4.958 1.667,0.354 10 false ATF Temperature Warning Light*2 4.99,4.188 6.729,4.531 1.74,0.344 10 false S Mode Indicator Light*2 4.896,3.813 6.865,4.167 1.969,0.354 10 false Shift Range Indicator Light*2 5.042,3.406 6.646,3.75 1.604,0.344 10 false 2nd Start Indicator Light 4.99,3.021 6.594,3.365 1.604,0.344 10 false ECT Power Indicator Light 5.073,2.615 6.677,2.958 1.604,0.344 10 false Master Warning Light*1 4.979,1.635 6.958,1.969 1.979,0.333 10 false Multi-information Display*1 4.906,1.094 6.792,1.448 1.885,0.354 10 false Check Engine Warning Light 5.094,0.615 6.698,0.958 1.604,0.344 10 false Vehicle Speed Signal 5.021,0.167 6.625,0.51 1.604,0.344 10 false COMBINATION METER 3.396,2.979 4.167,3.573 0.771,0.594 10 false ECM 4.813,1.938 6.792,2.271 1.979,0.333 10 false - Shift Range Indicator 4.813,2.25 6.792,2.583 1.979,0.333 10 false - ATF Temp. Warning Indicator 2.594,0.615 3.365,1.208 0.771,0.594 10 false NT 2.583,1.51 3.354,2.104 0.771,0.594 10 false SP2 2.583,2.406 3.354,3 0.771,0.594 10 false STP 2.594,3.302 3.365,3.896 0.771,0.594 10 false L4 2.583,4.25 3.354,4.844 0.771,0.594 10 false TFN 2.635,6.646 3.406,7.24 0.771,0.594 10 false PWR 4.063,2.875 4.833,3.469 0.771,0.594 10 false CANH 4.229,1.073 5,1.667 0.771,0.594 10 false W 4.208,0.625 4.979,1.219 0.771,0.594 10 false SPD 2.615,6.865 3.385,7.458 0.771,0.594 10 false SNW1 4.427,5.958 5.833,6.438 1.406,0.479 10 false CAN (V Bus) 4.188,6.906 4.958,7.5 0.771,0.594 10 false TC 4.063,3.135 4.833,3.729 0.771,0.594 10 false CANL 0.469,7.146 4.781,7.49 4.313,0.344 10 false *1: Only for models with optitron type combination meter 0.469,7.406 4.344,7.729 3.875,0.323 10 false *2: Only for models with analog type combination meter



LAYOUT OF MAIN COMPONENTS


X133327C01
2.667,1.75 1.865,1.26 true 2.396,6.917 2.281,5.594 true 2.313,6.948 2.01,5.583 true 2.198,7.01 1.667,5.594 true 2.063,7.052 1.354,5.656 true 1.979,7.115 0.969,5.688 true 1.823,7.229 0.698,5.969 true 1.74,7.26 0.51,6.344 true 1.75,7.469 1.26,8.385 true 2.052,7.604 1.813,8.25 true 2.75,7.24 2.781,8.052 true 2.865,7.167 3.177,7.906 true 5.083,7.458 5,8.365 true 5.542,7.479 5.875,8.063 true 5.823,6.979 6.198,7.656 true 1.688,1.156 2,1.313 0.313,0.156 10 false *1 2.229,5.396 2.542,5.552 0.313,0.156 10 false *2 1.927,5.406 2.24,5.563 0.313,0.156 10 false *3 1.573,5.417 1.885,5.573 0.313,0.156 10 false *4 1.26,5.479 1.573,5.635 0.313,0.156 10 false *5 0.844,5.521 1.156,5.677 0.313,0.156 10 false *6 0.552,5.813 0.865,5.969 0.313,0.156 10 false *7 0.333,6.198 0.646,6.354 0.313,0.156 10 false *8 1.167,8.406 1.479,8.563 0.313,0.156 10 false *9 1.677,8.281 2.146,8.438 0.469,0.156 10 false *10 2.677,8.083 3.146,8.24 0.469,0.156 10 false *11 3.073,7.927 3.542,8.083 0.469,0.156 10 false *12 4.896,8.406 5.365,8.563 0.469,0.156 10 false *13 5.771,8.094 6.24,8.25 0.469,0.156 10 false *14 6.104,7.688 6.573,7.844 0.469,0.156 10 false *15
*1 ECM *2 Shift Solenoid Valve S3
*3 Shift Solenoid Valve S2 *4 Shift Solenoid Valve S4
*5 Shift Solenoid Valve S1 *6 Shift Solenoid Valve SR
*7 Shift Solenoid Valve SL1 *8 Shift Solenoid Valve SLT
*9 No. 2 ATF Temperature Sensor *10 No. 1 ATF Temperature Sensor
*11 Shift Solenoid Valve SL2 *12 Shift Solenoid Valve SLU
*13 Speed Sensor SP2 *14 Park/NeutralPosition Switch
*15 Speed Sensor NT - -


X133306C01
3.281,1.51 2.615,0.469 true 1.708,1.646 1.188,0.865 true 3.479,2.854 1.5,2.146 true 2.323,3.042 1.427,2.458 true 5.771,3.292 4.771,3.396 true 3.927,3.865 3.719,3.427 true 5.563,2.677 4.51,3.021 true 5.885,1.469 5.292,1.677 true 5.563,0.948 5.177,1.448 true 4.281,0.531 3.563,1.24 true 1.198,6.698 2.125,6.01 true 1.688,7.302 2.396,6.063 true 2.729,7.813 3.396,6.375 true 3.677,2.052 3.792,1.823 true 2.49,0.271 2.802,0.427 0.313,0.156 10 false *1 1.052,0.688 1.365,0.844 0.313,0.156 10 false *2 1.333,2.031 1.646,2.188 0.313,0.156 10 false *3 3.573,2.073 3.885,2.229 0.313,0.156 10 false *4 3.896,3.917 4.208,4.073 0.313,0.156 10 false *5 5.813,3.229 6.125,3.385 0.313,0.156 10 false *6 5.625,2.573 5.938,2.729 0.313,0.156 10 false *7 4.302,0.354 4.615,0.51 0.313,0.156 10 false *8 1.031,6.677 1.344,6.833 0.313,0.156 10 false *9 1.5,7.323 1.969,7.479 0.469,0.156 10 false *10 2.573,7.896 3.042,8.052 0.469,0.156 10 false *11 5.021,8.313 5.49,8.469 0.469,0.156 10 false *12 1.24,2.323 1.552,2.479 0.313,0.156 10 false *2 5.563,0.781 5.875,0.938 0.313,0.156 10 false *6 5.927,1.396 6.24,1.552 0.313,0.156 10 false *7
*1 ATF Temperature Warning Light *2 ECT Power Indicator Light
*3 Master Warning Light *4 S Mode Indicator Light
*5 Multi-information Display *6 Check Engine Warning Light
*7 2nd Start Indicator Light *8 Shift Range Indicator Light
*9 Stop Light Switch *10 DLC3
*11 Lower Shift Lever Assembly
·

Transmission Control Switch


*12 Pattern Select Switch



CONSTRUCTION AND OPERATION OF MAIN COMPONENTS


a.

No. 1 and No. 2 ATF Temperature Sensor

i.

No. 1 ATF temperature sensor is used for hydraulic pressure control. This sensor is used for revision of the pressure that is used to apply clutches and brakes in the transmission. This helps to ensure smooth shift quality.


ii.

No. 2 ATF temperature sensor is used as a basis for modifying the ECT shift timing control when the ATF temperature is high. It is also used for the ATF temperature warning light.

X128188C01
3.281,1.615 2.927,0.531 true 3.01,3.323 3.25,2.438 true 2.813,0.354 3.073,0.604 0.26,0.25 10 false *1 2.917,3.354 3.177,3.604 0.26,0.25 10 false *2 1.469,1.802 1.729,2.052 0.26,0.25 10 false *a
*1 No. 1 ATF Temperature Sensor *2 No. 2 ATF Temperature Sensor
*a Front - -




b.

Input Speed Sensor and Output Speed Sensor

i.

The AB60F automatic transmissions use a speed sensor NT (for NT signal) and speed sensor SP2 (for SP2 signal). Thus, the ECM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to various conditions.


ii.

These speed sensors are the pick-up coil type.

·

The speed sensor NT detects the input speed of the transmission. The clutch drum is used as the timing rotor for this sensor.

·

The speed sensor SP2 detects the speed of the output shaft. The parking gear on the rear planetary gear is used as the timing rotor for this sensor.


X133328C01
2.385,1.313 1.844,0.469 true 2.177,1.708 1.844,2.615 true 3.521,1.979 3.823,3.073 true 4.063,0.615 3.885,1.49 true 1.719,0.292 2.031,0.448 0.313,0.156 10 false *1 1.75,2.667 2.063,2.823 0.313,0.156 10 false *2 3.76,3.125 4.073,3.281 0.313,0.156 10 false *3 4.01,0.417 4.323,0.573 0.313,0.156 10 false *4
*1 Parking Gear (Timing Rotor) *2 Speed Sensor SP2
*3 Speed Sensor NT *4 C3 Clutch Drum (Timing Rotor)




c.

Park/Neutral Position Switch

i.

The park/neutral position switch sends the P, R, N and D position signals to the ECM.

Wiring Diagram
X133309E01
1.292,0.531 1.896,0.854 0.604,0.323 10 false NSW 2.781,0.594 3.479,0.99 0.698,0.396 10 false STA 3.24,1.333 4.281,1.927 1.042,0.594 10 false To Starter Relay 0.25,1.313 1.125,2.156 0.875,0.844 10 false From Starter Cut Relay 0.49,2.417 1.313,3.063 0.823,0.646 10 false IG1 Relay 1.354,3.552 3.406,3.99 2.052,0.438 10 false Park/Neutral Position Switch 1.479,2.573 1.938,2.771 0.458,0.198 10 false RB 1.563,1.479 2.021,1.677 0.458,0.198 10 false B 2.698,1.5 3.156,1.698 0.458,0.198 10 false L 2.677,1.885 3.135,2.083 0.458,0.198 10 false DL 2.688,2.302 3.146,2.5 0.458,0.198 10 false NL 2.698,2.708 3.156,2.906 0.458,0.198 10 false RL 2.708,3.146 3.167,3.344 0.458,0.198 10 false PL 4.354,3.542 5.281,3.729 0.927,0.188 10 false CAN (V Bus) 5.646,3.542 6.99,3.865 1.344,0.323 10 false Shift Position Signal 5.208,2.208 5.667,2.406 0.458,0.198 10 false ECM 4.667,4.26 6.396,4.604 1.729,0.344 10 false Combination Meter 4.5,4.75 6.365,5.021 1.865,0.271 10 false Multi-information Display*1 4.469,5.219 6.479,5.563 2.01,0.344 10 false Shift Range Indicator Light*2 0.385,4.885 3.604,5.177 3.219,0.292 10 false *1: Models with optitron type combination meter 0.385,5.24 4.021,5.49 3.635,0.25 10 false *2: Models with analog type combination meter



d.

Transmission Control Switch

i.

The transmission control switch is installed inside the shift lever assembly to detect the shift lever position and to inform the ECM.


ii.

The transmission control switch detects whether the shift lever is in the D position or in the S mode position, and detects the operating conditions of the shift lever ("+" position or "-" position) if the S mode is selected, and sends signals to the ECM.

Wiring Diagram
X133310E02
5.625,0.948 7.021,1.833 1.396,0.885 10 false Transmission Control Switch 3.792,1.594 4.292,2.073 0.5,0.479 10 false SFTD 4.5,1.573 5,2.01 0.5,0.438 10 false SFTU 4.906,0.458 5.583,0.885 0.677,0.427 10 false IG 5.146,1.583 6.542,2.469 1.396,0.885 10 false S 3.146,0.885 3.583,1.333 0.438,0.448 10 false E 4.271,2.646 5.667,3.531 1.396,0.885 10 false ECM 4.177,3.281 5.573,4.167 1.396,0.885 10 false Combination Meter 4,3.813 6.271,4.208 2.271,0.396 10 false Multi-information Display*1 3.958,4.271 6.24,4.719 2.281,0.448 10 false Shift Range Indicator Light*2 4.063,4.76 6.156,5.229 2.094,0.469 10 false S Mode Indicator Light*2 2.156,4.313 3.552,5.198 1.396,0.885 10 false Shift Position Signal 2.219,3.208 3.615,4.094 1.396,0.885 10 false CAN (V Bus) 0.25,4.979 4.125,5.302 3.875,0.323 10 false *1: Models with optitron type combination meter 0.25,5.323 4.25,5.719 4,0.396 10 false *2: Models with analog type combination meter 4.594,0.021 6.031,0.323 1.438,0.302 10 false To IG No.1 Relay 3.781,2.25 4.281,2.729 0.5,0.479 10 false SFTD 4.469,2.229 4.969,2.667 0.5,0.438 10 false SFTU 5.156,2.229 6.552,3.115 1.396,0.885 10 false S




CLUTCH PRESSURE CONTROL


a.

Clutch to Clutch Pressure Control

i.

This control is used for shifting from 5th to 6th gear and from 6th to 5th gear.


ii.

The ECM actuates shift solenoid valves SL1 and SL2 in accordance with various signals. The output from these solenoid valves acts directly on control valves B2 and C3 in order to regulate the line pressure that acts on the B2 brake and C3 clutch.


iii.

As a result, high response and excellent shift characteristics have been realized.

X128192E02
2.385,0.833 2.719,1.125 0.333,0.292 10 false ECM 1.74,1.188 2.031,1.479 0.292,0.292 10 false SL1 3.344,1.188 3.677,1.479 0.333,0.292 10 false SL2 0.594,2.552 0.927,2.844 0.333,0.292 10 false C3 3.969,2.448 4.302,2.74 0.333,0.292 10 false B2 1.802,2.615 2.625,3.271 0.823,0.656 10 false Clutch Control Valve 1.021,3.51 1.885,3.813 0.865,0.302 10 false Line Pressure 4.99,3.375 5.573,3.563 0.583,0.188 10 false 5th→6th 5.677,3.135 5.885,3.323 0.208,0.188 10 false C3 6.156,3.135 6.365,3.333 0.208,0.198 10 false B2 4.521,0.885 6.25,1.26 1.729,0.375 10 false - Speed Sensor SP2 3.469,1.719 4.375,2.333 0.906,0.615 10 false Brake Control Valve 5,3.802 5.615,3.99 0.615,0.188 10 false 6th→5th 5.677,3.385 5.896,3.698 0.219,0.313 10 false Off 6.167,3.833 6.385,4.146 0.219,0.313 10 false Off 6.146,3.396 6.365,3.708 0.219,0.313 10 false On 5.688,3.823 5.906,4.135 0.219,0.313 10 false On 4.521,0.563 6.323,0.948 1.802,0.385 10 false - Speed Sensor NT 4.531,1.208 6.396,1.521 1.865,0.313 10 false - Mass Air Flow Meter 4.521,1.542 6.552,1.844 2.031,0.302 10 false - No. 1 ATF Temperature Sensor 4.531,1.844 6.875,2.167 2.344,0.323 10 false - Engine Coolant Temperature Sensor 4.531,2.177 6.76,2.521 2.229,0.344 10 false - Accelerator Pedal Sensor 4.531,2.51 6.76,2.854 2.229,0.344 10 false - Throttle Position Sensor* 0.521,4.333 4.406,4.656 3.885,0.323 10 false *: Models with 1UR-FE or 3UR-FE engine



b.

Clutch Pressure Optimal Control

i.

The ECM monitors the signals from various types of sensors, such as the input speed sensor, allowing shift solenoid valves SLT and SL1 to minutely control the clutch pressure in accordance with engine output and driving conditions. As a result, smooth shift characteristics are realized.

X128193E03
2.75,4.75 2.927,4.75 2.927,4.75 3.135,4.354 true 3.781,4.302 4.969,4.021 4.969,4.021 5.094,4.021 true 2.979,3.313 4.771,2.365 4.771,2.365 4.917,2.365 true 4.24,3.333 4.667,2.99 4.667,2.99 4.865,2.99 true 3.542,4.313 3.208,4.896 3.208,4.896 3.646,4.896 true 4.375,1.313 4.719,1.615 0.344,0.302 10 false ECM 1.656,0.479 2.5,1.125 0.844,0.646 10 false Target rpm Change Ratio 0.167,0.396 0.427,0.698 0.26,0.302 10 false rpm 0.115,0.917 0.469,1.656 0.354,0.74 10 false Input Shaft 0.552,1.521 2.25,1.854 1.698,0.333 10 false Practical rpm Change Ratio 1.792,1.875 2.125,2.167 0.333,0.292 10 false Time 4.938,2.938 6.292,3.25 1.354,0.313 10 false Speed Sensor SP2 0.094,5.26 0.667,6.417 0.573,1.156 10 false Clutch Brake Pressure 1.104,4.677 2.75,5.01 1.646,0.333 10 false Accumulator Control Valve 3.688,4.833 4.698,5.5 1.01,0.667 10 false Shift Solenoid Valve SL1, SLT 5.135,3.969 7.073,4.281 1.938,0.313 10 false No. 1 ATF Temperature Sensor 3.875,5.542 4.708,6.188 0.833,0.646 10 false Output Shaft Torque 6.573,6.375 6.917,6.677 0.344,0.302 10 false Time 0.833,6.323 2.188,6.677 1.354,0.354 10 false Solenoid Drive Signal 5,2.292 6.25,2.625 1.25,0.333 10 false Speed Sensor NT




LINE PRESSURE OPTIMAL CONTROL


a.

Through the use of the shift solenoid valve SLT, the line pressure is optimally controlled in accordance with the engine torque information, as well as with the internal operating conditions of the torque converter clutch and the transmission.


b.

Accordingly, the line pressure can be controlled minutely in accordance with the engine output, traveling condition, and ATF temperature, thus realizing smooth shift characteristics and optimizing the workload of the oil pump (reducing unnecessary parasitic losses).

X133329E01
0.802,3.188 0.719,2.969 0.719,2.969 0.521,2.969 false 1.958,3.083 1.99,2.625 1.99,2.625 2.125,2.625 false 4,1.177 3.875,0.604 3.875,0.604 3.573,0.604 false 0.385,0.458 2.375,0.656 1.99,0.198 10 false Line Pressure 0.115,2.885 0.604,3.177 0.49,0.292 10 false Pump 1.375,4.156 3.365,4.354 1.99,0.198 10 false Fluid Pressure 2.75,4.823 4.74,5.021 1.99,0.198 10 false Current 2.156,2.563 3.438,2.792 1.281,0.229 10 false Throttle Pressure 5.354,0.427 7.125,0.802 1.771,0.375 10 false Accelerator Pedal Position 5.365,0.813 7.156,1.271 1.792,0.458 10 false Engine Coolant Temperature 5.375,1.198 6.865,1.448 1.49,0.25 10 false Engine rpm 5.365,1.573 6.854,1.823 1.49,0.25 10 false Input Speed 5.365,1.958 6.854,2.208 1.49,0.25 10 false ATF Temperature 5.365,2.344 6.854,2.594 1.49,0.25 10 false Shift Position 5.365,2.75 6.854,3 1.49,0.25 10 false Throttle Position* 5.375,3.094 6.771,3.51 1.396,0.417 10 false Intake Air Volume* 3.26,3.542 4.219,4.271 0.958,0.729 10 false Shift Solenoid Valve SLT 4.396,1.667 6.385,1.865 1.99,0.198 10 false ECM 1.156,3.375 2.302,3.896 1.146,0.521 10 false Primary Regulator Valve 0.333,5.396 4.094,5.708 3.76,0.313 10 false *: Models with 1UR-FE or 3UR-FE engine 2.25,0.542 3.792,0.948 1.542,0.406 10 false Solenoid Drive Signal



LOCK-UP TIMING CONTROL


a.

The ECM operates the lock-up timing control in order to improve the fuel consumption performance while in top gear with the shift lever in the S4 or S5 range, and in 5th or 6th gear with the shift lever in the S6 range or D position.

Lock-up Timing in D Position or S6 Range
X128195E03
3.656,0.896 4.135,0.896 4.135,0.896 4.49,1.698 true 3.229,1.406 3.708,1.406 3.708,1.406 4.396,2.677 true 0.833,0.469 1.219,0.792 0.385,0.323 10 false Large 0.083,1.583 1.25,2.281 1.167,0.698 10 false Accelerator Pedal Position 1.813,0.802 3.802,1.052 1.99,0.25 10 false 5th Lock-up Operating Range 3.375,3.354 4.292,3.698 0.917,0.344 10 false Vehicle Speed 1.396,1.333 3.406,1.604 2.01,0.271 10 false 6th Lock-up Operating Range 5.875,3.135 6.26,3.458 0.385,0.323 10 false High

Lock-up Operation Gears in Each Range

○: Available

x: Not available

-: Not applicable

*: Lock-up operation is performed when the 4th gear is help during the AI-SHIFT control or the cruise control.

Position or Range D, S6 S5 S4
Gear 1st X X X
2nd X X X
3rd X X X
4th X* X* ○
5th ○ ○ -
6th ○ - -



FLEX LOCK-UP CLUTCH CONTROL


a.

In the low-to-mid-speed range, this flex lock-up clutch control regulates the shift solenoid valve SLU to provide an intermediate mode between the ON/OFF operation of the lock-up clutch in order to improve the energy transmitting efficiency in this range.


b.

As a result, the operating range of the lock-up clutch has been increased and fuel economy has been improved. The flex lock-up clutch control operates in the 3rd, 4th, 5th and 6th gears in the D position and S6 range, 3rd, 4th and 5th gears in the S5 range, 3rd and 4th gear in the S4 range.

i.

Even when the vehicle is decelerating (the accelerator pedal is released), the flex lock-up clutch control operates. Therefore, fuel-cut area of the engine has been expanded and fuel-economy has been improved.

Models with 1VD-FTV Engine
X133330E01
0.813,4.49 0.125,5.823 0.125,5.823 0.271,5.823 false 2.813,5.438 2.188,6.427 2.188,6.427 2.021,6.427 false 3.125,5.417 2.479,6.344 2.479,6.344 2.76,6.344 false 3.302,5.417 3.781,5.99 3.781,5.99 4.177,5.99 false 2.688,4.677 3.135,4.125 3.135,4.125 4.229,4.125 false 5.313,1.229 5.115,0.344 5.115,0.344 5.365,0.344 false 5.469,1.365 5.76,2.052 5.76,2.052 5.49,2.052 false 2.802,0.552 3.896,0.833 1.094,0.281 10 false ECM 0.396,0.656 1.531,1.375 1.135,0.719 10 false Accelerator Pedal Position Signal 0.729,1.677 1.979,2.396 1.25,0.719 10 false Engine Coolant Temperature Signal 1.052,2.615 2.375,3.688 1.323,1.073 10 false Engine Speed Signal (from Crankshaft Position Sensor) 2.5,2.906 3.302,3.875 0.802,0.969 10 false Input Speed Sensor Signal 4.313,2.542 4.688,3.146 0.375,0.604 10 false Duty Ratio 4.188,0.625 4.677,1.271 0.49,0.646 10 false Engine Speed 5.438,0.281 7.083,0.635 1.646,0.354 10 false Engine Speed Signal 3.833,1.979 6.031,2.5 2.198,0.521 10 false Input Turbine Speed Signal 6.24,1.771 7.156,2.188 0.917,0.417 10 false Vehicle Speed 4.823,2.448 6.708,2.74 1.885,0.292 10 false Engine Speed Duty Ratio 5.021,3.219 6.823,3.5 1.802,0.281 10 false Linear Solenoid Signal 6.24,3.615 6.833,4.042 0.594,0.427 10 false Time 4.271,4.052 5.76,4.344 1.49,0.292 10 false Speed Sensor NT 4.219,5.906 6.49,6.219 2.271,0.313 10 false No. 1 ATF Temperature Sensor 2.813,6.26 4.969,6.635 2.156,0.375 10 false Shift Solenoid Valve SLU 0.625,6.344 2.375,6.802 1.75,0.458 10 false Lock-up Control Valve 0.354,5.729 2.115,6.229 1.76,0.5 10 false Engine Coolant Temperature Sensor 4.938,4.885 6.479,5.385 1.542,0.5 10 false Linear Solenoid Signal

Models with 1UR-FE or 3UR-FE Engine
X128196E03
2.979,4.208 3.219,3.677 3.219,3.677 3.323,3.677 true 3.281,5.531 3.021,5.531 3.021,5.531 3.406,4.958 true 2.615,5.552 2.823,5.552 2.823,5.552 3.083,4.99 true 5.042,5.396 4.885,5.396 4.885,5.396 3.583,4.948 true 1.135,2.677 1.365,2.677 1.365,2.677 1.563,3.094 true 2.021,1.677 2.25,1.677 2.25,1.677 2.281,2.01 false 0.375,5.188 0.167,5.188 0.167,5.188 1.083,4.031 true 5.167,4.135 5.438,4.135 false 4.99,4.615 5.406,4.615 false 6.052,1.177 5.948,1.729 5.948,1.729 5.74,1.729 false 5.948,1.083 5.844,0.188 5.844,0.188 6.01,0.188 false 0.531,1.448 0.292,0.875 0.292,0.875 0.438,0.875 false 3.198,0.25 3.542,0.552 0.344,0.302 10 false ECM 0.5,0.792 1.719,1.458 1.219,0.667 10 false Engine Coolant Temperature Signal 0.583,2.604 1.135,3.74 0.552,1.135 10 false Throttle Position Sensor 0.448,5.115 2.854,5.552 2.406,0.438 10 false Engine Coolant Temperature Sensor 2.698,2.438 3.521,3.177 0.823,0.74 10 false Engine Speed Signal 3.531,2.469 4.281,3.542 0.75,1.073 10 false Input Speed Sensor Signal 5.469,4.521 6.979,4.917 1.51,0.396 10 false ATF Temperature Signal 5.49,4.031 6.875,4.417 1.385,0.385 10 false Linear Solenoid Signal 6.729,3.5 7.094,3.802 0.365,0.302 10 false Time 5.74,3.01 7.135,3.354 1.396,0.344 10 false Linear Solenoid Signal 4.979,2.563 5.667,2.906 0.688,0.344 10 false Duty Ratio 6.167,1.625 7.083,1.958 0.917,0.333 10 false Vehicle Speed 4.844,1.635 5.708,2.333 0.865,0.698 10 false Input Turbine Speed Signal 6.052,0.115 6.927,0.729 0.875,0.615 10 false Engine Speed Signal 5.229,0.375 5.677,1.083 0.448,0.708 10 false Engine Speed 1.229,5.469 2.583,5.792 1.354,0.323 10 false Lock-up Control Valve 3.344,5.458 5.156,5.823 1.813,0.365 10 false Shift Solenoid Valve SLU 5.094,5.313 7.031,5.635 1.938,0.323 10 false No. 1 ATF Temperature Sensor 3.375,3.604 4.167,4.24 0.792,0.635 10 false Speed Sensor NT 0.573,1.604 2.021,1.938 1.448,0.333 10 false Throttle Position Signal

X128197E03
1.208,0.563 1.771,0.875 0.563,0.313 10 false Large 2.125,0.688 4.26,1.042 2.135,0.354 10 false : Lock-up operating range 0.521,1.75 1.677,2.427 1.156,0.677 10 false Accelerator Pedal Position 5.323,3.188 5.781,3.531 0.458,0.344 10 false High 3.271,3.188 4.406,3.542 1.135,0.354 10 false Vehicle Speed 2.135,1.406 4.979,1.76 2.844,0.354 10 false : Flex lock-up operating range (deceleration) 2.135,1.052 5.01,1.427 2.875,0.375 10 false : Flex lock-up operating range (acceleration)

Flex Lock-up Operation Gears in Each Range

○: Available

x: Not available

-: Not applicable

*: Flex Lock-up also operates, when the vehicle is decelerating

Position or Range D, S6 S5 S4
Gear 1st X X X
2nd X X X
3rd ○ ○ ○
4th ○* ○* ○*
5th ○* ○* -
6th ○* - -




COAST DOWNSHIFT CONTROL


a.

As a result of coast downshift control, downshifts are performed to maintain sufficient engine speed to avoid ending fuel cut control. Thus, fuel cut time is extended and fuel economy is achieved.

i.

In this control, the transmission downshifts from 6th to 5th and then 5th to 4th before fuel cut control ends when the vehicle is decelerated in the 6th gear, so that fuel cut control continues operating.

X131634E02
3.771,0.917 3.771,0.406 3.771,0.406 3.563,0.406 true 3.198,2.781 3.073,2.396 true 3.563,2.781 3.646,2.375 true 3.375,3.042 3.625,2.938 true 4.115,3.083 4.198,3 true 2.25,0.313 3.542,0.906 1.292,0.594 10 false Continuous Fuel Cut Control Operation 0.885,0.917 2.208,1.24 1.323,0.323 10 false Fuel Cut Control On 0.813,1.198 2.229,1.583 1.417,0.385 10 false Fuel Cut Control Off 1.698,1.802 2.146,2.74 0.448,0.938 10 false Engine Speed 2.26,2.271 2.719,2.49 0.458,0.219 10 false 6th 2.875,2.219 3.333,2.5 0.458,0.281 10 false to 5th 3.469,2.198 3.927,2.396 0.458,0.198 10 false to 4th 2.979,3 3.438,3.198 0.458,0.198 10 false to 5th 3.813,3.083 4.271,3.281 0.458,0.198 10 false to 4th 4.583,3.313 4.979,3.625 0.396,0.313 10 false Time 4.896,3 6.51,3.323 1.615,0.323 10 false Fuel Cut Control Off 4.833,2.094 6.542,2.51 1.708,0.417 10 false Fuel Cut Control On 4.979,0.427 6.792,0.729 1.813,0.302 10 false : with Downshift Control 4.99,0.698 6.865,1.063 1.875,0.365 10 false : without Downshift Control




AI-SHIFT CONTROL


a.

General

i.

The AI-SHIFT control includes a road condition support control and a driver's intention support control.


ii.

The AI-SHIFT control determines optimal transmission control based on input signals and automatically changes the shift pattern. As a result, a high caliber of transmission operation is achieved.

·

AI-SHIFT control is effect only with the shift lever in the D position, based on the accelerator and brake operation data. AI-SHIFT control will be canceled when the driver selects the S mode.


X133595E01
0.531,0.26 1.531,0.542 1,0.281 10 false Input Signals 0.51,0.865 1.51,1.146 1,0.281 10 false Sensor Signal 0.25,1.167 1.479,1.604 1.229,0.438 10 false - Accelerator Pedal Position 0.25,1.667 1.5,2.083 1.25,0.417 10 false - Vehicle Speed 0.25,1.917 1.583,2.333 1.333,0.417 10 false - Engine Speed 0.25,2.167 1.417,2.667 1.167,0.5 10 false - Brake Signal 0.25,2.417 1.26,3.031 1.01,0.615 10 false - Throttle Valve Opening Angle* 0.313,3.813 1.531,4.083 1.219,0.271 10 false Calculated by ECM 0.26,4.323 1.563,4.646 1.302,0.323 10 false Vehicle Acceleration 2.51,4.063 3.51,4.344 1,0.281 10 false Driver's Intention 2.302,4.438 3.344,4.948 1.042,0.51 10 false - Acceleration Pedal Operation 2.292,5.156 3.531,5.698 1.24,0.542 10 false - Vehicle Condition 3.896,4.729 4.948,5.448 1.052,0.719 10 false Estimating the Driver's Intention 4.552,2.51 5.552,2.792 1,0.281 10 false Large 2.302,2.438 3.302,2.719 1,0.281 10 false Small 2.729,2.75 4.625,3.073 1.896,0.323 10 false Criterion Acceleration 2.74,3.073 4.698,3.438 1.958,0.365 10 false Actual Acceleration 2.656,1.698 4.396,1.979 1.74,0.281 10 false Uphill/downhill Driving 2.438,1.385 3.438,1.667 1,0.281 10 false Road Condition 2.24,0.99 3.24,1.271 1,0.281 10 false AI-SHIFT 5.917,0.51 7.115,1.021 1.198,0.51 10 false Basic Shift Pattern Control 5.938,2.385 6.958,3.063 1.021,0.677 10 false Road Condition Support Control 5.927,4.833 6.958,5.396 1.031,0.563 10 false Driver's Intention Support Control 3.063,1.969 4.667,2.229 1.604,0.26 10 false Estimating the Grade 0.354,6.323 3.365,6.698 3.01,0.375 10 false *: Models with 1UR-FE or 3UR-FE engine



b.

Road Condition Support Control

i.

Under road condition support control, the ECM determines accelerator pedal position and the vehicle speed whether the vehicle is being driven uphill or downhill.

·

To achieve an optimal drive force while driving uphill, this control prevents the transmission from up-shifting to 4th, 5th or 6th gear.

·

To achieve an optimal engine braking effect while driving downhill, this control automatically downshifts the transmission to 5th, 4th or 3rd gear.


X133312E01
0.76,2.573 1.219,2.771 0.458,0.198 10 false 6th 1.292,2.563 1.75,2.76 0.458,0.198 10 false 4th 1.708,2.563 2.167,2.76 0.458,0.198 10 false 5th 2.052,2.563 2.51,2.76 0.458,0.198 10 false 3rd 2.396,2.563 2.854,2.76 0.458,0.198 10 false 5th 3.177,3.344 3.635,3.542 0.458,0.198 10 false 4th 3.094,2.552 5.177,2.979 2.083,0.427 10 true 5th (Driver needs to apply brakes) 5.365,2.542 5.635,2.781 0.271,0.24 10 true 6th 0.76,3.323 1.219,3.521 0.458,0.198 10 false 6th 5.531,3.344 5.99,3.542 0.458,0.198 10 false 6th 5.958,2.417 6.948,2.677 0.99,0.26 10 false without Control 1.51,3.333 1.969,3.531 0.458,0.198 10 false 4th 2.052,3.333 2.51,3.531 0.458,0.198 10 false 3rd 4.25,3.344 4.708,3.542 0.458,0.198 10 false 3rd 4.74,3.344 5.198,3.542 0.458,0.198 10 false 4th 5.24,3.354 5.698,3.552 0.458,0.198 10 false 5th 5.958,3.188 6.885,3.375 0.927,0.188 10 false with Control 2.771,2.552 3.229,2.75 0.458,0.198 10 false 4th



c.

Driver's Intention Support Control

i.

Driver's intention support control estimates the driver's intention based on the accelerator operation and vehicle condition and selects a shift pattern that is well-suited to each driver.

Control Operation Operate Gear Pattern Select Switch
Sudden Accelerator Pedal Release Control When the driver releases the accelerator quickly, this control makes it easy for the transmission to hold the gear, which improves engine braking force and re-acceleration response. 3rd to 5th ECT POWER
Sudden Deceleration Downshift Control When the driver decelerates the vehicle suddenly, this control downshifts rapidly, which improves engine braking force and re-acceleration response. 4th to 6th ECT POWER




MULTI-MODE AUTOMATIC TRANSMISSION


a.

General

i.

A multi-mode automatic transmission is designed to allow the driver to switch the gear ranges (a multi-mode transmission is not for manually selecting single gears). After shifting the shift lever to the S mode position and moving the shift lever to the "+" position or to the "-" position, the driver can select the desired shift range. Thus, the driver is able to shift gears with a manual-like feel.

System Diagram
X133313E02
5.073,5.646 4.771,6.427 4.771,6.427 5.219,6.427 false 1.063,0.281 2.688,0.594 1.625,0.313 10 false Combination Meter 0.813,0.771 2.438,1.083 1.625,0.313 10 false Multi-information Display*1 0.75,1.219 2.781,1.542 2.031,0.323 10 false Shift Range Indicator Light*2 0.865,1.667 2.49,1.979 1.625,0.313 10 false S Mode Indicator Light*2 1.729,2.208 3.354,2.521 1.625,0.313 10 false CAN (V Bus) 3.615,3.167 5.24,3.479 1.625,0.313 10 false ECM 3.313,1.51 4.271,2.292 0.958,0.781 10 false Shift-up Signal ("+" Position) 4.385,1.5 5.49,2.427 1.104,0.927 10 false Shift-down Signal ("-" Position) 5.531,1.49 6.615,2.333 1.083,0.844 10 false S Mode Position Signal 4.052,0.302 6.198,0.625 2.146,0.323 10 false Transmission Control Switch 3.333,3.688 4.458,4.333 1.125,0.646 10 false Injection Volume Control 4.75,3.656 5.375,4.979 0.625,1.323 10 false Fluid Pressure Control Signals 5.479,3.688 6.927,4.521 1.448,0.833 10 false Solenoid Valve Control Signals 3.292,5.323 4.917,5.635 1.625,0.313 10 false Engine 5.292,6.344 6.917,6.656 1.625,0.313 10 false Automatic Transmission 0.125,6.104 3.479,6.479 3.354,0.375 10 false *1: Models with optitron type combination meter 0.125,6.438 3.604,6.719 3.479,0.281 10 false *2: Models with analog type combination meter



b.

Operation

i.

The driver selects the S mode position by engaging the shift lever. At this time, the 4th or 5th range is selected according to the vehicle speed. (When the driver selects the S mode during AI-SHIFT control, the current gear will be selected as the shift range.) Then, the shift range positions change one at a time, as the driver moves the shift lever to the front ("+" position) or to the rear ("-" position).


ii.

Under this control, the ECM effects optimal shift control within the usable gear range that the driver has selected. As with an ordinary automatic transmission, it shifts to the 1st gear when the vehicle is stopped.


iii.

Holding the transmission control switch in the "+" position with the shift lever in the S mode position will change the shift range to the 6th range regardless of range position (1st to 5th).


iv.

When the shift lever is in the S mode position, the S mode indicator light in the combination meter illuminates. The shift range indicator light indicates the state of the shift range position that the driver has selected.

X128203E01
0.51,2.417 1.615,3.052 1.104,0.635 10 false Transition of Shift Range Position 0.469,4.26 1.615,4.719 1.146,0.458 9 false : Default shift range 3.656,1.188 4.719,1.51 1.063,0.323 10 false S Mode Position 4.5,2.979 5.313,3.323 0.813,0.344 10 false Shift Pattern

Usable Gear Chart
Shift Range Shift Range Indicator Light Indication Usable Gears
6th 6 6th←→5th←→4th←→3rd←→2nd←→1st
5th 5 5th←→4th←→3rd←→2nd←→1st
4th 4 4th←→3rd←→2nd←→1st
3rd 3 3rd←→2nd←→1st
2nd 2 2nd←→1st
1st 1 1st




DIAGNOSIS


a.

When the ECM detects a malfunction, it makes a diagnosis and memorizes the failed section. Furthermore, the ECM illuminates or blinks the MIL in the combination meter assembly to inform the driver.


b.

The ECM will also store the Diagnostic Trouble Codes (DTCs) of the malfunctions. The DTCs can be read by connecting a Global TechStream (GTS) to the DLC3.


c.

For details, refer to the Repair Manual.



FAIL-SAFE


a.

The fail-safe function minimizes the loss of operability when an abnormality occurs in a sensor or solenoid.

Fail-safe Control List
Malfunction Part Function
Speed Sensor NT When the speed sensor NT malfunctions, shift control is effected using the information from the speed sensor SP2 signal.
During a speed sensor NT malfunction, up-shift to the 5th, 6th, AI-SHIFT and flex lock-up clutch control are prohibited.
Speed Sensor SP2 When the speed sensor SP2 malfunctions, shift control is effected using the information from the speed sensor NT signal.
When the speed sensor SP2 malfunctions, up-shift to the 5th, 6th, AI-SHIFT and flex lock-up clutch control are prohibited.
No. 1 ATF Temperature Sensor When the No. 1 ATF temperature sensor malfunctions, up-shift to the 5th, 6th and flex lock-up clutch control are prohibited.
Shift Solenoid Valve S1, S2, S3, S4 and SR When a shift solenoid valve listed at left fails, the current to the failed solenoid valve is cut off.
Shift control is changed to a fail-safe mode to shift gears using the normal shift solenoid valves to allow continued driving. Refer to the table on the next page for an operation example.
Shift Solenoid Valve SL1 and SL2 During a shift solenoid valve SL1 or SL2 malfunction, up-shift to the 5th and 6th and flex lock-up clutch control are prohibited.
Shift Solenoid Valve SLU During a shift solenoid valve SLU malfunction, the current to the solenoid valve is stopped. Because this stops lock-up control and flex lock-up control, fuel economy decreases.
Shift Solenoid Valve SLT During a shift solenoid valve SLT malfunction, the current to the solenoid valve is stopped. Because this stops line pressure optimal control, the shift shock increases. However, shifting is effected through normal clutch pressure control.

Position Normal
Shift Solenoid Gear
S1 S2 S3 S4 SR SL1 SL2
D, S6 Off On On Off On Off On 1st
On On On Off On Off On 2nd
On Off On Off On Off On 3rd
On Off Off Off On Off On 4th
On Off Off On Off On Off 5th
On On Off On Off On Off 6th
S5 Off On On Off On Off On 1st
On On On Off On Off On 2nd
On Off On Off On Off On 3rd
On Off Off Off On Off On 4th
On Off Off On Off On Off 5th
S4 Off On On Off On Off On 1st
On On On Off On Off On 2nd
On Off On Off On Off On 3rd
On Off Off Off On Off On 4th
S3 Off On On Off On Off On 1st
On On On Off On Off On 2nd
On Off On Off On Off Off 3rd
S2 Off On On Off On Off On 1st
On On On On On Off Off 2nd
S1 Off On On Off On Off Off 1st

Example
Position Shift Solenoid Valve S1 Malfunction
Shift Solenoid Gear
S1 S2 S3 S4 SR SL1 SL2

E/B: Engine braking

D, S6 X On On Off On Off On 1st
X On → Off On → Off Off On Off On 1st → 4th
X Off On → Off Off On Off On 3rd → 4th
X Off Off Off On Off On 4th
X Off Off On Off On Off 5th
X On → Off Off On Off On Off N → 5th
S5 X On On Off On Off On 1st
X On → Off On → Off Off On Off On 1st → 4th
X Off On → Off Off On Off On 3rd → 4th
X Off Off Off On Off On 4th
X On → Off Off On Off On Off 5th
S4 X On On Off On Off On 1st
X On → Off On → Off Off On Off On 1st → 4th
X Off On → Off Off On Off On 3rd → 4th
X Off Off Off On Off On 4th
S3 X On On Off On Off On 1st
X On → Off On → Off Off On Off On 1st → 4th
X Off On → Off Off On Off Off → On 3rd (E/B) → 4th
S2 X On On Off On Off On 1st
X On → Off On → Off On On → Off Off Off → On 1st (E/B) →2nd
S1 X On On Off On Off Off 1st (E/B)