Home › General › BODY ELECTRICAL › WIPER AND WASHER SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269832 WIPER AND WASHER SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  WIPER AND WASHER SYSTEM  GENERAL/CONTROL/DETAILS  WASHER NOZZLE  


DESCRIPTION


a.

A Positive Temperature Coefficient (PTC) heater is used for the washer nozzle heater and controlled by the No. 2 main body ECU.



SYSTEM OPERATION


a.

The washer nozzle heater is activated through a signal from the No. 2 main body ECU when the outside temperature reaches 5°C or lower with the engine switch on (IG). In addition, the washer nozzle heater is turned off when the engine switch is turned off or the outside temperature reaches 6°C or higher.