Home › General › BODY ELECTRICAL › SLIDING ROOF SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269835 SLIDING ROOF SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  SLIDING ROOF SYSTEM  GENERAL/CONTROL/DETAILS  DESCRIPTION  


DESCRIPTION


a.

The settings of the sliding roof system vary depending on the destinations and grades.


b.

This system uses a single glass panel to perform tilt up-and-down and open-and-close operations.


c.

The sliding roof ECU uses 2 Hall ICs to detect the position of the sliding roof. The sliding roof ECU and the 2 Hall ICs are integrated into the sliding roof drive gear sub-assembly.