Home › General › BODY ELECTRICAL › POWER BACK DOOR SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269836 POWER BACK DOOR SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  POWER BACK DOOR SYSTEM  GENERAL/CONTROL/DETAILS  DESCRIPTION  


DESCRIPTION


a.

The power back door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the power back door opener/closer switch or the power back door button on the key. In addition, a power back door closer switch has been provided on the back door for convenience.

·

The PWR DOOR OFF switch is the main switch for this system.

·

The power back door ECU has been built into the power back door unit assembly.

·

This system, which is controlled by the power back door ECU, operates when the conditions indicated below have been met.

Engine Switch Operating Condition

*1: The state in which the switch is not pressed.

*2: The power back door can be operated if it is open.

*3: The operating condition for the opener function.

on (IG) The PWR DOOR OFF switch is on. *1
The back door is unlocked. *2, *3
Battery voltage is 10.5 V or more.
The shift lever is in the P position. *3
The vehicle speed is 3 km/h (2 mph) or less. *3
The tail gate is closed.
off The PWR DOOR OFF switch is on. *1
The back door is unlocked. *2, *3
Battery voltage is 10.5 V or more.
The tail gate is closed.