Home › General › BODY ELECTRICAL › TAIL GATE CLOSER SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269837 TAIL GATE CLOSER SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  TAIL GATE CLOSER SYSTEM  GENERAL/CONTROL/DETAILS  FUNCTION OF MAIN COMPONENTS  


FUNCTION OF MAIN COMPONENTS


Component Function
Back Door Lock Assembly LWR Tail Gate Opener & Closer Motor Locks and unlocks the latch of the back door lock assembly LWR when actuated by the No. 2 main body ECU.
Tail Gate Courtesy Switch Detects whether the tail gate is opened or closed. This switch turns ON when the tail gate is opened or ajar and OFF when the tail gate is closed.
Pawl Switch Detects the fully closed position.
Full Latch Switch Detects the fully closed position in case that the pawl switch malfunctions.
Half Latch Switch Detects the ajar position of the latch, turns OFF in the half latch condition.
Neutral Position Switch Detects the initial (neutral) position of the sector gear of the tail gate opener & closer motor. The switch is ON when the tail gate lock operates to the release side, and OFF when it operates to the close side.
Tail Gate Open Lever The tail gate opens when this lever is turned ON.
Power Back Door ECU Sends a sounding request signal to the power back door buzzer when the tail gate starts to close.
Power Back Door Buzzer Sounds for 0.8 seconds when the tail gate starts to close.
No. 2 Main Body ECU Transmits lock/unlock control signals to the back door lock assembly LWR.