Home › General › BODY ELECTRICAL › ENGINE IMMOBILISER SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269839 ENGINE IMMOBILISER SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  ENGINE IMMOBILISER SYSTEM  GENERAL/CONTROL/DETAILS  DESCRIPTION  


DESCRIPTION


a.

A standard grade specification engine immobiliser system has been added.


b.

The engine immobiliser system compares the ID code registered in the transponder key ECU with the ID code of the transponder chip embedded in the ignition key. The system unsets if these ID codes match. Thus, the transponder key ECU assembly and the ECM communicate with each other to authorize fuel injection and ignition*, enabling the engine to start.

*: Models with gasoline engine


c.

When replacing the transponder key ECU or making a new ignition key, key recognition code(s) must be registered. For details of the recognition code registration procedure, refer to the Service Bulletin.