Home › General › BODY ELECTRICAL › SEAT BELT REMINDER SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0267522 SEAT BELT REMINDER SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  SEAT BELT REMINDER SYSTEM  GENERAL/CONTROL/DETAILS  DESCRIPTION  


DESCRIPTION


a.

If a seat belt is not fastened, this system flashes the seat belt reminder light or sounds the buzzer in the combination meter assembly as a reminder.


b.

When the ignition switch is turned ON, this system detects the condition of the seat belts based on the signals from the front seat buckle switches (for the driver and front passenger) and the occupant detection sensor.



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)