Home › General › CHASSIS › AB60F AUTOMATIC TRANSMISSION
NM2660E _V1 General _054360 CHASSIS _0267094 AB60F AUTOMATIC TRANSMISSION UN GENERAL/CONTROL/DETAILS F

CHASSIS  AB60F AUTOMATIC TRANSMISSION  GENERAL/CONTROL/DETAILS  SHIFT CONTROL MECHANISM  


GENERAL


a.

A gate type shift lever is used.


b.

Shift pattern is provided with the S mode position on the side of the D position.


c.

A shift lock system is used.

X133315E01
4.698,0.698 4.781,0.198 4.781,0.198 4.938,0.198 true 4.656,1.552 4.896,1.823 4.896,1.823 5.146,1.823 true 4.979,0.125 7.063,1.083 2.083,0.958 10 false The shift lever can be moved only with the engine switch IG-ON and the brake pedal depressed. 5.219,1.74 7.01,2.365 1.792,0.625 10 false The shift lever can be moved at anytime.



SHIFT LOCK SYSTEM


a.

General

i.

The shift lock mechanism prevents the shift lever from being shifted to any position other than the P position, unless the IG-ON mode is selected, and the brake pedal is depressed. This mechanism helps to prevent unintentional acceleration.


ii.

The shift lock system mainly consists of the shift lock control ECU, shift lock solenoid P detection switch and shift lock override button.

System Diagram
X133316E01
2.635,2.917 4.823,3.5 2.188,0.583 10 false Shift Lock Control Assembly 0.958,0.906 3.146,1.49 2.188,0.583 10 false Stop Light Switch 1.021,1.844 3.208,2.427 2.188,0.583 10 false Main Body ECU 3.063,1.094 4.219,2.219 1.156,1.125 10 false Shift Lock Control ECU 4.656,2.552 6.844,3.135 2.188,0.583 10 false Shift Lock Solenoid Assembly 5.438,0.844 6.146,1.563 0.708,0.719 10 false Shift Lock Solenoid 5.448,1.906 6.25,2.396 0.802,0.49 10 false P Detection Switch




LAYOUT OF MAIN COMPONENTS


X133317C01
0.792,1.219 1.313,2.427 true 1.021,3.76 1.906,2.594 true 4.344,4.208 3.563,3.104 true 0.677,1.031 0.99,1.188 0.313,0.156 10 false *1 0.875,3.771 1.188,3.927 0.313,0.156 10 false *2 4.313,4.24 4.625,4.396 0.313,0.156 10 false *3
*1 Main Body ECU *2 Stop Light Switch
*3 Shift Lock Control ECU
·

P Detection Switch

·

Shift Lock Solenoid


- -



System Operation


a.

The shift lock ECU uses the P detection switch to detect the shift lever position, and receives inputs from the stop light switch and the main body ECU. Upon receiving these signals, the shift lock ECU turns ON the shift lock solenoid in order to release the shift lock.


b.

A shift lock override button, which manually overrides the shift lock mechanism, is used.