Home › General › BODY ELECTRICAL › SLIDING ROOF SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269835 SLIDING ROOF SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  SLIDING ROOF SYSTEM  GENERAL/CONTROL/DETAILS  SLIDING ROOF OPEN WARNING  


OPTITRON DISPLAY TYPE COMBINATION METER


a.

When the engine switch is changed from on (IG) to off and the driver door is opened when the sliding roof is open, the sliding roof ECU turns on the master warning light and sounds the buzzer in the combination meter assembly. Then, a warning message appears on the multi-information display.

Warning Condition The warning is activated if all of the following conditions are met:
·

Sliding roof is not fully closed.

·

Engine switch off.

·

Driver door is opened.


Combination Meter Assembly Multi-information Display Moon Roof Opened
Master Warning Light Blinks
Buzzer Sounds
Warning Stop Condition The warning is stopped when one of the following conditions is met:
·

Approximately 8 seconds have elapsed after the warning condition is detected.

·

Sliding roof is fully closed.

·

Engine switch on (IG).

·

Driver door is closed.





ANALOG TYPE COMBINATION METER


a.

When the engine switch is changed from on (IG) to off and the driver door is opened when the sliding roof is open, the sliding roof ECU sounds the buzzer in the combination meter assembly.

Warning Condition The warning is activated if all of the following conditions are met:
·

Sliding roof is not fully closed.

·

Engine switch off.

·

Driver door is opened.


Buzzer Sounds
Warning Stop Condition The warning is stopped when one of the following conditions is met:
·

8 seconds have elapsed after the warning condition is detected.

·

Sliding roof is fully closed.

·

Engine switch on (IG).

·

Driver door is closed.