Home › General › BODY ELECTRICAL › SLIDING ROOF SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269835 SLIDING ROOF SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  SLIDING ROOF SYSTEM  GENERAL/CONTROL/DETAILS  JAM PROTECTION  


JAM PROTECTION


a.

The Hall IC converts the changes in the magnetic flux that occur due to the rotation of the worm gear into pulse signals and outputs them to the sliding roof ECU.

Y197062C01
3.281,1.5 3,0.417 true 3.365,1.438 3.594,0.354 true 1.771,1.25 2.208,1.083 true 2.833,2.25 3.188,1.917 true 1.583,1.156 1.771,1.406 0.188,0.25 10 false *1 2.698,2.229 2.927,2.49 0.229,0.26 10 false *2 2.917,0.208 3.125,0.438 0.208,0.229 10 false *3 3.552,0.156 3.833,0.365 0.281,0.208 10 false *3
*1 Sliding Roof Motor *2 Sliding Roof ECU
*3 Hall IC - -



b.

To control the jam protection function, the sliding roof ECU monitors the amount of movement and judges jamming of the sliding roof based on the pulse signals from the Hall IC1, and the moving direction of the sliding roof from the phase difference between the pulsed from the Hall IC1 and Hall IC2.

Monitoring Amount of Movement Judgment of Jamming
Y197063E01
1.844,1.896 1.646,1.896 1.646,1.896 1.531,1.656 true 5.104,1.917 4.917,1.917 4.917,1.917 4.823,1.656 true 1.375,2.198 2.042,2.552 0.667,0.354 10 false Normal 4.594,2.229 5.26,2.583 0.667,0.354 10 false Jammed 5.156,1.813 6.427,2.167 1.271,0.354 10 false 1 Motor Revolution 1.885,1.792 3.229,2.156 1.344,0.365 10 false 1 Motor Revolution 0.219,0.792 1.292,1.208 1.073,0.417 10 false Hall IC1 Signal

Judgment of Movement Direction
Y197064E01
0.219,0.74 1.26,1.125 1.042,0.385 10 false Hall IC1 Signal 0.219,1.75 1.25,2.146 1.031,0.396 10 false Hall IC2 Signal 1.49,2.271 2.698,2.635 1.208,0.365 10 false Close / Tilt Up 4.729,2.281 6.052,2.677 1.323,0.396 10 false Open / Tilt Down