Home › General › BODY ELECTRICAL › WIPER AND WASHER SYSTEM
NM2660E _V1 General _054361 BODY ELECTRICAL _0269832 WIPER AND WASHER SYSTEM UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  WIPER AND WASHER SYSTEM  GENERAL/CONTROL/DETAILS  FAIL-SAFE  


FAIL-SAFE


a.

The following measures are taken as fail-safe when any malfunction is detected by the windshield wiper ECU.

Trouble Area Condition
Wiper Motor Malfunction Stops the operation of the rain sensing function.
Communication Signal Malfunction Rain Sensor:
·

Continuously performs a wiper operation prior to occurrence of a malfunction.

·

Switches to the intermittent operation if a malfunction of the rain sensor is detected when the power source is switched from IG-OFF to IG-ON or the wiper switch is in AUTO position.


Wiper Switch:
Continuously perform a wiper operation prior to occurrence of a malfunction.
Main body ECU (cowl side junction block LH), ECM and combination meter:
Continuously perform the LO operation.